1. Introducció
The Zalman P30 is a spacious Micro-ATX computer chassis designed to accommodate both Micro-ATX and Mini-ITX motherboards. It features panoramic frameless tempered glass panels for an unobstructed view of your internal components and comes with three pre-installed 120mm Addressable RGB fans for enhanced cooling and aesthetics. This manual provides essential information for the proper assembly, operation, and maintenance of your P30 case.
Figure 1: The Zalman P30 Micro-ATX Case showcasing its panoramic tempered glass and internal components with RGB lighting.
2. Informació de seguretat
- Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
- Handle tempered glass panels with care to prevent breakage. Avoid impacts or dropping the panels.
- Wear an anti-static wrist strap or frequently touch a grounded metal object to prevent electrostatic discharge (ESD) when handling internal components.
- Be cautious of sharp edges inside the chassis during installation.
- Keep the case and its components away from liquids and excessive humidity.
3. Contingut del paquet
Verify that all listed components are included in your package:
- Zalman P30 Micro-ATX Case
- 3 x 120mm Addressable RGB Fans (pre-installed)
- Accessory Box (containing various screws, anti-vibration rings, cable ties, etc.)
- Manual d'usuari (aquest document)
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Zalman |
| Nom del model | P30 |
| Tipus de cas | Mini-torre |
| Compatibilitat amb la placa base | Micro-ATX, Mini-ITX |
| Dimensions del producte (LxWxH) | 17.12 x 9.25 x 16.89 polzades |
| Pes de l'article | 26.2 lliures |
| Material | Acer d'aliatge, plàstic, vidre temperat |
| Ventiladors preinstal·lats | 3 x 120mm ARGB (2x Side Intake, 1x Rear Exhaust) |
| Ports d'E / S frontals | 1x USB-C, 1x USB 3.0, 1x Stereo/Mic 3.5mm AUX, Power Button w/ LED |
| Alçada màxima del refrigerador de la CPU | 173 mm |
| Longitud màxima de la GPU | 420 mm |
| Suport del radiador (superior) | Fins a 360 mm |
| Tipus de muntatge de la font d'alimentació | Muntatge inferior |
Figure 2: Detailed dimensions of the Zalman P30 chassis.
5. Configuració
5.1. Instal·lació de la placa base
The Zalman P30 supports Micro-ATX and Mini-ITX motherboards. Ensure your motherboard's form factor is compatible before proceeding.
- Remove the tempered glass side panel by gently pulling it open.
- Install the necessary motherboard standoffs. The case comes with pre-installed standoffs, and additional ones are provided in the accessory box if needed.
- Col·loca amb cura la placa base sobre els separadors, alineant els forats dels cargols.
- Fixeu la placa base amb els cargols proporcionats.
Figure 3: Motherboard compatibility for the P30 case.
5.2. Instal·lació de la font d'alimentació
The power supply unit (PSU) is mounted at the bottom of the case.
- Feu lliscar la font d'alimentació al compartiment corresponent a la part inferior posterior de la carcassa.
- Secure the PSU using the screws provided in the accessory box.
- Connect the necessary power cables to your motherboard and other components.
5.3. Instal·lació del dispositiu d'emmagatzematge
The case supports 2.5" SSDs and 3.5" HDDs.
- Locate the storage drive bays/mounts within the chassis.
- Mount your 2.5" SSDs or 3.5" HDDs using the appropriate screws and anti-vibration rings from the accessory box.
5.4. Instal·lació de la targeta gràfica
The Zalman P30 supports graphics cards up to 420mm in length.
- Traieu les cobertes de les ranures PCIe necessàries de la part posterior de la carcassa.
- Insert your graphics card into the primary PCIe slot on your motherboard.
- Fixeu la targeta gràfica amb cargols.
- Utilize the pre-installed anti-sag bracket to support heavier graphics cards. Adjust its position and height as needed.
5.5. Instal·lació del ventilador i del radiador
The case comes with three pre-installed 120mm ARGB fans. Additional cooling options are available:
- A dalt: Supports up to 360mm radiators or 3x 120mm / 2x 140mm fans.
- lateral: Supports 2x 120mm fans (pre-installed as intake).
- posterior: Supports 1x 120mm fan (pre-installed as exhaust).
- A baix: Supports 3x 120mm / 2x 140mm fans.
Figura 4: Mésview of fan specifications and pre-installed ARGB fans.
5.6. Gestió de cables
The Zalman P30 features enhanced cable organization to maintain a clean build.
- Route all cables through the designated cutouts and rubber grommets behind the motherboard tray.
- Use the included cable ties to bundle and secure cables, preventing interference with airflow and maintaining a tidy interior.
Figure 5: Cable management features of the P30 case.
6. Instruccions de funcionament
After completing the assembly, ensure all connections are secure before powering on your system.
- Encès/apagat: Use the power button located on the front I/O panel.
- ARGB Control: The pre-installed ARGB fans can be customized via a 3-pin header connection to your motherboard's ARGB header. Use your motherboard's software to control lighting effects.
- E / S davantera: Connect peripherals to the USB-C, USB 3.0, and 3.5mm audio jacks on the front panel.
Figure 6: Front I/O panel details.
7. Manteniment
Un manteniment regular ajuda a garantir un rendiment òptim i una llarga vida útil dels components del teu PC.
- Filtres de pols: The case features magnetic dust filters on the top and bottom panels. Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup.
- Eliminació del panell: The panoramic tempered glass front and side panels are tool-less and easily removable for cleaning and access to internal components.
Figure 7: Instructions for removing top panel and bottom dust filter.
8. Solució De Problemes
Si teniu problemes, tingueu en compte els passos habituals següents per resoldre'ls:
- Sense energia: Ensure the PSU is properly connected to the wall outlet and the motherboard. Check the PSU's on/off switch.
- Sense pantalla: Verify that the graphics card is correctly seated in its PCIe slot and connected to the monitor. Check all power connections to the GPU.
- Fan/RGB Issues: Confirm that all fans and ARGB cables are securely connected to the motherboard or a dedicated controller. Check motherboard software for ARGB settings.
- Sobreescalfament: Ensure all fans are spinning correctly and dust filters are clean. Verify proper CPU cooler installation.
9. Vídeo del producte
Vídeo 1: Producte oficial acabatview of the Zalman P30 Spacious Mini Tower Gaming PC Case, demonstrating its features and design.
10. Garantia i Suport
Zalman products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official Zalman weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
For technical support or customer service, please contact Zalman customer support through their official channels. Contact information can typically be found on the Zalman weblloc web o a la documentació del producte.
