1. Introducció
Thank you for choosing the Zimati Christmas Wreath Window Lights. This instruction manual provides important information regarding the safe setup, operation, and maintenance of your new window decoration. Please read this manual thoroughly before use and retain it for future reference.
2. Producte acabatview
The Zimati Christmas Wreath Window Light is a decorative LED light designed for indoor use. It features a 14-inch diameter wreath with a bow design, illuminated by 82 red and green LEDs. The light is USB-powered and includes a remote control for adjusting lighting modes and setting a timer.
Image 2.1: The Zimati Christmas Wreath Window Light, showcasing its red bow and green wreath outline with LEDs, displayed in a window setting.
3. Contingut del paquet
Si us plau, reviseu el paquet per assegurar-vos que hi ha tots els elements:
- 1 x Zimati 14-inch Christmas Wreath Window Light
- 1 x comandament a distància
- 2 x Suction Cup Hooks
- 1 x USB Power Cable (USB adapter not included)
Image 3.1: An illustration of the Zimati Christmas Wreath Window Light package contents, including the wreath light, remote control, two suction cup hooks, and the USB power cable.
4. Informació de seguretat
- Només per a ús interior: This product is designed for indoor decoration. Do not use it outdoors or expose it to rain or moisture.
- No resistent a l'aigua: The light is not water resistant. Avoid contact with water or damp ambients.
- Font d'alimentació: Use a standard USB power adapter (5V/1A recommended, not included) or a compatible USB port.
- Battery for Remote: The remote control requires one CR2 battery (not included). Ensure correct polarity when inserting.
- Eviteu el sobreescalfament: Do not cover the light or place it near heat sources.
- Manejar amb cura: The wreath frame is made of iron. Handle gently to avoid bending or damage.
5. Instruccions de configuració
- Col·loqueu ventoses: Ensure the surface where you intend to hang the wreath (e.g., glass window, ceramic tile) is clean and dry. Press the suction cup hooks firmly onto the desired surface.
- Hang the Wreath: Locate the hanging hole at the top of the wreath light. Carefully hang the wreath onto the attached suction cup hooks.
- Connectar l'alimentació: Plug the USB cable into a compatible USB power adapter (not included) or a USB port on a device such as a computer or power bank.
Image 5.1: A clear suction cup hook, used for hanging the wreath light.
Image 5.2: The Zimati Christmas Wreath Window Light securely hanging on a window, demonstrating the use of the suction cup hook.
Image 5.3: A diagram illustrating various compatible USB power sources for the wreath light, including a USB charger, USB socket, power bank, and computer.
6. Instruccions de funcionament
6.1 Ús del comandament a distància
The included remote control allows you to manage the light's functions. Ensure the remote has a CR2 battery installed (not included) and is pointed towards the USB receiver.
Image 6.1: The remote control for the Zimati Christmas Wreath Window Light, detailing buttons for power, timer, 8 lighting modes, and brightness adjustment.
- Botó ON/OFF: Premeu per encendre o apagar els llums.
- MODE Buttons (1-8): Press a numbered button to select one of the 8 lighting modes. To lock a specific mode, press and hold the corresponding mode number button for approximately 5 seconds.
- Botó TIMER: Activates the timer function (6 hours on, 18 hours off).
- DIM +/- Buttons: Ajusta el nivell de brillantor dels llums.
6.2 Using the USB Button
If the remote control is not available, you can cycle through the lighting modes by pressing the button located on the USB connector.
Imatge 6.2: Un primer pla view of the USB power cable, highlighting the integrated button for adjusting light modes directly.
6.3 modes d'il·luminació
The wreath light features 8 distinct lighting modes:
- Combinació
- En Onada
- Seqüencial
- Resplendor lent
- Flash
- Fade lent
- Brillar
- Encès constant
6.4 Funció de temporitzador
When the timer function is activated via the remote control, the lights will remain on for 6 hours and then automatically turn off for 18 hours. This cycle will repeat daily until the timer is deactivated.
7. Manteniment
- Neteja: Disconnect the power before cleaning. Wipe the wreath light gently with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Emmagatzematge: When not in use, store the wreath light in its original packaging or a protective container in a cool, dry place, away from direct sunlight and moisture.
- Substitució de la bateria remota: If the remote control stops responding, replace the CR2 battery.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Els llums no s'encenen. | No power supply; loose USB connection; faulty USB adapter. | Ensure USB cable is securely plugged into a working USB port/adapter. Try a different USB adapter or port. |
| El control remot no funciona. | CR2 battery is dead or incorrectly inserted; remote not pointed at receiver; obstruction. | Replace the CR2 battery, ensuring correct polarity. Point the remote directly at the USB receiver. Remove any obstructions between the remote and the receiver. |
| Lights change modes unexpectedly or do not stay on desired mode. | Mode not locked in. | After selecting a mode (1-8) with the remote, press and hold the corresponding mode number button for approximately 5 seconds to lock it. |
| La funció del temporitzador no funciona correctament. | Timer not activated; power interruption. | Press the TIMER button on the remote to activate. If power is interrupted, the timer may need to be reset. |
9. Especificacions
- Model: 0202002
- Dimensions: 13.8 x 0.02 x 13.8 polzades (L x A x A)
- Pes de l'article: 10.5 unces (0.3 quilograms)
- Font de llum: 82 LEDs (Red, Green)
- Font d'alimentació: USB (5 V)
- Voltage: 55 Volts (Input to LEDs, via USB conversion)
- Tipus de controlador: Remote Control, USB Button
- Modes d'il·luminació: 8
- Funció de temporitzador: 6 hores encès / 18 hores apagat
- Material: Marc de ferro
- Ús interior/exterior: Només interior
- Resistència a l'aigua: No resistent a l'aigua
- Bateria remota: 1 CR2 (no inclosa)
10. Garantia i Suport
For warranty information or technical support, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.