GLEDOPTO WLED Digital Strip Controller

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your GLEDOPTO WLED Digital Strip Controller (Model GL-C-008WL). This controller is designed to manage various LED strip types, offering extensive dynamic lighting modes and app control capabilities without the need for a separate hub.

Imatge: Més deview of the GLEDOPTO WLED Digital Strip Controller, showing its compact design and connectivity options.

Característiques del producte

• Vol. Amplitage Compatibilitat: Supports DC 5-24V power input.
• Chipset avançat: Equipped with a 4MB ESP8266 Chip, allowing for official WLED firmware upgrades.
• Extensive Dynamic Modes: Over 100 dynamic lighting modes available via the WLED app.
• Broad LED Strip Compatibility: Compatible with RGB, RGBW, WS2812B, WS2811, SK6812, TM1814, WS2813, and WS2815 LED strip types.
• Hub-Free Operation: Direct WiFi APP control without the need for an additional hub.
• High IC Quantity Support: Supports up to 800 ICs (Integrated Circuits) for complex lighting setups.

Contingut del paquet

• 1 x GLEDOPTO WLED Digital Strip Controller (Model GL-C-008WL)

Note: LED strips and power supply are sold separately and are required for operation.

Especificacions

Image: Illustration indicating the maximum 800 ICs supported by the controller. It is important to ensure the power supply is adequate if the number of ICs is large.

Informació de seguretat

• Assegureu-vos que la font d'alimentació voltage matches the controller's specifications (DC 5-24V).
• Do not exceed the maximum total current of 10A. Overloading can damage the device and pose a fire hazard.
• Install the controller in a dry environment, away from moisture and extreme temperatures.
• Disconnect power before making any wiring connections or disconnections.
• Mantenir fora de l'abast dels nens.

Configuració

1. Instruccions de cablejat

Carefully connect your LED strip and power supply to the controller as shown in the diagram below. The group of 'D' for GPIO2 is the default output and should be used first. The other group of 'D' is GPIO5, which can be configured via the app.

Image: Detailed wiring instructions for connecting the LED strip and power input to the controller's terminals. Note the GPIO2 and GPIO5 output groups.

1. Power Input (V+, V-): Connect your DC 5-24V power supply to the V+ and V- terminals. Ensure correct polarity.
2. LED Strip Output (G, D, V): Connect your LED strip to the output terminals. The default output is GPIO2.
   • G: Terra
   • D: Data (for addressable LED strips)
   • V: Voltage (for LED strips requiring direct voltagconnexió e)
3. Preparació del cable: For optimal connection, strip wires 9-10mm.

2. Instal·lació i connexió de l'aplicació

The GLEDOPTO WLED Digital Strip Controller uses the WLED app for control. Cerca "WLED" in your device's app store (iOS/Android) and install it. Follow the in-app instructions to connect the controller to your WiFi network and add it to the app.

Instruccions de funcionament

1. Basic Button Function

The controller features a physical button for basic control:

• Premsa curta: Toggles the LED strip On/Off.
• Long press (for 1 second): Switches the color or dynamic mode.

Image: Diagram illustrating the short press for On/Off and long press for color/mode switching on the controller's button.

2. Smart Phone APP Control

The WLED app provides comprehensive control over your LED strips. No gateway is required for app control.

Image: Screenshots of the WLED smartphone application interface, demonstrating color selection, effects, and device management.

• Selecció de color: Choose from a wide spectrum of colors using the color wheel or predefined palettes.
• Modes dinàmics: Access over 100 dynamic lighting modes for various effects and atmospheres.
• Segmented Color Control: Personalize individual segments of your LED strip to display different colors simultaneously.

Image: Visual representation of segmented color control, allowing users to apply different colors to distinct sections of an LED strip.

Compatibilitat

The GLEDOPTO WLED Digital Strip Controller is designed for high compatibility with various types of addressable LED strips, including:

• WS2812B
• WS2811
• SK6812
• SM16703P
• TM1814
• WS2813
• WS2815
• Other RGB and RGBW addressable LED strips.

Imatge: Examples of various compatible LED strip types, including WS2812B, SM16703P, SK6812, and WS2811.

Manteniment

The GLEDOPTO WLED Digital Strip Controller requires minimal maintenance.

• Neteja: Use a soft, dry cloth to wipe the controller. Do not use liquid cleaners or solvents.
• Medi ambient: Ensure the controller is kept in a clean, dry environment within the specified operating temperature range (-20 to 45°C).
• Actualitzacions de firmware: Periodically check the WLED community or official GLEDOPTO channels for firmware updates to ensure optimal performance and access to new features.

Resolució de problemes

• LED Strip Not Lighting Up:
  • Check power connections to the controller and LED strip. Ensure correct polarity (V+ to V+, V- to V-).
  • Comproveu la font d'alimentació voltage is within the DC 5-24V range and provides sufficient current for your LED strip (max 10A for controller).
  • Confirm the LED strip is correctly connected to the data (D) and ground (G) pins of the controller.
  • Ensure the correct LED strip type is selected in the WLED app configuration.
• Controller Not Connecting to WiFi/App:
  • Ensure your smartphone is connected to a 2.4GHz WiFi network during the initial setup process.
  • Restart the controller by disconnecting and reconnecting power.
  • Check if the controller is within range of your WiFi router.
  • If issues persist, try resetting the controller (refer to WLED documentation for specific reset procedures, often involving holding the button during power-up).
• Incorrect Colors or Effects:
  • Verify the LED strip type and color order settings in the WLED app match your specific strip.
  • Ensure the number of ICs configured in the app matches the actual number of ICs on your LED strip.

Informació de la garantia

GLEDOPTO products are typically covered by a limited warranty against defects in materials and workmanship. Please refer to the retailer's return policy or the official GLEDOPTO website for specific warranty terms and conditions applicable to your region and purchase date. Keep your proof of purchase for warranty claims.

Suport

For technical assistance, troubleshooting beyond this manual, or general inquiries, please visit the official GLEDOPTO website or contact their customer support. You may also find helpful resources and community support on the WLED project's official forums and documentation.

• GLEDOPTO Official Weblloc: www.gledopto.com (Nota: Això és un marcador de posició URL, si us plau, verifiqueu el funcionari real weblloc.)
• WLED Project Documentation: kno.wled.ge