Unitank 2.0 Instruction Manual

1. Introducció

The Ss Brewtech Unitank 2.0 represents an advancement in homebrewing technology, designed for efficient fermentation and conditioning of beverages. This unit features a robust 1.5mm thick 304 Stainless Steel body and an integrated laser-welded jacketed cooling solution, providing enhanced temperature control and crashing capabilities. This manual provides essential information for the safe and effective setup, operation, and maintenance of your Unitank 2.0.

2. Informació de seguretat

Please read all safety instructions carefully before operating the Unitank 2.0. Failure to do so may result in injury or damage to the equipment.

• Always ensure all connections are secure and leak-free before pressurizing the unit.
• Do not exceed the maximum recommended pressure for the vessel. Refer to the pressure relief valve (PRV) rating.
• Use appropriate personal protective equipment (PPE) when handling hot liquids or cleaning chemicals.
• Ensure the Unitank is placed on a stable, level surface capable of supporting its full weight when filled.
• Mantenir fora de l'abast dels nens i mascotes.
• Disconnect any cooling lines before moving the unit.

3. Desembalatge i inspecció

Upon receiving your Unitank 2.0, carefully unpack all components and inspect for any shipping damage. Retain all packaging materials until you have confirmed the unit is in good working order.

1. Remove the Unitank and all accessories from the packaging.
2. Check for dents, scratches, or any other visible damage to the stainless steel body and components.
3. Verify that all listed components are present. If any items are missing or damaged, contact Ss Brewtech customer support immediately.

4. Configuració

Proper setup is crucial for optimal performance and longevity of your Unitank 2.0.

4.1 Identificació de components

Figura 4.1: The Ss Brewtech Unitank 2.0, showcasing its main body, conical bottom, leg assembly, and various ports including the pressure gauge, blow-off arm, and butterfly valves. The black main body contrasts with the polished stainless steel components.

4.2 Passos de muntatge

1. Col·loca les cames: Securely fasten the stainless steel leg assembly to the main body of the Unitank using the provided hardware. Ensure all bolts are tightened evenly.
2. Instal·leu les rodes/peus: If applicable, attach the casters or adjustable feet to the bottom of the leg assembly. Adjust feet to ensure the tank is level.
3. Install Valves and Ports: Attach all butterfly valves, the blow-off arm, pressure gauge, and any other included ports (e.g., thermowell, sampling valve) to their respective tri-clamp fittings. Ensure all tri-clamps are properly seated and secured with gaskets.
4. Connect Cooling Lines: Connect your glycol chiller or cooling system to the jacketed cooling ports on the Unitank. Ensure connections are tight to prevent leaks.
5. Neteja inicial: Before first use, thoroughly clean and sanitize the interior of the Unitank and all components that will come into contact with your product. Refer to Section 6 for detailed cleaning instructions.

5. Instruccions de funcionament

This section outlines the general procedures for operating your Unitank 2.0 for fermentation and conditioning.

5.1 Filling the Unitank

• Ensure the Unitank is clean and sanitized.
• Close all butterfly valves except for the main inlet/outlet valve (if used for filling).
• Carefully transfer your wort or liquid into the Unitank. Avoid splashing to minimize oxygen pickup.
• Once filled, close the inlet valve and attach the blow-off tube or airlock to the appropriate port.

5.2 Temperature Control (Jacketed Cooling)

The Unitank 2.0 features an advanced jacketed cooling system for precise temperature management.

1. Connect your glycol chiller or cooling pump to the cooling jacket ports.
2. Set your desired fermentation temperature on your cooling controller. The Unitank's design allows for efficient heat exchange, enabling stable temperature maintenance and rapid crashing.
3. Monitor the internal temperature using a thermowell and probe (not included, but compatible).

5.3 Fermentation and Conditioning

• Allow fermentation to proceed, monitoring pressure via the integrated pressure gauge and releasing excess pressure as needed through the PRV or blow-off arm.
• For conditioning or cold crashing, activate the cooling system to bring the temperature down to your desired level. The increased cooling surface area of the Unitank 2.0 facilitates faster crashing.
• Yeast can be harvested from the conical bottom via the dump valve.

6. Manteniment i Neteja

Regular cleaning and maintenance are essential for hygiene and the longevity of your Unitank 2.0.

6.1 Procediments de neteja

1. Esbandida: Immediately after emptying the Unitank, rinse thoroughly with warm water to remove gross fermentation debris.
2. Neteja: Use a brewery-specific cleaner (e.g., PBW or similar alkaline cleaner) according to the manufacturer's instructions. Fill the tank with the cleaning solution and allow it to soak, or use a CIP (Clean-In-Place) spray ball if equipped. Scrub any stubborn areas with a soft brush.
3. Esbandir de nou: Esbandiu bé amb aigua neta per eliminar tots els residus de la solució de neteja.
4. Desmuntar: Periodically disassemble all valves, gaskets, and fittings for thorough cleaning and inspection.

6.2 Sanitització

Before each use, the Unitank must be properly sanitized to prevent contamination.

• Use a no-rinse sanitizer (e.g., Star San) according to the manufacturer's dilution instructions.
• Fill the Unitank with the sanitizing solution or spray all internal surfaces thoroughly. Ensure all ports, valves, and gaskets are exposed to the sanitizer.
• Allow the recommended contact time before draining. Do not rinse after sanitizing if using a no-rinse sanitizer.

7. Solució De Problemes

8. Especificacions

• Model: Unitank 2.0
• Material: Acer inoxidable 304
• Gruix de la paret: 1.5mm (increased from 1.2mm in previous models)
• Refrigeració: Laser-welded, professional-grade jacketed cooling solution
• Cooling Surface Area: Up to 50% more cooling surface area compared to previous models
• Dimensions del paquet: 39 x 18 x 18 polzades
• Pes de l'article: 55 lliures

9. Garantia i Suport

For detailed warranty information and customer support, please refer to the official Ss Brewtech weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.

Ss Brewtech Official Weblloc: www.ssbrewtech.com