Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire

1. Producte acabatview

The Philips DayBrite CFI Linear SDS Selectable Strip is a versatile 2-foot LED luminaire designed for various indoor lighting applications. This fixture offers field-selectable color temperatures (3500K, 4000K, 5000K) and lumen outputs (1200, 1800, 2400 lumens), providing flexibility to meet specific lighting requirements. It features 0-10V dimming capability for precise light level control.

Figure 1: Philips DayBrite CFI Linear SDS Selectable LED Strip Luminaire. This image shows the full length of the white linear LED strip light, featuring a frosted diffuser for even light distribution and a sleek, minimalist design suitable for various indoor installations.

2. Informació de seguretat

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
• Installation must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• Do not install in wet locations or near flammable materials.
• Assegureu-vos el subministrament voltage is compatible with the luminaire's requirements (120-277V AC).
• No modifiqueu la lluminària de cap manera.
• Handle with care to avoid damage to LED components.

3. Contingut del paquet

Verifiqueu que tots els components estiguin presents i no estiguin danyats en obrir l'envàs:

• 1 x Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire
• 1 x Guia d'instal·lació (aquest document)
• Mounting Hardware (e.g., screws, anchors - may vary by package)

4. Configuració i instal·lació

This luminaire is designed for surface mounting. Professional installation is recommended.

1. Prepareu l'àrea d'instal·lació: Ensure the mounting surface is structurally sound and can support the weight of the fixture. Turn off power at the circuit breaker before beginning installation.
2. Marqueu els punts de muntatge: Use the luminaire as a template to mark the desired mounting locations on the ceiling or wall. Ensure marks are level and spaced correctly for secure attachment.
3. Instal·leu el maquinari de muntatge: Drill pilot holes at the marked locations. Insert appropriate anchors if mounting into drywall or plaster. Secure the mounting brackets (if separate) or the luminaire directly using screws.
4. Connexions de cablejat:
   • Connect the AC power supply wires (Line, Neutral, Ground) from the junction box to the corresponding wires on the luminaire. Follow local electrical codes for proper wiring.
   • For 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the luminaire to the corresponding wires on your 0-10V dimming control system. Ensure polarity is correct.
   • Secure all wire connections with appropriate wire nuts or connectors.
5. Fixeu la lluminària: Once wiring is complete and connections are secure, attach the luminaire firmly to the mounting surface. Ensure no wires are pinched.
6. Restaura l'alimentació: Turn on power at the circuit breaker. Test the luminaire for proper operation and dimming functionality.

5. Instruccions de funcionament

This luminaire features field-selectable color temperature and lumen output settings.

• Selecció de temperatura de color: Locate the CCT (Correlated Color Temperature) selector switch on the luminaire. This switch allows you to choose between 3500K (Warm White), 4000K (Cool White), and 5000K (Daylight) settings. Ensure power is off before adjusting this switch.
• Lumen Output Selection: Locate the Lumen selector switch on the luminaire. This switch allows you to choose between 1200, 1800, and 2400 lumens. Ensure power is off before adjusting this switch.
• Atenuació 0-10V: Once installed and wired to a compatible 0-10V dimmer, the light output can be adjusted smoothly from 100% down to 10% (or lower, depending on dimmer specifications) using the external dimming control.

6. Manteniment

The Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire requires minimal maintenance.

• Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau, sec o lleugerament sec.amp cloth to wipe the exterior surface of the luminaire. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or optical components.
• LED: The LEDs are integrated and do not require replacement.

7. Solució De Problemes

If you experience issues with your luminaire, refer to the following common problems and solutions:

Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.

8. Especificacions

9. Informació de la garantia

This Philips DayBrite product is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Signify weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia. Conserveu el comprovant de compra per a reclamacions de garantia.

10. Atenció al client

For technical assistance, product inquiries, or warranty claims, please contact Signify customer support:

• Weblloc: Visit the official Signify or Philips Lighting weblloc web amb recursos de suport, preguntes freqüents i informació de contacte.
• Telèfon: Refer to the contact details provided on the product packaging or the manufacturer's weblloc.

When contacting support, please have your product model number (SDS21224L8CST-UNV-DIM) and proof of purchase readily available.