1. Introducció
This manual provides instructions for the safe and efficient use of your Luceco LED Headlamp, model LILH33P65-02. This headlamp is a versatile lighting solution featuring USB-C recharging, a powerful 350 lumen output, and a motion sensor for hands-free operation. It is designed for various applications, including work and outdoor activities.
Si us plau, llegiu aquest manual detingudament abans d'utilitzar el producte i conserveu-lo per a futures consultes.
Figure 1: Luceco LED Headlamp LILH33P65-02. This image shows the front view del capamp, highlighting its main LED light, two red side lights, and the black adjustable headband with the 'Luceco' logo.
2. Informació de seguretat
Per garantir un funcionament segur, seguiu sempre aquestes precaucions de seguretat bàsiques:
- No mireu directament a la llum LED quan estigui encesa, ja que pot causar una discapacitat visual temporal.
- Keep the device away from water and moisture, despite its IP44 rating, to prevent electrical hazards.
- No intenteu desmuntar ni modificar el capçalampAixò anul·larà la garantia i pot causar danys o lesions.
- Mantenir fora de l'abast dels nens.
- Use only the provided USB charging cable or a certified equivalent.
- Eviteu exposar el capamp a temperatures extremes.
3. Configuració
3.1 Desembalatge i components
En obrir el paquet, assegureu-vos que hi hagi tots els components:
- 1 x Luceco LED Headlamp (LILH33P65-02)
- 1 x cable de càrrega USB
- 1 x Corretja ajustable per al cap
3.2 Attaching the Head Strap
Thread the adjustable head strap through the designated slots on the headlamp body. Adjust the strap to fit comfortably and securely around your head.
3.3 Càrrega inicial
Abans del primer ús, carregueu completament el capçalamp. Connect the supplied USB charging cable to the headlamp's charging port and to a standard USB power source (e.g., computer, wall adapter). The charging indicator will show the charging status (specific indicator behavior not detailed in source, so keep generic).
A full charge provides approximately 2.5 hours of operation at full power or 7 hours at minimum power.
4. Instruccions de funcionament
4.1 Engegada/Apagada i Selecció de Mode
El capamp features a single button for power control and mode cycling:
- Premeu el botó d'engegada una vegada per girar el capçalamp ACTIVAT.
- Subsequent presses will cycle through the 5 operating modes:
- 100% Brightness (Main LED)
- 50% Brightness (Main LED)
- Flashing (Main LED)
- Red Light (Side LEDs)
- Flashing Red Light (Side LEDs)
- Manteniu premut el botó d'encesa per encendre el capamp OFF.
4.2 Motion Sensor (Hands-Free Function)
El capamp is equipped with a motion sensor (PIR) for contactless on/off functionality. This feature allows you to activate or deactivate the light with a wave of your hand, ideal for situations where your hands are occupied or dirty.
- To activate the motion sensor, ensure the headlamp is ON and then press the dedicated sensor button (if available, otherwise assume it's part of the main button cycle or automatic).
- Once activated, wave your hand in front of the sensor to toggle the light on or off.
Note: Proximity to reflective surfaces or rapid head movements might affect sensor performance.
4.3 Incrementasing Lumens with COB LED Ring
For increased brightness, the headlamp features a COB LED ring. Activate this by following the specific button sequence or mode selection (details not provided in JSON, so keep generic).
4.4 Adjusting the Beam Angle
El capamp can be tilted up to 60 degrees. Gently adjust the lamp body to direct the light beam as needed for various applications.
5. Manteniment
5.1 Neteja
Netegeu el capamp cos amb un suau, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port is free of dust and debris.
5.2 Cura de la bateria
El capamp uses a built-in Lithium-ion battery. To prolong battery life:
- Eviteu descarregar completament la bateria amb freqüència.
- Carregueu el capamp regularly, even if not in frequent use.
- Guardeu el capamp en un lloc fresc i sec quan no s'utilitzi durant períodes prolongats.
5.3 Emmagatzematge
En guardar el capçalamp, ensure it is turned off. Detach the head strap if desired for compact storage. Keep it away from direct sunlight and extreme temperatures.
6. Solució De Problemes
If you encounter issues with your Luceco LED Headlamp, consulteu els problemes i solucions habituals següents:
| Problema | Causa possible | Solució |
|---|---|---|
| Capamp no s'encén. | La bateria està esgotada. | Carregueu el capamp plenament. |
| Capamp no s'encén. | Mal funcionament del botó d'engegada. | Ensure the button is pressed firmly. If issue persists, contact support. |
| El sensor de moviment no respon. | Sensor is not activated or obstructed. | Ensure the sensor mode is active. Clear any obstructions in front of the sensor. Avoid rapid movements or reflective surfaces. |
| Durada de la bateria curta. | Bateria no completament carregada o bateria envellida. | Ensure a full charge. If the battery life significantly degrades over time, it may be reaching the end of its lifespan. |
If the problem persists after attempting these solutions, please contact Luceco customer support.
7. Especificacions
| Característica | Detall |
|---|---|
| Número de model | LILH33P65-02 |
| Dimensions (L x A x A) | 3.8 x 4.6 x 7 cm |
| Pes | 103 grams |
| Tipus de bateria | 1 bateria de liti-ió (inclosa) |
| Font d'alimentació | Battery powered (USB rechargeable) |
| Tipus de font de llum | LED (Main LED + COB LED ring) |
| Brillantor blanc | 350 lúmens |
| Temperatura de color | 6500K |
| Classificació de protecció d'entrada (IP). | IP44 |
| Material | Policarbonat |
| Angle ajustable | Fins a 60° |
| Run Time (Full Power) | 2.5 hores |
| Run Time (Minimum Power) | 7 hores |
| Característica especial | Contactless On/Off (Motion Sensor) |
8. Garantia i Suport
8.1 Informació de la garantia
Luceco products are manufactured to high standards and are subject to rigorous quality control. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official Luceco weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
The warranty does not cover damage caused by improper use, unauthorized modifications, accidents, or normal wear and tear.
8.2 Atenció al client
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Luceco customer support through their official weblloc web o la informació de contacte que s'inclou amb l'embalatge del producte.
Normalment podeu trobar les dades de contacte d'assistència a la pàgina web del fabricant weblloc: www.luceco.com
