1. Introducció
The XPG Core Reactor II Power Supply is a high-performance component designed to provide stable and efficient power to your computer system. With 750W of power and 80 Plus Gold certification, it ensures high energy efficiency. Its Full Modular design simplifies installation and cable management. The Active PFC (Power Factor Correction) feature further enhances overall system performance by delivering consistent and reliable power, crucial for demanding PC operations.
2. Informació de seguretat
Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product or other components.
- Seguretat elèctrica: Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply. Ensure your hands are dry when handling electrical components.
- Connexió a terra adequada: Ensure your computer system and the power outlet are properly grounded to prevent electrical shock.
- Ventilació: No bloquegeu les obertures de ventilació de la font d'alimentació. Assegureu-vos que hi hagi un flux d'aire adequat al voltant de la unitat per evitar el sobreescalfament.
- Medi ambient: Operate the power supply in a dry, well-ventilated environment. Avoid exposure to moisture, dust, and extreme temperatures.
- Manipulació: Handle the power supply with care. Avoid dropping or subjecting it to strong impacts.
- Servei autoritzat: Do not attempt to open or repair the power supply yourself. Refer all servicing to qualified service personnel. Opening the unit will void the warranty.
3. Contingut del paquet
Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or XPG support.
- XPG Core Reactor II Power Supply Unit
- Modular Cable Set (including ATX 24-pin, EPS/CPU 4+4-pin, PCIe 6+2-pin, SATA, and Peripheral cables)
- Cable d'alimentació CA
- Cargols de muntatge
- Manual d'usuari (aquest document)
Image: The XPG Core Reactor II Power Supply unit, showcasing its black finish, fan grille, and modular cable ports. The image also implies the presence of various modular cables for system connection.
4. Configuració i instal·lació
Follow these steps to properly install your XPG Core Reactor II Power Supply into your computer system.
- Prepareu el vostre sistema: Assegureu-vos que l'ordinador estigui completament apagat i desendollat de la presa de corrent. Obriu la carcassa de l'ordinador.
- Traieu la font d'alimentació antiga (si escau): Desconnecta tots els cables de la font d'alimentació antiga i retira els cargols de muntatge. Fes-la lliscar amb cura fora de la carcassa.
- Mount the New Power Supply: Position the XPG Core Reactor II Power Supply in the designated PSU bay of your computer case. Ensure the fan is oriented correctly (typically facing downwards or upwards depending on case design and ventilation). Secure it with the provided mounting screws.
- Connecteu els cables modulars: Due to its full modular design, you only need to connect the cables required for your components.
- Alimentació de la placa base: Connect the 24-pin ATX cable to the corresponding port on the power supply and the motherboard.
- Potència de la CPU: Connect the 4+4-pin EPS/CPU cable to the power supply and the CPU power connector(s) on your motherboard.
- Graphics Card Power: Connect the 6+2-pin PCIe cables to the power supply and your graphics card(s). Use separate cables for each connector on high-power GPUs if possible.
- Dispositius SATA: Connecteu els cables d'alimentació SATA als vostres SSD, HDD i unitats òptiques.
- Dispositius perifèrics: Connect peripheral (Molex) cables for case fans or other accessories as needed.
- Gestió de cables: Col·loca els cables amb cura per millorar el flux d'aire i l'estètica dins de la carcassa.
- Tanqueu la caixa i connecteu l'alimentació: Un cop totes les connexions estiguin ben connectades, tanqueu la carcassa de l'ordinador. Connecteu el cable d'alimentació de CA a la font d'alimentació i després a una presa de corrent.
5. Instruccions de funcionament
Operating the XPG Core Reactor II Power Supply is straightforward once installed.
- Encès: Ensure the power switch on the back of the power supply (next to the AC inlet) is in the 'I' (On) position. Then, power on your computer using the case's power button.
- Eficiència: The 80 Plus Gold certification indicates high energy efficiency, meaning less wasted heat and lower electricity consumption compared to less efficient power supplies.
- PFC actiu: The Active Power Factor Correction feature automatically adjusts the input current waveform to improve the power factor, leading to more stable and cleaner power delivery to your components.
- Apagar: To shut down your system, use the operating system's shutdown function. For complete power disconnection, switch the power supply's switch to the 'O' (Off) position and unplug the AC power cord.
6. Manteniment
Un manteniment regular ajuda a garantir la longevitat i el rendiment òptim de la vostra font d'alimentació.
- Eliminació de pols: Periodically (e.g., every 3-6 months), power off and unplug your computer. Use compressed air to gently blow dust out of the power supply's fan grille and ventilation openings. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- Inspecció del cable: Occasionally check all connected modular cables to ensure they are securely seated and free from damage.
- Control ambiental: Ensure the operating environment remains clean, dry, and within recommended temperature ranges.
7. Solució De Problemes
If you encounter issues with your XPG Core Reactor II Power Supply, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| El sistema no s'encén. | Power cord not connected, PSU switch off, loose internal cables, faulty component. |
|
| El sistema s'encén però s'apaga immediatament. | Overload, overheating, short circuit, faulty component. |
|
| Soroll inusual de la font d'alimentació. | Fan obstruction, faulty fan bearing. |
|
If the problem persists after trying these steps, please contact XPG customer support for further assistance.
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | XPG |
| Nom del model | 75261186 |
| Potència de sortidatage | 750 watts |
| Certificació d'eficiència | 80 més d'or |
| Factor de forma | ATX |
| Modularitat | Completament Modular |
| Tipus PFC | PFC actiu |
| Mètode de refrigeració | Aire |
| Tipus de connector | ATX (24 Pin, EPS, PCIe, SATA, Peripheral) |
| Pes de l'article | 7.35 lliures (aprox. 3.33 kg) |
| Dimensions del paquet | 13.39 x 8.43 x 6.38 polzades (aprox. 34 x 21.4 x 16.2 cm) |
| Color | Negre |
| Volum d'entrada màximtage | 120 volts (CA) |
9. Garantia i Suport
For warranty information, technical support, or service inquiries regarding your XPG Core Reactor II Power Supply, please visit the official XPG weblloc web o contacteu directament amb el seu servei d'atenció al client.
You can also visit the official XPG Store on Amazon for product information and support resources:
