1. Producte acabatview
The Miracase Car Phone Holder is designed to provide a secure and convenient mounting solution for your smartphone in your vehicle. Featuring a robust metal hook clip, it attaches firmly to most horizontal and vertical air vents, ensuring stability even on bumpy roads. Its universal design accommodates a wide range of smartphones (4.0-7.2 inches) and cases, offering 360-degree rotation for optimal viewing angles and one-hand operation for ease of use.
Image: The Miracase Car Phone Holder securely mounted on a car's air vent, holding a smartphone in portrait orientation.
2. Contingut del paquet
Si us plau, verifiqueu que tots els components siguin presents al vostre paquet:
- 1 x Miracase Car Phone Holder (Main Unit)
3. Pautes de seguretat
To ensure safe operation and prevent damage, please observe the following guidelines:
- No obstruïu el vostre view of the road or vehicle controls when installing the holder.
- Ensure the holder is securely attached to the air vent before placing your device.
- Avoid adjusting the holder or your phone while driving. Perform adjustments only when the vehicle is stationary.
- Do not expose the product to extreme temperatures or direct sunlight for prolonged periods, as this may affect its material integrity.
- Mantenir fora de l'abast dels nens.
4. Guia d'instal·lació
Follow these steps to install your Miracase Car Phone Holder:
- Identify Compatible Vent: The Miracase holder is designed for horizontal and vertical air vents. It is no suitable for round vents. Ensure your vent blades are less than 1.4 inches (3.6 cm) wide.
- Extend the Hook: Rotate the knob on the back of the holder counter-clockwise to extend the metal hook.
- Attach to Vent Blade: Carefully insert the extended metal hook onto one of your car's air vent blades. Ensure the hook fully grips the blade.
- Assegurar el titular: Once the hook is in place, rotate the knob clockwise to tighten the hook firmly onto the vent blade. This will secure the holder and prevent it from falling off. The silicone pad on the hook provides additional grip and protects your vent.
Image: Detailed diagram illustrating the steps to attach the metal hook to an air vent blade and tighten it by rotating the knob.
Image: Visual guide showing the two main steps for installation: extending the hook by rotating and then firmly hooking and attaching to the vent.
5. Instruccions de funcionament
Using your Miracase Car Phone Holder is simple and designed for one-hand operation:
- Inseriu el telèfon: Gently press the quick-release button located on the back of the holder. This will open the adjustable clamp arms. Place your smartphone into the cradle, ensuring it rests on the bottom foot.
- Telèfon segur: Once the phone is in place, the clamp arms will automatically close and tighten around your device, securing it firmly. The silicone pads on the arms and foot provide a non-slip grip and protect your phone from scratches.
- Ajustar Viewangle: The holder features a 360-degree rotatable ball joint. Loosen the nut behind the holder slightly, adjust your phone to the desired landscape or portrait orientation, and then tighten the nut to lock the angle.
- Remove Phone: To remove your phone, simply press the quick-release button again, and the clamp arms will open, allowing you to retrieve your device.
Image: A smartphone in the Miracase holder demonstrating 360-degree rotation for flexible viewing, with a navigation app displayed.
Image: Visual representation of the quick-release button and how to tighten the arms for one-hand operation.
6. Cura i Manteniment
To maintain the performance and appearance of your Miracase Car Phone Holder:
- Clean the holder regularly with a soft, damp tela.
- Eviteu utilitzar productes químics agressius, netejadors abrasius o dissolvents, ja que poden danyar els materials.
- Ensure the silicone pads on the clamp arms and hook are free from dust or debris to maintain optimal grip.
7. Solució De Problemes
If you encounter any issues with your Miracase Car Phone Holder, please refer to the table below:
| Problema | Causa possible | Solució |
|---|---|---|
| Holder is not stable or falls off the vent. | Hook not fully tightened; incompatible vent type; vent blade too wide/thin. | Ensure the knob is rotated clockwise until the hook is firmly secured. Verify your vent is horizontal or vertical and its blade width is within the 1.4-inch (3.6 cm) limit. |
| Phone does not fit or is loose in the holder. | Phone size outside compatible range; clamp arms not fully closed. | Confirm your phone is between 4.0-7.2 inches. Ensure the clamp arms are allowed to fully close around your device after insertion. |
| Cannot rotate the phone or adjust the angle. | Ball joint nut is too tight. | Loosen the nut behind the ball joint slightly, adjust the angle, then re-tighten the nut. |
8. Especificacions del producte
| Característica | Detall |
|---|---|
| Dimensions del producte | 3.19 x 2.52 x 4.92 polzades |
| Pes de l'article | 4.2 unces |
| Número de model | miracase car phone holder |
| Color | Negre fosc |
| Tipus de muntatge | Vent |
| Mides de telèfon compatibles | 4.0 - 7.2 polzades |
| Max Vent Blade Width | 1.4 polzades (3.6 cm) |
| Característiques especials | Military-Grade Metal Hook, One-hand Operation, 360° Flexible Rotation, Ultra-Stable, Supports Thick Cases |
Image: Detailed dimensions of the holder and examples of compatible phone sizes and case types.
9. Garantia i atenció al client
Miracase is committed to providing high-quality products and excellent customer service.
- Servei d'assistència: This product comes with 36 months of service support.
- Suport professional: For any product issues or inquiries, please contact our professional support team. A satisfying solution is promised.
For further assistance, please visit the official Miracase store or contact customer service through your purchase platform.
