1. Introducció
The WONDOM BEA1 is a high-fidelity Bluetooth 5.3 audio receiver and USB decoder designed to integrate modern wireless audio streaming into traditional home stereo systems. Featuring the advanced QCC5171 Bluetooth module and an independent ES9018K2M Audio DAC, it supports a wide range of audio codecs including aptX HD and LDAC, ensuring superior sound quality. This manual provides detailed instructions for setting up, operating, and maintaining your BEA1 device.
2. Producte acabatview
2.1 Característiques clau
- QCC5171 Bluetooth v5.3 Module, Supporting Various Codecs (SBC, AAC, aptX, aptX HD, LDAC)
- USB Type-C (5V, 0.5A) Power Input, Supporting Bluetooth v5.3 & UAC 2.0 USB Codec Input
- Independent ES9018K2M Audio DAC for enhanced audio performance
- Bluetooth / USB to Analog / Coaxial / Optical Converter
- Supports Bluetooth LE Audio Standard
- Supports 24bit/96kHz Sampling Rate and Maximum Transmission Rate of 990kbps
- 32/80MHz Dual Processor for optimized performance and power consumption
- External Bluetooth Antenna for long-distance connection and stable audio transmission
2.2 Components i interfícies
Panell frontal: Features a Bluetooth LED indicator and gold-plated RCA analog outputs (L/R channels) for connection to ampaltaveus o altaveus actius.
Panell posterior: Includes a Bluetooth antenna connector, Coaxial output, Optical output, and a USB Type-C port for both 5V power and USB audio data input.
QCC5171 Bluetooth Module: The core Bluetooth component supporting a wide array of codecs including SBC, AAC, aptX, aptX HD, aptX-Adaptive, aptX-Lossless, and LDAC for high-quality wireless audio.
ES9018K2M Audio DAC: An independent digital-to-analog converter chip ensuring precise and high-resolution audio conversion for optimal sound fidelity.
3. Guia de configuració
3.1 Connexió d'alimentació
The BEA1 is powered via its USB Type-C port. Connect the provided USB cable to the USB Type-C port on the rear of the BEA1 and the other end to a 5V DC power source (e.g., a USB wall adapter, power bank, or a computer's USB port). The device requires 5V, 0.5A for operation.
Powering the BEA1: Connect the USB-C cable to a 5V power adapter, power bank, or computer USB port.
3.2 Connexió de sortida d'àudio
Choose one of the following output methods to connect the BEA1 to your audio system:
- Sortida analògica (RCA): Connect RCA cables from the L/R analog output ports on the front of the BEA1 to the corresponding analog input ports on your amplifier, AV receiver, or active speakers.
- Sortida coaxial: Connect a coaxial digital audio cable from the Coaxial output port on the rear of the BEA1 to the coaxial digital input on your DAC or receiver.
- Sortida òptica: Connect an optical (TOSLINK) digital audio cable from the Optical output port on the rear of the BEA1 to the optical digital input on your DAC or receiver.
Opcions de sortida: The BEA1 offers Analog (RCA), Coaxial, and Optical outputs for versatile connectivity.
Typical Bluetooth Setup: Connect your Bluetooth device to the BEA1, and the BEA1's analog output to an amplifier i altaveus.
4. Instruccions de funcionament
4.1 Vinculació Bluetooth
- Ensure the BEA1 is powered on. The Bluetooth LED on the front panel will indicate its status (e.g., blinking for pairing mode, solid for connected).
- Al telèfon intel·ligent, la tauleta o l'ordinador, activeu el Bluetooth i cerqueu els dispositius disponibles.
- Select "BEA1" from the list of discovered devices to initiate pairing.
- Once successfully paired, the Bluetooth LED on the BEA1 will typically turn solid, and you can begin streaming audio.
4.2 USB Audio Playback (UAC 2.0)
The BEA1 can also function as a USB DAC for your computer. Connect the USB Type-C port on the BEA1 to a USB port on your computer using a USB-C to USB-A or USB-C to USB-C cable (depending on your computer's ports). Your computer should automatically recognize the BEA1 as an audio output device. Select "BEA1" as your audio output in your computer's sound settings.
USB Audio Connection: Connect the BEA1 to your computer via the USB-C port for direct audio playback.
5. Manteniment
To ensure the longevity and optimal performance of your WONDOM BEA1, follow these maintenance guidelines:
- Neteja: Use a soft, dry cloth to wipe the exterior of the device. Avoid using liquid cleaners, aerosols, or abrasive materials.
- Col·locació: Col·loqueu el dispositiu sobre una superfície estable i plana, allunyada de la llum solar directa, fonts de calor i humitat excessiva. Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat.
- Manipulació: Manipuleu el dispositiu amb cura. Eviteu deixar-lo caure ni sotmetre'l a impactes forts.
- Antena: Ensure the external Bluetooth antenna is securely attached and positioned for optimal signal reception.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de so. | Incorrect cable connection; incorrect input selected on amplifier/receiver; BEA1 not powered on; low volume on source device or ampmés viu. | Check all cable connections (power, audio). Ensure the correct input is selected on your amplifier/receiver. Verify the BEA1's Bluetooth LED is on. Increase volume on both the source device and your audio system. |
| No es pot emparellar amb un dispositiu Bluetooth. | BEA1 not in pairing mode; device too far; interference; previously paired with another device. | Ensure the Bluetooth LED is blinking (pairing mode). Move your device closer to the BEA1. Turn off Bluetooth on other nearby devices. Try forgetting "BEA1" from your device's Bluetooth list and re-pairing. |
| Poor audio quality/intermittent connection. | Weak Bluetooth signal; interference from other wireless devices; physical obstructions. | Ensure the external Bluetooth antenna is securely attached. Move the BEA1 closer to your Bluetooth source device. Minimize obstacles between the devices. Avoid placing the BEA1 near Wi-Fi routers or other strong wireless emitters. |
| USB audio not working. | Incorrect USB cable; computer driver issue; BEA1 not selected as audio output. | Ensure you are using a data-capable USB-C cable. Check your computer's sound settings and select "BEA1" as the output device. Try a different USB port on your computer. |
7. Especificacions
| Característica | Detall |
|---|---|
| Versió Bluetooth | 5.3 (QCC5171 Module) |
| Còdecs compatibles | SBC, AAC, aptX, aptX HD, LDAC, aptX-Adaptive, aptX-Lossless |
| Xip DAC | ES9018K2M |
| Entrades | Bluetooth, USB Type-C (UAC 2.0) |
| Sortides | Analog RCA (L/R), Coaxial, Optical |
| Sampling Rate (USB) | Fins a 24 bits/96 kHz |
| Max Transmission Rate (Bluetooth) | 990kbps (LDAC) |
| Entrada de potència | USB Type-C, 5V DC, 0.5A |
| Dimensions (L x A x A) | Aprox. 95.40 x 64.00 x 26.00 mm (3.75 x 2.52 x 1.02 polzades) |
| Pes | 9.17 unces |
| Fabricant | Electrònica segura |
Note: Dimensions are approximate based on provided diagrams.
BEA1 Dimensions: Detailed measurements of the device in millimeters and inches.
8. Garantia i Suport
The WONDOM BEA1 is manufactured by Sure Electronics. For warranty information, technical support, or service inquiries, please contact Sure Electronics directly or refer to the warranty card included with your product. Please retain your proof of purchase for warranty claims.
The product has successfully obtained FCC ID and CE certifications, ensuring compliance with rigorous regulatory standards for electronic devices.
Certificacions: The BEA1 is certified by FCC and CE, ensuring compliance with international standards.
