Homall Electric Standing Desk 120x60 cm User Manual

1. Informació important de seguretat

Si us plau, llegiu atentament totes les instruccions abans del muntatge i l'ús. Conserveu aquest manual per a futures consultes.

• Do not exceed the maximum load capacity of 80 kg (176 lbs) to ensure stability and safety of the desk.
• Assegureu-vos que tots els cargols i perns estiguin ben ajustats abans d'utilitzar-lo.
• Mantingueu els nens i les mascotes allunyats de l'escriptori durant el funcionament.
• Eviteu col·locar líquids directament sobre el tauler de control o a prop de components elèctrics.
• If any unusual noise or movement occurs, immediately stop operation and consult the troubleshooting section.

2. Producte acabatview

The Homall Electric Standing Desk is designed to provide a healthy and ergonomic workspace, allowing seamless transitions between sitting and standing positions. It features a robust steel frame, a spacious wooden tabletop, and an intelligent control system with memory presets and an anti-collision function.

Image: The Homall Electric Standing Desk in beige, showcasing its clean design and control panel.

Característiques principals:

• Ajust elèctric d'alçada: Smooth and quiet motor for effortless height changes.
• Preajustos de memòria: Three programmable height settings for quick transitions.
• Sistema anticol·lisió: Automatically stops and reverses if an obstruction is detected during movement.
• Construcció sòlida: All-steel frame supports up to 80 kg (176 lbs).
• Safata de gestió de cables: Integrated tray to keep your workspace tidy.
• Port de càrrega USB: Convenient port on the control panel for charging devices.

3. Instruccions de muntatge

Follow these steps for proper assembly of your Homall Electric Standing Desk. It is recommended to have two people for assembly. Refer to the video below for a visual guide.

Guia de vídeo de muntatge:

Muntatge pas a pas:

Refer to the included hardware and parts list. The tabletop consists of four parts that are joined during assembly.

1. Step 1: Attach Right Table Leg and Crossbar

   Secure the right table leg (Part 1) to the right crossbar (Part 9) using the provided M6x11mm screws (Part A). Refer to the assembly video for visual guidance.
2. Step 2: Attach Side Plate

   Attach the side plate (Part 7) to the assembled right leg and crossbar using M8x12mm screws (Part C). Refer to the assembly video for visual guidance.

3. Step 3: Attach Left Table Leg and Crossbar

   Repeat Step 1 for the left table leg (Part 2) and left crossbar (Part 8) using M6x11mm screws (Part A). Refer to the assembly video for visual guidance.

4. Step 4: Attach Second Side Plate

   Attach the second side plate (Part 7) to the assembled left leg and crossbar using M8x12mm screws (Part C). Refer to the assembly video for visual guidance.
5. Step 5: Connect Crossbars

   Use the connector (Part 10) to join the right and left crossbars, securing with M6x11mm screws (Part A). Refer to the assembly video for visual guidance.

6. Step 6: Join Tabletop Sections

   Use wooden dowels (Part F) to join tabletop sections (Parts 11, 12, 13, 14). Ensure they align correctly. Refer to the assembly video for visual guidance.

7. Step 7: Secure Tabletop Connectors

   Attach table connectors (Parts J and M) to the underside of the tabletop using M5x15mm screws (Part E) to reinforce the joints. Refer to the assembly video for visual guidance.
8. Step 8: Attach Tabletop to Frame

   Carefully place the assembled tabletop onto the desk frame. Align the pre-drilled holes and secure the tabletop to the frame using M5x15mm screws (Part E). Refer to the assembly video for visual guidance.

9. Pas 9: instal·leu la barra de transmissió

   Insert the transmission rod (Part 4) into the designated slots, connecting the two leg mechanisms. Ensure it is fully engaged. Refer to the assembly video for visual guidance.

10. Step 10: Attach Cable Management Tray

    Mount the cable management tray (Part 15) to the underside of the desk using M5x12mm screws (Part D). This helps organize power strips and cables. Refer to the assembly video for visual guidance.
11. Step 11: Install Leg Bases

    Attach the leg bases (Part 3) to the bottom of each table leg using M6x35mm screws (Part B). Ensure the adjustable feet are facing down. Refer to the assembly video for visual guidance.

12. Step 12: Mount Control Panel

    Attach the control panel (Part 5) to the underside of the desk, typically on the front edge, using M5x15mm screws (Part E). Connect the motor cable to the control panel. Refer to the assembly video for visual guidance.

13. Step 13: Install Headphone Hook

    Attach the headphone hook (Part K) to the desired location on the underside of the desk using M5x15mm screws (Part E). Refer to the assembly video for visual guidance.

Once all components are assembled, plug the desk into a power outlet. Your Homall Electric Standing Desk is now ready for use.

4. Instruccions de funcionament

The control panel allows for easy adjustment of the desk height and programming of memory presets.

Image: Close-up of the desk's control panel with buttons for height adjustment, memory presets, and a digital display.

Funcions del tauler de control:

• Fletxes amunt/avall (▲ / ▼): Premeu i manteniu premut per ajustar l'alçada de l'escriptori manualment. Deixeu anar per aturar-lo a l'alçada desitjada.
• Preajustos de memòria (1, 2, 3):
  1. Ajusteu l'escriptori a l'alçada desitjada amb les fletxes amunt/avall.
  2. Press the 'M' button (or similar memory button, often represented by a clock icon or 'S'). The display will show 'S-'.
  3. Within 3 seconds, press the desired preset button (1, 2, or 3). The display will show 'S-1', 'S-2', or 'S-3' to confirm the setting is saved.
  4. To recall a saved height, simply press the corresponding preset button (1, 2, or 3). The desk will automatically move to the saved position.
• Sistema anticol·lisió: The desk is equipped with an anti-collision feature. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse slightly to prevent damage.
• Port de càrrega USB: A USB port is integrated into the control panel for convenient charging of small electronic devices.

Using the Sit-Stand Function:

Regularly alternating between sitting and standing positions can promote better posture and reduce discomfort during long work sessions.

Image: A user transitioning between sitting and standing positions at the Homall Electric Standing Desk, highlighting its ergonomic benefits.

Use the memory presets to quickly switch between your preferred sitting and standing heights. For example, program preset 1 for your sitting height and preset 2 for your standing height.

Producte acabatview Vídeo:

5. Manteniment

Proper maintenance ensures the longevity and optimal performance of your electric standing desk.

• Neteja: Netegeu la superfície i el marc de l'escriptori amb un drap suau iamp drap. Eviteu netejadors abrasius o productes químics agressius que puguin danyar l'acabat.
• Gestió de cables: Periodically check and organize cables in the management tray to prevent tangling or damage.
• Estancament del cargol: Every few months, check all screws and bolts to ensure they remain tight. Retighten if necessary.
• Cura del motor: The electric motor is designed for durability. Avoid overloading the desk beyond its maximum capacity to prevent strain on the motor.

6. Solució De Problemes

If you encounter any issues with your Homall Electric Standing Desk, refer to the following common troubleshooting steps:

If the problem persists after trying these solutions, please contact Homall customer support.

7. Especificacions

8. Garantia i Suport

Homall offers comprehensive support for its products.

• Política de devolució: Enjoy a free and unconditional 30-day return service.
• Garantia: A 5-year replacement or repair service is provided for this product.
• For any questions, concerns, or warranty claims, please contact Homall customer support through your purchase platform or the official Homall weblloc.