Pulsar GX400BN Inverter Generator Instruction Manual

Introducció

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Pulsar GX400BN 4000W Portable Ultra-Quiet Dual Fuel Inverter Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

Figura 1: Principal view of the Pulsar GX400BN Inverter Generator.

Característiques clau

• Capacitat de doble combustible: Operates on both gasoline (4000 peak watts / 3200 running watts) and propane (3600 peak watts / 2800 running watts).
• Funcionament ultra silenciós: Produces approximately 62dB at half-load, suitable for various environments.
• CO Sentry Carbon Monoxide Shutoff: Funció de seguretat millorada que apaga automàticament el generador si els nivells de monòxid de carboni es tornen perillosos.
• Disseny portàtil: Equipat amb una nansa telescòpica i rodes per facilitar el transport.
• RV-Ready: Features a dedicated AC 120V 30A outlet for recreational vehicle use.
• Múltiples punts de venda: Includes AC 120V 20A outlets, USB-A, and USB-C ports for versatile power options.
• Capacitat paral·lela: Allows connection of two GX400BN units for increased power output.
• Efficient Engine: Powered by a high-speed 5.5HP 149cc engine.
• Proteccions de seguretat: Features overload protection, short circuit protection, and low oil shutdown.

Figure 2: Key features of the generator, highlighting Recoil Start and Eco Switch.

Configuració

1. Preparació Inicial

Before first use, ensure the generator is placed on a flat, stable surface in a well-ventilated area, away from any combustible materials. The generator is shipped without oil or fuel.

Afegint oli de motor

1. Locate the oil fill cap/dipstick on the side of the generator.
2. Traieu el tap/varilla d'ompliment d'oli.
3. Carefully add the recommended 10W-30 engine oil (provided) into the oil fill opening. The capacity is approximately 0.6 liters (20.3 fl oz).
4. Comproveu el nivell d'oli amb la vareta de mesura; ha d'estar al límit superior.
5. Col·loqueu de nou el tap/vareta d'ompliment d'oli de manera segura.

Figura 3: lateral view of the generator, indicating the oil fill location.

Adding Fuel (Gasoline or Propane)

• Gasolina: Unscrew the fuel cap and carefully pour unleaded gasoline into the fuel tank. Do not overfill. The tank capacity is 1.18 gallons.
• Propà (GLP): Connect a standard propane tank (not included) to the LPG inlet on the control panel using the provided propane hose. Ensure all connections are tight.

Figura 4: Frontal view of the generator, showing the fuel cap and control panel with LPG inlet.

Posada a terra del generador

For safety, always ground the generator before operation. Connect a grounding wire (not included) from the generator's grounding terminal to an appropriate grounding rod or approved grounding source.

Figure 5: Close-up of the control panel, showing the grounding terminal.

Instruccions de funcionament

Inici del generador

1. Ensure the generator is properly set up and fueled.
2. Gireu l'interruptor del motor a la posició "ON".
3. If starting on gasoline, apply choke as needed. If starting on propane, ensure the propane tank valve is open.
4. Estireu fermament la maneta de l'arrencador de retrocés fins que el motor arrenqui.
5. Once started, gradually return the choke to the "RUN" position if used.

Ús de Outlets

The GX400BN offers various outlets for different power needs:

• Preses de corrent AC 120V 20A: Standard household outlets for general appliances.
• AC 120V 30A RV Outlet: Designed for RV hookups.
• Ports USB-A i USB-C: For charging sensitive electronics like phones and tablets.

Figure 6: Generator in use, powering various devices.

Mode Eco

The Eco Switch allows the generator to automatically adjust engine speed to match the load, improving fuel efficiency and reducing noise. Turn the Eco Switch "ON" for lighter loads and "OFF" for full power or heavy loads.

Operació paral·lela

For increased power, two Pulsar GX400BN generators can be connected in parallel using a compatible parallel kit (sold separately). Refer to the parallel kit's instructions for detailed setup.

Figure 7: Two GX400BN generators connected for parallel operation.

Official Product Video: Pulsar GX400BN Overview

Manteniment

Regular maintenance is crucial for the longevity and optimal performance of your generator. Always turn off the engine and allow it to cool before performing any maintenance.

Canvi d'oli

Change the engine oil after the first 20 hours of operation, and then every 100 hours or annually, whichever comes first. Refer to the oil fill section for location. Ensure the engine is warm for easier draining.

Inspecció/substitució de bugies

Inspect the spark plug every 100 hours or annually. Clean or replace if necessary. Use only the recommended spark plug type.

Neteja del filtre d'aire

Check and clean the air filter regularly, especially in dusty conditions. A dirty air filter can reduce engine performance and increase fuel consumption.

Emmagatzematge

For long-term storage, drain the fuel tank and carburetor (if using gasoline), or disconnect the propane tank. Store the generator in a clean, dry place.

Resolució de problemes

Especificacions

Figure 8: Dimensions of the Pulsar GX400BN Inverter Generator.

Garantia i Suport

The Pulsar GX400BN Inverter Generator comes with a Garantia del fabricant de 3 anys. For warranty claims, technical support, or replacement parts, please contact Pulsar customer service. Keep your proof of purchase for warranty validation.

For additional support and resources, visit the official Pulsar weblloc web o consulteu la informació de contacte que es proporciona a l'embalatge del producte.