LUNINO H13 HEPA Air Purifier E-200 User Manual

Introducció

Thank you for choosing the LUNINO H13 HEPA Air Purifier E-200. This advanced air purification system is designed to effectively capture 99.97% of airborne contaminants, including pet hair, smoke, PM 2.5, and unpleasant odors, ensuring a healthier living environment. Its wide coverage area makes it ideal for various spaces such as bedrooms, living rooms, offices, nurseries, basements, and kitchens.

Image: LUNINO H13 HEPA Air Purifier E-200 in white, showcasing el seu disseny elegant.

Producte acabatview Vídeo

Vídeo: Una anàlisi completaview of the LUNINO H13 HEPA Air Purifier, demonstrating its features and design.

Característiques clau

• High Efficiency HEPA Filtration: Captures 99.97% of airborne contaminants, including pet hair, smoke, PM 2.5, and bad smells.
• Cobertura de l'habitació gran: Effectively purifies air in areas up to 2400 sq.ft.
• Multiple Fan Modes: Features 5 fan speed modes (Sleep/Auto/Low/Med/High) for customized airflow and noise levels as low as 15dB in Sleep mode.
• Funció d'aromateràpia: Add essential oils to the dedicated pad for a pleasant scent.
• Visualització de la qualitat de l'aire: Real-time PM2.5 levels and indicator light (Green: Good, Yellow: Normal, Red: Bad).
• Funció de temporitzador: Set operation for 2, 4, 8, or 12 hours for energy saving.
• Bloqueig per a nens: Evita canvis accidentals a la configuració.
• Recordatori de substitució del filtre: Indicator light notifies when filter replacement is needed.

Image: Diagram illustrating the 2400 sq.ft. coverage area and CADR of 300 m³/h.

Image: Air purifier operating in sleep mode with a baby sleeping peacefully, highlighting its quiet operation (15dB).

Configuració

1. Desempaquetar el purificador d'aire: Traieu amb cura el purificador d'aire i tots els accessoris de l'embalatge.
2. Eliminar l'embalatge del filtre: The H13 HEPA filter comes pre-installed but is sealed in plastic packaging for protection.
   • Locate the front panel of the air purifier.
   • Gently pull the front panel to detach it from the main unit.
   • Carefully remove the filter from its compartment.
   • Traieu tots els envasos de plàstic del filtre.
3. Torneu a instal·lar el filtre: Place the filter back into the air purifier with the "OUTWARD" side facing you. Ensure it fits snugly.
4. Reattach the Front Panel: Align the front panel with the unit and push it gently until it clicks into place.
5. Connecteu-vos a l'alimentació: Connecteu el cable d'alimentació a una presa de corrent adequada.
6. Initial Preheating: Upon first power-on, the air purifier will enter a preheating state, and the indicator light may flash for approximately one minute. This is normal.

Image: Visual representation of the filter removal and installation process, showing the filter's effectiveness.

Instruccions de funcionament

Tauler de control acabatview

The control panel is located on the top of the unit and features intuitive touch buttons for easy operation.

Image: Close-up of the control panel showing the Air Quality Display and various function buttons.

Funcions:

• Botó On/Off: Press to turn the air purifier on or off.
• Botó de velocitat: Cycles through Sleep, Low, Medium, and High fan speeds.
  • Mode de repòs: Operates at a quiet 15dB, ideal for undisturbed rest.
• Auto Mode (A): The air purifier automatically adjusts fan speed based on real-time air quality detected by the PM2.5 sensor.
• Botó de llum: Toggles the ambient light on/off. Useful for bedrooms at night.
• Botó del temporitzador: Sets the operating duration to 2, 4, 8, or 12 hours. The unit will automatically shut off after the set time.
• Botó de bloqueig: Long press to activate/deactivate the child lock, preventing accidental changes to settings.
• Aromatherapy Pad: Located on the top surface. Slide open the cover and add a few drops of your favorite essential oil to the cotton pad. The fan will diffuse the scent into the room.

Manteniment

Substitució del filtre

The air purifier has a filter replacement reminder function. When the filter reaches the end of its service life (recommended every 3-6 months depending on usage), the filter replacement indicator light will illuminate.

1. Apagueu i desconnecteu el purificador d'aire.
2. Remove the front panel and the old filter as described in the Setup section.
3. Dispose of the old filter properly.
4. Install a new official LUNINO H13 HEPA filter (search B0CMC2HHZH on Amazon). Ensure the "OUTWARD" side faces you.
5. Torneu a col·locar el panell frontal.
6. Plug in and turn on the air purifier. The filter replacement indicator light should reset.

Neteja

• Netegeu l'exterior del purificador d'aire amb un drap suau i sec.
• The pre-filter layer of the H13 HEPA filter can be gently vacuumed to remove larger dust particles between replacements. Do not wash the filter.

Resolució de problemes

• La unitat no s'encén: Ensure the power cord is securely plugged into both the unit and the wall outlet. Check if the filter is correctly installed and its plastic packaging removed.
• Flux d'aire reduït o soroll inusual: Check if the filter is clogged and needs cleaning or replacement. Ensure there are no obstructions around the air intake or outlet.
• Air quality reading remains "Bad": Ensure the air quality sensor on the side of the unit is not obstructed or dirty. Clean the sensor area if necessary.

Especificacions

Garantia i Suport

LUNINO is committed to providing reliable products and excellent customer service. Your LUNINO H13 HEPA Air Purifier E-200 comes with:

• 2 anys de substitució gratuïta: For any manufacturing defects.
• 30 Days No Reason to Return Policy: Per a la teva tranquil·litat.
• Suport de per vida: Suport dedicat per garantir la vostra satisfacció.
• 24 Hours Quick Response: Via phone or email for any inquiries.

For support, please refer to the contact information provided in your product packaging or visit the official LUNINO store on Amazon.