Manual d'usuari del netejador robòtic de piscines sense fil INSE Y10

1. Introducció

Thank you for choosing the INSE Y10 Cordless Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before first use and retain it for future reference.

2. Instruccions de seguretat

Observeu sempre les següents precaucions de seguretat per reduir el risc de lesions o danys:

• Llegiu totes les instruccions abans d’utilitzar l’aparell.
• Do not operate the cleaner if the power cord or charger is damaged.
• Assegureu-vos que el port de càrrega estigui sec abans de carregar.
• Mantingueu els nens i les mascotes allunyats de la zona de la piscina quan el netejador estigui en funcionament.
• Only use the original charger provided by INSE.
• Do not use the cleaner for anything other than its intended purpose of cleaning pools.
• Avoid operating the cleaner in pools with slopes or wrinkles, as it is designed for flat surfaces.

3. Producte acabatview

The INSE Y10 is a lightweight, cordless robotic pool cleaner designed for efficient cleaning of flat above-ground and in-ground pools up to 1100 sq.ft.

Figure 3.1: The INSE Y10 Cordless Robotic Pool Cleaner, showcasing its compact design and readiness for pool cleaning.

Components clau:

• Main Unit (with integrated motor and battery)
• Safata de filtre
• Cable de càrrega
• Floating Bracelet (for easy retrieval)
• Independent Brush
• Suction Inlets (x2)

4. Configuració i càrrega

4.1 Càrrega inicial

Before first use, fully charge the INSE Y10. The cleaner features a 5200mAh rechargeable battery, providing up to 90 minutes of runtime on a full charge.

1. Ensure the charging port on the cleaner is clean and dry.
2. Connect the charging cable to the cleaner's charging port.
3. Connecteu l'altre extrem del cable de càrrega a una presa de corrent adequada.
4. The indicator light will show charging status (refer to LED indicator section in troubleshooting for details).
5. Once fully charged, disconnect the cleaner from the power source.

4.2 Comprovació prèvia a l'operació

Before placing the cleaner in the pool, ensure the filter tray is properly installed and clean.

5. Funcionament

5.1 Inici del netejador

The INSE Y10 features a simple one-press activation for ease of use.

Figure 5.1: Activating the cleaner with a single press of the power button.

1. Assegureu-vos que el netejador estigui completament carregat.
2. Long press the power switch on the top of the cleaner to activate it.
3. Gently submerge the cleaner into your pool. It will automatically begin its cleaning cycle.

5.2 Rendiment de neteja

The INSE Y10 is equipped with powerful motors and an efficient suction system, featuring two suction inlets and a long independent brush. It follows a preprogrammed zigzag path to cover the largest area and efficiently capture dirt, leaves, and debris.

Figure 5.2: The cleaner in action, demonstrating its powerful suction and fast cleaning speed of 36 feet per minute.

Figure 5.3: The efficient suction system with two inlets, designed to maximize debris collection.

5.3 Funció d'autoaparcament

When the battery is low or the cleaning task is completed, the INSE Y10 will automatically park itself alongside the edge of your pool, making retrieval easy.

Figure 5.4: The cleaner utilizing its self-parking technology to return to the pool edge.

5.4 Recuperació del netejador

Thanks to its lightweight design (only 6.6 pounds) and the included floating bracelet, retrieving the cleaner is simple and requires minimal effort.

Figure 5.5: The lightweight design of the INSE Y10 makes it easy to retrieve from the pool.

1. Once the cleaner has parked, use the floating bracelet to gently pull it towards you.
2. Lift the cleaner out of the water using its handle.
3. Allow excess water to drain before proceeding to maintenance.

6. Manteniment

6.1 Neteja del filtre

Regular cleaning of the filter tray is crucial for maintaining optimal cleaning performance.

Figure 6.1: The filter tray is easily detachable and can be cleaned with a hose.

1. Després de cada cicle de neteja, traieu el netejador de la piscina.
2. Detach the filter tray from the main unit.
3. Rinse the filter tray thoroughly with a garden hose to remove all collected debris.
4. Ensure the filter tray is completely dry before reattaching it to the cleaner or storing the unit.

6.2 Emmagatzematge

When not in use, store the INSE Y10 in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cleaner is clean and dry before storage.

7. Solució De Problemes

If you encounter issues with your INSE Y10, please refer to the following common problems and solutions:

8. Especificacions

9. Garantia i Suport

INSE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official INSE website. Please have your model number (Y10) and purchase details ready when contacting support.