Manual d'usuari del mòdul de relé de retenció SPST OONO F-1060 AC/DC 12V

1. Introducció

The OONO F-1060 is an AC/DC 12V Single Pole Single Throw (SPST) latching relay module designed for various control applications. A key feature of this module is its power-off memory, which ensures that the output switch status remains unchanged even if the power supply is interrupted. This manual provides essential information for the safe and effective installation, operation, and maintenance of your F-1060 relay module.

2. Informació de seguretat

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electrical shock, fire, or property damage.

• Desconnecteu l'alimentació: Always disconnect power to the circuit before performing any installation, wiring, or maintenance.
• Personal qualificat: Installation and wiring should be performed by qualified personnel familiar with electrical systems and local electrical codes.
• Voltage i classificacions actuals: No excedeixi el vol especificattage and current ratings of the relay module.
• Tancament adequat: Ensure the module is installed in a suitable enclosure to protect it from environmental factors and accidental contact.
• Cablejat: Use appropriate wire gauges for the current load and ensure all connections are secure.

3. Producte acabatview

The OONO F-1060 is a compact, pre-wired latching relay module housed in a durable polycarbonate plastic enclosure. It features a Single Pole Single Throw (SPST) output switch and accepts AC/DC 12V input control signals. The module is designed for easy integration into various electrical systems, offering reliable power-off memory functionality.

Figura 3.1: Davant view of the OONO F-1060 Latching Relay Module, showing the product label with input and contact ratings, and wiring diagram for the internal relay.

4. Especificacions

Figura 4.1: Detailed dimensional drawing of the OONO F-1060 module, including measurements in millimeters and inches, and NPT 1/2" nipple details.

5. Contingut del paquet

Verifiqueu que tots els elements siguin presents i no estiguin danyats en obrir el paquet.

Figura 5.1: The OONO F-1060 Latching Relay Module shown with its pre-wired leads, NPT 1/2" zinc alloy conduit locknut, and two M3x50mm mounting screws.

• 1x OONO F-1060 Latching Relay Module (pre-wired)
• 1x NPT 1/2" Zinc alloy conduit locknut
• 2 cargols M3x50mm

6. Configuració i instal·lació

Follow these steps for proper installation of the relay module.

6.1 Muntatge

• The module features a NPT 1/2" mounting nipple, allowing flexible installation with a junction box or outlet box. Secure it using the provided zinc alloy conduit locknut.
• Two screw mounting holes are provided for fixing the module to a wall or wooden board using the supplied M3x50mm screws.

Figura 6.1: Examples demonstrating how the OONO F-1060 module can be installed within a standard electrical junction box using its NPT nipple and locknut.

6.2 Instruccions de cablejat

Refer to the wiring diagrams below for connecting the input control signal and the load. Ensure all connections are tight and insulated.

Figura 6.2: Comprehensive wiring diagrams illustrating connections for DC COM+ (Sink NPN), DC COM- (Source PNP), and AC input control signals. Each diagram shows the connection of the BLU ON, GRN OFF, YLW COM, RED, and BLK wires to the power source, control inputs, and the load.

• Input Control Wires:
  • BLU ON: Connect to the positive control signal to turn the relay ON.
  • GRN OFF: Connect to the positive control signal to turn the relay OFF.
  • YLW COM: Common wire for the input control signal.
• Output Switch Wires (SPST):
  • VERMELL: One side of the SPST switch.
  • BLK: The other side of the SPST switch.
• Connexió de càrrega: Connect your load (e.g., light, motor) in series with the RED and BLK wires and the power source for the load.
• Tipus de senyal d'entrada: The module supports AC, DC COM+ (Sink NPN), or DC COM- (Source PNP) input control signals. Ensure your control signal matches the module's requirements.

7. Instruccions de funcionament

The OONO F-1060 is a latching relay, meaning it maintains its state (ON or OFF) until a new control signal is received, even if power to the control circuit is removed.

• Encenent: Apply a momentary AC/DC 12V signal between the BLU ON wire and the YLW COM wire. The relay will switch to the ON state and remain ON.
• Apagant: Apply a momentary AC/DC 12V signal between the GRN OFF wire and the YLW COM wire. The relay will switch to the OFF state and remain OFF.
• Memòria d'apagada: If the main power supply to the module is interrupted, the relay's last state (ON or OFF) will be preserved. When power is restored, the relay will resume its previous state without requiring a new control signal.

8. Manteniment

The OONO F-1060 relay module is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure its longevity and performance.

• Inspecció visual: Inspeccioneu periòdicament el mòdul i el seu cablejat per detectar qualsevol signe de danys, connexions soltes o corrosió.
• Neteja: If necessary, gently clean the exterior of the module with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Condicions ambientals: Assegureu-vos que l'entorn operatiu es mantingui dins dels rangs de temperatura i humitat especificats per evitar fallades prematures.

9. Solució De Problemes

If you encounter issues with your OONO F-1060 relay module, refer to the following troubleshooting guide:

10. Garantia i Suport

OONO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact your retailer. Please have your product model number (F-1060) available when contacting support.