Manual d'usuari de la bicicleta reclinada ProForm Cycle Trainer 400 RI

Introducció

This manual provides essential information for the safe and effective use of your ProForm Cycle Trainer 400 RI Recumbent Bike. Please read all instructions carefully before assembly and operation. Retain this manual for future reference.

Figure 1: The ProForm Cycle Trainer 400 RI Recumbent Bike in use.

Muntatge i muntatge

Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the included hardware pack for specific fasteners. Tools for assembly are typically provided.

Step 1: Attaching the Front Stabilizer

1. Locate the front stabilizer bar. Ensure the transport wheels face forward.
2. Align the stabilizer with the mounting points on the main frame.
3. Secure with the provided bolts and washers using the Allen wrench.

Step 2: Attaching the Rear Stabilizer

1. Locate the rear stabilizer bar. The handle for lifting should face backward.
2. Align the stabilizer with the mounting points on the main frame.
3. Secure with the provided bolts and washers.

Step 3: Assembling the Seat and Backrest

1. Attach the seat cushion to its bracket using the designated bolts.
2. Mount the seat assembly onto the main frame, ensuring the square-sided bolts are correctly oriented for stability. Tighten all bolts securely.
3. Slide the backrest into its position on the seat frame. Align the holes and secure with the four provided bolts.
4. Connect the seat adjustment wire from the seat to the main unit.

Step 4: Installing the Console Post and Console

1. Connect the console wires from the main unit to the console post. Ensure a secure connection.
2. Carefully slide the console post into the main unit, ensuring wires are not pinched. Secure with bolts.
3. Attach the console to the console post. Remove any pre-installed screws from the back of the console first, then use them to secure the console to the post.

Step 5: Attaching Handlebars and Pedals

1. Mount the handlebars to the console post, securing them with the provided bolts.
2. Attach the pedals. Note that the left pedal typically tightens by turning counter-clockwise (lefty-tighty) to prevent loosening during use. The right pedal tightens clockwise. Secure the foot straps.

Figura 2: lateral view of the assembled recumbent bike.

Instruccions de funcionament

Ajust del seient

To adjust the seat position, pull the lever located beneath the seat. Slide the seat forward or backward to your desired position, then release the lever to lock it in place. Ensure the seat is securely locked before use.

Using the LCD Display Console

The integrated LCD display provides real-time workout data. Insert two AAA batteries (included) into the console's battery compartment. The console typically displays:

• Hora: Durada del teu entrenament.
• Velocitat: Velocitat ciclista actual.
• Distància: Distància total recorreguda durant l'entrenament.
• Calories: Calories cremades estimades.
• Pols: Your heart rate, measured by gripping the hand sensors on the handlebars.
• Escaneig: Passa automàticament per totes les funcions de la pantalla.

Use the 'Mode' button to cycle through display options and 'Set'/'Reset' buttons for specific adjustments or to clear data.

Ajust dels nivells de resistència

The Cycle Trainer 400 RI features 16 digital resistance levels. Use the resistance control knob, usually located near the console, to increase or decrease the workout intensity. Turn clockwise for higher resistance, counter-clockwise for lower resistance.

iFIT Bluetooth Smart Enabled (Subscription Required)

This bike is compatible with iFIT via Bluetooth. Connect your own tablet or smartphone (not included) to access interactive training sessions. iFIT trainers can automatically adjust your bike's resistance for an optimized workout experience. A 30-day iFIT membership is typically included with purchase.

Manteniment

Regular maintenance ensures the longevity and safe operation of your recumbent bike.

• Neteja: Wipe down the bike after each use with a damp drap per eliminar la suor i la pols. Eviteu productes de neteja o dissolvents abrasius.
• Inspecció: Comproveu periòdicament tots els cargols, femelles i peces mòbils per assegurar-vos que estiguin ben ajustats i que no estiguin desgastats. Estrenyeu qualsevol element de fixació solt.
• Lubricació: No regular lubrication is typically required for the internal magnetic resistance system. Consult the manufacturer if unusual noises occur.
• Emmagatzematge: Store the bike in a dry, level area away from direct sunlight and extreme temperatures.

Resolució de problemes

If you encounter issues with your recumbent bike, refer to the table below for common problems and solutions.

Especificacions

Figure 3: Product dimensions for the recumbent bike.

Garantia i Suport

For warranty information, product support, or to order replacement parts, please refer to the warranty card included with your purchase or visit the official ProForm weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.