1. Introducció
The Stetsom EQX764-7 Band Equalizer is a high-performance car audio graphic equalizer designed to provide precise control over your vehicle's sound system. This unit features a pre-amplifier and a 10V line driver, which helps to minimize noise and deliver a strong, clear audio signal to your amplifiers. With 7 adjustable equalization bands, dedicated subwoofer controls, and multiple input/output options, the EQX764 allows for detailed sound customization to suit your preferences.
2. Informació de seguretat
- Instal·lació professional recomanada: For optimal performance and safety, installation by a qualified car audio technician is highly recommended.
- Desconnecta la bateria: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and damage.
- Fusió correcta: Ensure the power connection includes an appropriate fuse (1A maximum, within 1 foot of the battery) to protect the unit and your vehicle's electrical system.
- Eviteu la humitat: No exposeu la unitat a l'aigua ni a una humitat excessiva.
- Muntatge segur: Mount the equalizer securely to prevent it from becoming a projectile in the event of sudden stops or accidents.
- Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
3. Contingut del paquet
Si us plau, comproveu el paquet per veure si hi ha els elements següents:
- Stetsom EQX764-7 Band Equalizer Unit
- Suports de muntatge
- High Input Connector (Wire)
- Cargols de muntatge
4. Producte acabatview
The Stetsom EQX764 features a user-friendly layout with clearly labeled controls and connections. Understanding each component is essential for proper setup and operation.
Controls del panell frontal
The front panel provides access to all audio adjustment controls, illuminated by blue LEDs for visibility.
- SUB NIVELL: Ajusta el nivell de sortida del canal de subwoofer.
- SUB FREQ: Adjusts the crossover frequency for the subwoofer output.
- HIGH/MAIN Input Switch: Selects between High-Level input and RCA (Main) input.
- ALT NIVELL: Adjusts the input sensitivity for the High-Level input.
- NIVELL PRINCIPAL: Adjusts the input sensitivity for the RCA (Main) input.
- FADER FRONT/REAR: Equilibra la sortida d'àudio entre els canals frontal i posterior.
- 7-Band Equalization Controls: Individual rotary controls for adjusting the gain (+/-12dB) at specific frequencies: 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, and 16KHz.
Connexions del panell posterior
The rear panel houses all input and output connections.
- R SUB L OUT: Left and Right RCA outputs for the subwoofer ampmés viu.
- ALTA EN: Entrada d'alt nivell per connectar-se a unitats principals de fàbrica sense sortides RCA.
- R MAIN L IN: Left and Right RCA inputs for the main audio source.
- R REAR L OUT: Left and Right RCA outputs for the rear full-range ampmés viu.
- R FRONT L OUT: Left and Right RCA outputs for the front full-range ampmés viu.
- REM +: Remote turn-on input and power input terminals.
5. Configuració i instal·lació
Follow these steps for proper installation of your EQX764 equalizer.
5.1 Muntatge de la unitat
Use the provided mounting brackets and screws to secure the EQX764 in a suitable location within your vehicle. Ensure the location allows for easy access to controls and adequate ventilation.
5.2 Power and Remote Activation
Connect the EQX764 to your vehicle's electrical system as follows:
- Connecteu el +12V terminal to the vehicle's positive battery terminal using a 20AWG cable. Install a 1A fuse within 1 foot of the battery.
- Connecteu el GND terminal to a clean chassis ground point.
- Connecteu el REM (remote) terminal to the remote output of your car radio/player using a 20AWG cable. This will turn the equalizer on and off with your head unit.
5.3 Connexions d'àudio
The EQX764 supports both RCA and High-Level inputs and provides dedicated outputs for front, rear, and subwoofer channels.
- Font d'entrada:
- For head units with RCA outputs, connect the RCA cables from your head unit to the R MAIN L IN ports on the EQX764.
- For factory head units or those without RCA outputs, use the provided High Input Connector to connect speaker-level wires from your head unit to the HIGH-IN terminals.
- Sortida a Ampelevadors:
- Connect RCA cables from the R FRONT L OUT ports to your front full-range ampmés viu.
- Connect RCA cables from the R REAR L OUT ports to your rear full-range ampmés viu.
- Connect RCA cables from the R SUB L OUT ports to your subwoofer ampmés viu.
6. Instruccions de funcionament
Once installed, the EQX764 allows for fine-tuning of your audio system.
6.1 Input Selection and Level Adjustment
- Seleccioneu l'entrada: Utilitza el HIGH/MAIN switch to select the appropriate input source (High-Level or RCA).
- Ajusta el nivell d'entrada: Utilitza el ALT NIVELL or NIVEL PRINCIPAL knobs to match the output voltage of your head unit. Start with these controls at their minimum and slowly increase until a clear, undistorted sound is achieved at a moderate volume from your head unit.
6.2 Fader Control
El FADER FRONT/REAR knob allows you to adjust the balance of sound between your front and rear speakers. Turn it towards 'FRONT' to emphasize front speakers or towards 'REAR' for rear speakers.
6.3 7-Band Equalization
Each of the seven rotary knobs corresponds to a specific frequency band, allowing you to boost or cut frequencies by up to 12dB. Adjust these controls to shape the sound to your preference:
- 50Hz: Controls the deepest bass frequencies.
- 125Hz: Affects mid-bass and warmth.
- 315Hz: Influences the lower midrange, body of vocals and instruments.
- 750Hz: Controls the central midrange, clarity of vocals.
- 2.2 KHz: Affects upper midrange, presence of instruments.
- 6 KHz: Controls lower treble, brightness of cymbals and higher frequencies.
- 16 KHz: Adjusts the highest treble frequencies, airiness and sparkle.
6.4 Subwoofer Controls
The dedicated subwoofer controls provide precise management of your bass output:
- SUB NIVELL: Adjust the overall volume of the subwoofer output.
- SUB FREQ: Set the low-pass crossover frequency for the subwoofer. This determines the highest frequency that will be sent to your subwoofer amplifier. Adjust this to blend seamlessly with your main speakers.
7. Especificacions
| Característica | Especificació |
|---|---|
| Entrades | MAIN (RCA) and HIGH IN (Wire) |
| Sortides | SUB OUT, FRONT and REAR |
| SUB Level and Frequency Control | Sí |
| Selector d'entrada | MAIN and HIGH |
| Controls de nivell | MAIN and HIGH |
| Control de fader | FRONTAL I TRASERA |
| Bandes d'equalitzador | 7-band (-12dB = +12dB) |
| SUB Frequency Control Range | 60 Hz - 90 Hz |
| V OUT @ 14.4V (Subwoofer) | 10 V RMS |
| V OUT @ 14.4V (Front & Rear) | 8.5V RMS (Line Driver) |
| Input Sensitivity (Main RCA) | 3.3V RMS @ 14.4V |
| Input Sensitivity (High Wire) | 25V RMS @ 14.4V |
| Input Impedance (Main RCA) | 20 K ohms |
| Input Impedance (High Wire) | 1 K ohms |
| Impedància de sortida | 47 ohms |
| Resposta de freqüència | 5Hz - 140KHz |
| THD | < 0.1% |
| SNR | > 100 dB |
| Conversació | > 85 dB |
| Subministrament Voltage | 9 V - 16 V CC |
| Max Consumption @ 12.6V | 290 mA |
| Dimensions (L x A x A) | 7.25" x 3.24" x 1" (184 x 82.3 x 26 mm) |
| Pes | 0.68 lb / 310 grams |
8. Solució De Problemes
If you encounter issues with your EQX764, refer to the following common problems and solutions:
- Sense energia:
- Check all power connections (+12V, GND, REM) for secure contact.
- Verify the 1A fuse near the battery is intact. Replace if blown.
- Ensure the remote wire from the head unit is providing a +12V signal when the head unit is on.
- Sense sortida de so:
- Confirm the correct input source (HIGH or MAIN) is selected via the switch.
- Check all RCA and High-Level input/output connections for proper seating.
- Ensure the HIGH LEVEL and MAIN LEVEL controls are not set to minimum.
- Verify that connected amplifiers are powered on and receiving a signal.
- So distorsionat:
- Reduce the HIGH LEVEL or MAIN LEVEL input sensitivity.
- Lower the gain settings on your ampaixecadors.
- Ensure none of the equalization bands are boosted excessively.
- Hissing or Engine Noise:
- Ensure the EQX764 and all amplifiers have a solid, clean ground connection.
- Route RCA cables away from power cables to prevent interference.
- Check for proper grounding of the head unit.
9. Manteniment
The Stetsom EQX764 is designed for durability and requires minimal maintenance.
- Neteja: Feu servir un drap suau i sec per netejar la unitat. Eviteu productes de neteja o dissolvents abrasius.
- Connexions: Reviseu periòdicament totes les connexions del cablejat per assegurar-vos que estiguin ben fixades i sense corrosió.
10. Garantia i Suport
Stetsom products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Stetsom weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
For additional assistance, you may contact Stetsom customer support through their official channels.
