1. Introducció
The OLIGHT Perun 2 is a high-performance, multi-functional right-angle LED headlamp designed for various activities including night camping, hiking, hunting, and general outdoor use. It features a powerful 2500-lumen output, a customized rechargeable battery, and a smart proximity sensor for enhanced safety and efficiency. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Perun 2 headlamp.
2. Contingut del paquet
- Perun 2 Headlamp (Battery and Pocket Clip Included) x 1
- Head Band x 1
- Cable de càrrega magnètica MCC3 x 1
- Cordó x 1
- Manual d'usuari x 1
3. Configuració
3.1 Instal·lació de la bateria
The Perun 2 comes with a customized rechargeable lithium-ion battery pre-installed. Ensure the battery is securely seated before first use. If replacing the battery, ensure correct polarity.
3.2 Càrrega del dispositiu
To charge your Perun 2, connect the MCC3 Magnetic Charging Cable to the magnetic tailcap of the headlamp and a USB power source. The charging indicator on the cable will show red when charging and turn green when fully charged. The MCC3 cable offers a charging current up to 2A, significantly speeding up the charging process.
Image: The Perun 2 headlamp connected to its magnetic charging cable, illustrating the charging status indicator. Red indicates charging, while green indicates a full charge.
3.3 Attaching the Headband
The Perun 2 can be used as a headlamp by attaching it to the included headband. Slide the headlamp into the silicone mount on the headband. Adjust the straps for a comfortable and secure fit on your head.
Image: The OLIGHT Perun 2 LED Headlamp securely mounted on its adjustable headband, ready for hands-free use.
4. Funcionament
4.1 Funcions bàsiques
- Activar/Desactivar: Press the side switch once to turn the light on or off.
- Canvia el nivell de brillantor: When the light is on, press and hold the side switch to cycle through Low, Medium, and High modes. Release the switch to select the desired mode.
- Mode clar de lluna: When the light is off, press and hold the side switch for approximately one second to activate Moonlight mode.
- Mode turbo: Quickly double-press the side switch to activate Turbo mode. Double-press again to return to the previous mode.
- Mode estroboscòpic: Quickly triple-press the side switch to activate Strobe mode.
- Bloqueig/Desbloqueig: When the light is off, press and hold the side switch for over two seconds to enter lockout mode. To unlock, press and hold the switch for over one second until the light briefly turns on.
4.2 Brightness Modes and Runtime
The Perun 2 offers multiple brightness levels to suit various needs. The table below details the output, runtime, and throw distance for each mode:
Image: An infographic table illustrating the performance specifications for each of the five output modes of the Perun 2 headlamp.
| Especificació | Mode 1 (Turbo) | Mode 2 (High) | Mode 3 (Medium) | Mode 4 (Low) | Mode 5 (Moonlight) |
|---|---|---|---|---|---|
| Llums | 2500 → 800 | 500 | 120 | 30 | 5 |
| Temps d'execució | 2 + 175 minutes | 270 minuts | 18 hores | 66 hores | 12.5 dies |
| Distància de llançament | 166 metres | 74 metres | 36 metres | 18 metres | N/A |
| Candela | 6889 cd | 1369 cd | 324 cd | 81 cd | N/A |
4.3 Proximity Protection Sensor
The Perun 2 is equipped with a built-in proximity sensor that automatically reduces brightness when it detects an obstruction nearby. This feature helps prevent accidental overheating and protects against glare. If the obstruction remains for one minute, the light will turn off.
Image: The Perun 2 headlamp's proximity sensor in action, showing the light dimming when brought close to a surface, such as a map.
4.4 Right-Angle Illumination and Adjustability
The Perun 2 features a right-angle design, allowing for versatile use as both a headlamp and a handheld flashlight. When used as a headlamp, its illumination angle is adjustable up to 180 degrees, providing a wide range for all-around visibility.
Image: A hand holding the Perun 2, demonstrating its right-angle design for focused illumination.
Image: A diagram illustrating the 180-degree adjustable illumination angle of the Perun 2 when worn as a headlamp.
4.5 Hands-Free Convenience
Beyond its use as a headlamp, the Perun 2 offers multiple hands-free options thanks to its magnetic base and reliable pocket clip. It can be attached to metal surfaces, clipped to clothing or gear, or worn on the headband for versatile lighting solutions.
Imatge: Examples of the Perun 2's hands-free capabilities, including use as a headlamp, clipped to a backpack strap, and magnetically attached to a metal surface.
5. Manteniment
5.1 Neteja
Regularly clean the lens and body of the headlamp amb un suau, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or internal components. Keep the magnetic charging port free of debris to ensure proper charging.
5.2 Resistència a l'aigua
The Perun 2 is rated IPX8 waterproof, meaning it is protected against continuous immersion in water beyond 1 meter. While designed to be highly water-resistant, it is recommended to dry the headlamp thoroughly after exposure to water, especially the charging port, to prevent corrosion.
Image: The Perun 2 headlamp partially submerged in water, demonstrating its IPX8 water resistance.
5.3 Cura de la bateria
To prolong battery life, charge the headlamp regularly and avoid fully depleting the battery for extended periods. Store the headlamp in a cool, dry place when not in use. If the battery level is below 10%, the light will vibrate once every 30 seconds (except in Moonlight mode) to alert you to recharge.
6. Solució De Problemes
- La llum no s'encén: Ensure the battery is charged and properly installed. Check if the device is in lockout mode (refer to Section 4.1).
- La llum s'atenua inesperadament: The proximity sensor may be activated. Ensure there are no obstructions near the lens. If the light remains dim, the battery level might be low.
- Problemes de càrrega: Ensure the MCC3 cable is securely connected to both the headlamp and the USB power source. Clean the magnetic charging contacts on both the cable and the headlamp.
- Capamp vibrates: This indicates a low battery level (below 10%). Recharge the headlamp prompte.
7. Especificacions
| Característica | Detall |
|---|---|
| Model | PERUN2-DB-300000 |
| Sortida màxima | 2500 lúmens |
| Font d'alimentació | Customized Rechargeable Lithium-Ion Battery |
| Tipus de font de llum | LED |
| Material | Alumini |
| Resistència a l'aigua | IPX8 impermeable |
| Característiques especials | Adjustable Light Modes, Rechargeable, Proximity Sensor, Magnetic Base, Right-Angle Design |
| Dimensions del producte | 4.41 "P x 1.02" W x 0.91" H |
| Pes de l'article | 15.2 unces |
| Voltage | 3.7 volts (CC) |
| Components inclosos | Charging Cable, Head Band, Lanyard, Perun 2 (Battery and Pocket Clip Included), User Manual |
8. Garantia i Suport
8.1 Informació de la garantia
The OLIGHT Perun 2 LED Headlamp comes with a lifetime warranty for products purchased after January 1st, 2023. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
8.2 Atenció al client
For further assistance, technical support, or warranty inquiries, please visit the official OLIGHT website or contact their customer service department. Refer to the packaging or official weblloc web per obtenir la informació de contacte més actualitzada.
