Manual d'usuari del monitor per a nadons GHB ABM700

Introducció

Thank you for choosing the GHB ABM700 Baby Monitor. This device is designed to provide a secure and convenient way to monitor your baby, ensuring peace of mind. It features a 5-inch 720P HD IPS screen, VOX mode for energy saving, infrared night vision, two-way audio communication, and real-time temperature display. Please read this manual thoroughly before use to ensure proper operation and safety.

This image displays the GHB ABM700 Baby Monitor system. On the left is the white camera unit with a black lens and sensor area. On the right is the parent monitor unit, featuring a large 5-inch IPS screen displaying a smiling baby. The monitor unit also has control buttons on its right side, including navigation arrows and function buttons.

Informació de seguretat

• Always keep the camera and monitor units out of reach of children.
• Use only the original power adapters provided with the device.
• The camera requires continuous power connection to function.
• The camera's tilt is manually adjustable only; remote control is not possible.
• This device features audio detection only, not motion detection.
• Do not place the camera or cords within 3 feet (1 meter) of the crib or playpen.
• Eviteu col·locar el dispositiu a prop de fonts de calor o sota la llum solar directa.
• No exposeu el dispositiu a l'aigua ni a la humitat.

Contingut del paquet

• 1 x Unitat dels pares (monitor)
• 1 x unitat de nadó (càmera)
• 2 x Power Adapters (for Monitor and Camera)
• 1 x Manual d'usuari (aquest document)

Producte acabatview

Unitat de pares (monitor)

• 5-inch 720P HD IPS Display
• Control Buttons (Menu, Navigation, Talk, Return)
• Micròfon i altaveu
• Power/Charging Port
• Antena

Unitat per a nadons (càmera)

• Lent de la càmera HD
• LED infrarojos per a visió nocturna
• Sensor de temperatura
• Micròfon i altaveu
• Port d'alimentació
• Mounting Base (manual tilt adjustment)

Configuració

1. Càrrega de la unitat principal

Connect the smaller end of one power adapter to the Parent Unit's charging port and the larger end to a power outlet. Charge the unit fully before first use. The battery lasts approximately 10 hours in continuous light mode and 22 hours in VOX mode.

2. Powering the Baby Unit

Connect the smaller end of the second power adapter to the Baby Unit's power port and the larger end to a power outlet. The Baby Unit requires continuous power to operate.

3. Posicionament de les unitats

• Place the Baby Unit (camera) at least 3 feet (1 meter) away from your baby's crib or playpen.
• Ensure the camera has a clear, unobstructed view del teu nadó.
• Adjust the camera's angle manually to achieve the desired viewzona d'ing.
• Place the Parent Unit (monitor) in a location where you can easily see and hear your baby.
• For optimal signal, avoid placing units near other electronic devices that may cause interference.

4. Emparellament (preemparellat de fàbrica)

The Baby Unit and Parent Unit are pre-paired at the factory. If for any reason they lose connection, or if you wish to add an additional camera (supports up to 2 cameras), refer to the "Adding/Managing Cameras" section in Operating Instructions.

Instruccions de funcionament

1. Encendre/apagar

Press and hold the Power button on the Parent Unit to turn it on or off. The Baby Unit powers on automatically when connected to power.

2. VOX Mode (Voice Operated Exchange)

In VOX mode, the screen of the Parent Unit will turn off to save power and battery life. It will automatically turn on when the Baby Unit detects sound above a certain sensitivity level. This mode significantly extends battery life.

3. Visió nocturna

The Baby Unit is equipped with infrared LEDs that automatically activate in low-light conditions, providing clear black-and-white video of your baby even in complete darkness.

4. Two-Way Audio (Intercom)

Press and hold the "Talk" button on the Parent Unit to speak to your baby through the Baby Unit's speaker. Release the button to hear your baby.

5. Visualització de la temperatura

The Parent Unit displays the real-time temperature of the baby's room, detected by the sensor on the Baby Unit. This helps ensure a comfortable environment for your baby.

6. Zoom digital

Use the zoom function (typically via menu or dedicated button) to get a closer look at your baby on the Parent Unit screen.

7. Adding/Managing Cameras (Up to 2 Cameras)

The system supports connecting up to two cameras. To add an additional camera or re-pair:

1. Access the camera management menu on the Parent Unit.
2. Select "Add Camera" or "Pair Camera".
3. Follow the on-screen prompts to initiate pairing.
4. Press the pairing button on the Baby Unit (camera) within the specified time frame.
5. Once paired, you can switch between cameras using the Parent Unit's controls.

Manteniment

• Clean the units with a dry, soft cloth. Do not use cleaning agents or solvents.
• Ensure the camera lens is free of dust and smudges for clear image quality.
• Guardeu el dispositiu en un lloc fresc i sec quan no el feu servir durant períodes prolongats.
• Eviteu deixar caure les unitats o sotmetre-les a impactes forts.

Resolució de problemes

Especificacions

Garantia i Suport

For warranty information and technical support, please refer to the contact details provided on the product packaging or visit the official GHB weblloc web. Conserveu el rebut de compra com a comprovant de compra.