1. Introducció
This manual provides essential information for the safe and effective use of your Razor A6 and Razor A3 Kick Scooters. Please read this manual thoroughly before assembly or operation to ensure proper use and to prevent injury. Keep this manual for future reference.

Image: The Razor A6 (left) and Razor A3 (right) Kick Scooters, showcasing their distinct designs and wheel sizes.
2. Informació de seguretat
Riding a scooter can be a hazardous activity. Certain conditions may cause the equipment to fail without fault of the manufacturer. The product is intended for use in controlled environments, free from hazards. Always exercise caution and common sense when riding.
2.1 Precaucions generals de seguretat
- Always wear a helmet that fits properly and meets safety standards (e.g., CPSC, ASTM).
- Wear appropriate protective gear, including knee pads, elbow pads, and wrist guards.
- Wear athletic shoes with rubber soles. Do not ride barefoot or in sandals.
- Ensure all fasteners and components are securely tightened before each ride.
- No conduïu de nit o en condicions de poca visibilitat.
- Avoid riding on wet, oily, sandy, gravel, or uneven surfaces.
- Do not ride on public roads or in traffic. Obey all local traffic laws and regulations.
- Maximum rider weight for the A6 is 220 lbs (100 kg). The A3 has a similar weight limit, typically around 143 lbs (65 kg), but always verify specific product documentation.
- Recommended age for the A6 is 8 years and older. The A3 is also suitable for similar age ranges.
- Supervise children at all times when they are riding.
- Estigueu atents al vostre entorn i a altres vianants o vehicles.
2.2 Riding Conditions
The performance of the scooter, including speed and range, can vary based on factors such as rider weight, riding surface, incline, ambient temperature, and riding style (e.g., frequent stopping and starting vs. continuous cruising).

Image: A person wearing a helmet and riding the Razor A6 Kick Scooter, demonstrating safe operation.
3. Contingut del paquet
Your Razor A6 and A3 Kick Scooter bundle includes the following items:
- 1 x Razor A6 Kick Scooter (Silver)
- 1 x Razor A3 Kick Scooter (Silver with Red Wheels)
- Manual d'usuari (aquest document)
4. Muntatge i muntatge
Both the Razor A6 and A3 scooters come largely pre-assembled. The primary setup involves unfolding the scooter and adjusting the handlebar height.
4.1 Desplegament del patinet
- Col·loqueu el patinet sobre una superfície plana.
- Locate the folding mechanism near the front wheel (for A6) or at the base of the handlebar stem (for A3).
- Release the locking lever or pin according to the specific model's design.
- Carefully pull the handlebar stem upwards until it locks into the upright position. Ensure the locking mechanism is fully engaged and secure.
4.2 Ajust de l'alçada del manillar
- Localitza el tancament ràpidamp a la tija del manillar.
- Obriu l'alliberament ràpid clamp.
- Press the spring-loaded buttons on the side of the handlebar stem and slide the handlebars up or down to the desired height. The A6 features extra-tall handlebars, adjustable up to 42 inches (1067 mm).
- Ensure the buttons snap into one of the adjustment holes.
- Tanqueu el cl. d'alliberament ràpidamp securely. The clamp should be tight enough to prevent the handlebars from slipping during use.

Image: The Razor A6 Kick Scooter in its fully unfolded and assembled state, ready for use.

Image: The Razor A3 Kick Scooter in its fully unfolded and assembled state, highlighting its red wheels and handlebar grips.
5. Instruccions de funcionament
5.1 Conduint el scooter
- Place one foot firmly on the deck of the scooter, near the front.
- Use your other foot to push off the ground, propelling the scooter forward.
- Once you have gained momentum, place your pushing foot onto the deck behind your front foot.
- Maintain balance by leaning slightly in the direction of the turn and using the handlebars for steering.
5.2 Frenades
Both the A6 and A3 scooters feature a rear fender brake.
- To slow down or stop, gently press down on the rear fender with your heel.
- Apply steady pressure to the brake. Avoid sudden or hard braking, especially at high speeds, as this can cause loss of control.

Imatge: Una imatge detallada view of the rear wheel and fender brake mechanism on the Razor A6 Kick Scooter.

Imatge: Una imatge detallada view of the rear wheel and fender brake mechanism on the Razor A3 Kick Scooter.
6. Manteniment
Regular maintenance will extend the life of your Razor scooters and ensure safe operation.
- Neteja: Netegeu el patinet amb anunciamp cloth after each use. Avoid using harsh chemicals or abrasive cleaners.
- Comprovació dels elements de fixació: Periodically check all nuts, bolts, and screws to ensure they are tight. Loose fasteners can compromise safety and performance.
- Rodes: Inspect the wheels for wear and tear. Replace wheels if they show signs of significant damage or flat spots. The A6 features large 10-inch urethane wheels, and the A3 has larger urethane wheels for a smoother ride.
- Rodaments: If the wheels do not spin freely, the bearings may need cleaning or replacement.
- Fre: Ensure the rear fender brake is functioning correctly and provides adequate stopping power.
- Mecanisme de plegat: Keep the folding mechanism clean and free of debris. Ensure it locks securely in both the folded and unfolded positions. The A6 features a patent-pending anti-rattle folding mechanism.
- Emmagatzematge: Store the scooter in a dry, cool place away from direct sunlight and moisture.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Handlebars slip or wobble | Alliberament ràpid clamp is not tight enough; adjustment buttons not fully engaged. | Apretar el cl de llançament ràpidamp. Ensure adjustment buttons snap into place. |
| Wheels don't spin freely or make noise | Dirt/debris in bearings; worn bearings. | Clean wheels and bearings. If problem persists, replace bearings. |
| Brake is ineffective | Fender brake worn or misaligned. | Inspect the brake for wear. Ensure it makes full contact with the wheel. Contact Razor support if replacement is needed. |
| Scooter difficult to fold/unfold | Debris in folding mechanism; mechanism needs lubrication. | Clean the folding mechanism. Apply a small amount of silicone-based lubricant if necessary. |
If you encounter issues not listed here, or if solutions do not resolve the problem, please contact Razor customer support.
8. Especificacions
8.1 Razor A6 Kick Scooter
- Marca: Navalla
- Nom del model: Razor A6
- Color: Plata
- Material del marc: Alumini
- Nombre de rodes: 2
- Material de la roda: Uretan
- Mida de la roda: 10 polzades (254 mm)
- Tipus de roda: Sòlid
- Handlebar Type: Adjustable, Extra-Tall (up to 42 inches / 1067 mm)
- Longitud de la coberta: 13.4 polzades (340 mm)
- Característiques especials: Lightweight, Adjustable Handlebar Height, Anti-Rattle Technology (handlebars and folding mechanism)
- Estil de fre: Frenada posterior
- Usos recomanats: Urban commuting, Recreational riding
- Pes màxim del genet: Fins a 220 lliures (100 kg)
8.2 Razor A3 Kick Scooter
- Marca: Navalla
- Nom del model: Razor A3
- Color: Silver with Red Wheels
- Material del marc: Alumini
- Nombre de rodes: 2
- Material de la roda: Urethane (Larger wheels for smoother ride)
- Tipus de suspensió: Front Suspension (vibration dampening)
- Característiques especials: Lightweight, Foldable, Adjustable Handlebars, Wheelie Bar
- Estil de fre: Frenada posterior
- Usos recomanats: Recreational riding, Kid's transportation
9. Garantia i Suport
Razor products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Razor website. If you require technical assistance, replacement parts, or have questions regarding your scooter, please contact Razor customer support.
Razor Official Weblloc: www.razor.com
Informació de contacte: Refer to the Razor weblloc web per obtenir les dades de contacte més actualitzades, inclosos els números de telèfon i el correu electrònic d'assistència.





