1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your ID-COOLING AF-127-K-TRIO 120mm ARGB Case Fans. These fans are designed to deliver efficient cooling performance and vibrant ARGB lighting for your computer system.
Image 1.1: The ID-COOLING AF-127-K-TRIO 120mm ARGB Case Fans.
2. Contingut del paquet
- ID-COOLING AF-127-K-TRIO 120mm ARGB Case Fans (3-pack)
- Cargols de muntatge
- Manual d'usuari
3. Configuració i instal·lació
Follow these steps to properly install your ID-COOLING AF-127-K-TRIO fans into your computer case, CPU air cooler, or radiator.
- Prepareu el vostre sistema: Apagueu l'ordinador i desconnecteu-lo de la font d'alimentació. Obriu la carcassa de l'ordinador per accedir a les ubicacions de muntatge del ventilador.
- Muntatge dels ventiladors: Position the fans in your desired location (e.g., front intake, rear exhaust, top exhaust, or on a radiator/CPU cooler). Use the provided mounting screws to secure each fan. Ensure the airflow direction is correct for your cooling configuration.
- Potència de connexió: The fans utilize a daisy chain connector for simplified cable management. Connect the first fan's power cable to an available fan header on your motherboard or fan controller. Then, connect subsequent fans to each other using the daisy chain connectors.
- Connexió de la il·luminació ARGB: Connect the ARGB cable from the first fan to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller. If daisy-chaining, connect the ARGB cables of subsequent fans to the previous one. Nota: Assegureu-vos de connectar-lo a un capçal ARGB de 5V, no a un capçal RGB de 12V, per evitar danys.
- Gestió de cables: Route all cables neatly to ensure optimal airflow and a clean aesthetic within your case.
- Comprovació final: Double-check all connections before closing your computer case and powering on your system.
Image 3.1: Fan with mounting screws for installation.
Image 3.2: Daisy chain connector for simplified wiring.
Video 3.1: An official product video demonstrating the ID-COOLING AF-127 ARGB fans in operation and their lighting effects.
4. Instruccions de funcionament
The AF-127-K-TRIO fans offer dynamic control over both cooling performance and aesthetic lighting.
- PWM Functionality: These fans support Pulse Width Modulation (PWM), allowing for dynamic speed adjustment between 500 RPM and 2,000 RPM. This enables your motherboard or fan controller to automatically adjust fan speed based on system temperature, optimizing for either quiet operation or maximum airflow as needed.
- Control d'il·luminació ARGB: The Addressable RGB (ARGB) lighting can be controlled via compatible motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or a dedicated ARGB controller. This allows for synchronization with other ARGB components and customization of lighting effects.
Image 4.1: Key operational features of the fan.
5. Manteniment
Regular maintenance ensures optimal performance and longevity of your fans.
- Neteja de pols: Periodically clean the fan blades and frame to prevent dust buildup, which can impede airflow and increase noise. Use compressed air or a soft brush. Ensure the system is powered off before cleaning.
- Longevitat del rodament: The Fluid Dynamic Bearing (FDB) design provides quieter operation and a longer lifespan, requiring minimal user maintenance. Avoid disassembling the fan.
Image 5.1: Fluid Dynamic Bearing for enhanced durability and quiet operation.
6. Solució De Problemes
If you encounter issues with your fans, refer to the following common solutions:
- El ventilador no gira:
- Check if the fan's power cable is securely connected to the motherboard or controller.
- Ensure the fan header on the motherboard is enabled in the BIOS/UEFI settings.
- Test the fan on a different header or with a different power source if possible.
- La il·luminació ARGB no funciona:
- Verify the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 12V RGB).
- Check your motherboard's ARGB software or dedicated controller for lighting settings.
- Ensure all daisy-chained ARGB connections are secure.
- Soroll excessiu:
- Comproveu si hi ha obstruccions (cables, pols) que toquin les aspes del ventilador.
- Assegureu-vos que els cargols de muntatge estiguin ben apretats per evitar vibracions.
- Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM.
If problems persist, contact ID-COOLING customer support for further assistance.
7. Especificacions
| Característica | Especificació |
|---|---|
| Mida del ventilador | 120 mm |
| Velocitat del ventilador | 500-2000 RPM (PWM) |
| Màx. Flux d'aire | 78 CFM |
| Màx. Pressió de l'aire | 2.68 mm H2O |
| Nivell de soroll | 29.9 dB(A) Max. |
| Tipus de rodament | Coixinet dinàmic de fluids (FDB) |
| Tipus de connector | 4-Pin PWM (for fan speed), 3-Pin 5V ARGB (for lighting) |
| Tipus de connector d'alimentació | 2-Pin or 3-Pin (as per product data, typically 4-pin PWM for control) |
| Voltage | 12 Volts |
| Wattage | 4.32 watts |
| Mètode de refrigeració | Aire |
| Dispositius compatibles | Desktop (CPU air coolers, radiators, PC cases) |
| Material | Copper (likely referring to internal components, not frame) |
8. Garantia i Suport
ID-COOLING products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product packaging or visit the official ID-COOLING website. For technical support, troubleshooting assistance, or warranty claims, please contact ID-COOLING customer service through their official channels.
