1. Introducció
The UNI-T UT202R is a high-precision digital clamp meter designed for accurate electrical measurements. It features automatic ranging, True RMS capabilities, and a clear LCD backlight display. This manual provides essential information for the safe and effective operation of your device.
2. Informació de seguretat
Always adhere to local and national safety codes. Use appropriate personal protective equipment (PPE) such as insulated gloves and eye protection. Do not attempt to measure voltages or currents exceeding the specified maximum ratings. Ensure the device is in good working condition before use. Refer to the safety markings on the device and in the full product documentation.
- CAT III 300V / CAT II 600V: Indicates the measurement category and maximum voltage per a un funcionament segur.
- No utilitzar si està danyat: Inspect the meter and test leads for any damage before each use.
- Eviteu condicions humides: Do not operate the meter in wet environments.
- Seguretat de la bateria: Substituïu les piles quan aparegui l'indicador de bateria baixa.
3. Producte acabatview
3.1. Components
Imatge: Detallada view of the UNI-T UT202R Digital Clamp Meter with labels pointing to its various parts, including the clamp head, NCV sensor, NCV warning lamp, function turntable, function switch button, LED display, relative value button, Max/Min button, data hold/backlight button, black probe socket, and red probe socket.
- Clamp Cap: S'utilitza per a la mesura de corrent sense contacte.
- Sensor NCV: Vol. Sense contactetage detecció.
- NCV Warning Lamp: Illuminates during NCV detection.
- Tong Head Trigger: Opens the clamp mandíbula.
- Function Turntable (Dial): Selects measurement modes.
- Function Switch Button (SELECT): Toggles between functions within a dial setting.
- Pantalla LED: High-definition display for measurement readings.
- REL/Zero Button: For relative measurement or zeroing.
- Botó MAX/MIN: Registra els valors màxims i mínims.
- HOLD/Backlight Button: Freezes the display reading or activates backlight.
- Probe Sockets (COM, VΩHz): Connect test leads for voltage, resistance, frequency, and other measurements.
3.2. Característiques de la pantalla
- LCD HD Display: Ofereix mesures clares i fàcils de llegir.
- Funció de llum de fons: Millora la visibilitat en condicions de poca llum.
- Larger Screen and Display Digits: Improves readability of measurement values.
4. Configuració
4.1. Instal·lació de la bateria
The UNI-T UT202R requires 2 AA batteries (included). To install or replace batteries:
- Assegureu-vos que el comptador estigui apagat.
- Localitza la tapa de la bateria a la part posterior del dispositiu.
- Utilitzeu un tornavís per obrir la tapa de la bateria.
- Insert the 2 AA batteries, observing correct polarity (+/-).
- Tanqueu de manera segura la tapa de la bateria.
5. Instruccions de funcionament
This section details the various measurement functions of the UNI-T UT202R Digital Clamp Meter. Always select the appropriate function on the dial before making any measurements.
5.1. Mesura de corrent alterna
To measure AC current, rotate the function dial to the 'A~' position. Open the clamp jaw using the trigger and enclose a single conductor. The display will show the AC current reading. The meter supports selectable frequency for AC current measurements.
Video: Demonstration of AC current measurement using the clamp meter on an electrical panel, showing the current reading on the display. The video also highlights selectable frequency.
5.2. AC Voltage Mesura
Per mesurar AC voltage, rotate the function dial to the 'V~' position. Connect the red test lead to the VΩHz input jack and the black test lead to the COM input jack. Apply the test leads across the circuit points to measure AC voltage. The meter supports selectable frequency for AC voltage mesures.
Video: Demonstration of AC voltage measurement using test leads on an electrical panel, showing the voltage reading on the display. The video also highlights selectable frequency.
5.3. DC Voltage Mesura
Per mesurar DC voltage, rotate the function dial to the 'V=' position. Connect the red test lead to the VΩHz input jack and the black test lead to the COM input jack. Apply the test leads across the circuit points to measure DC voltage. This is demonstrated on a car battery and an electric bicycle battery.
Video: Demonstration of DC voltage measurement on a car battery and an electric bicycle battery, showing the voltage readings on the display.
5.4. Mesura de Resistències
To measure resistance, rotate the function dial to the 'Ω' position. Connect the test leads across the component to be measured. The display will show the resistance value in Ohms (Ω).
Video: Demonstration of resistance measurement on a circuit board, showing the resistance value on the display.
5.5. Mesura de díodes
To test diodes, rotate the function dial to the 'Diode' symbol position. Connect the test leads across the diode. A healthy diode will show a voltage drop in one direction and an open circuit (OL) in the reverse direction.
Video: Demonstration of diode measurement on a circuit board, showing the voltage drop reading on the display.
5.6. Prova de continuïtat
To perform a continuity test, rotate the function dial to the 'Continuity' symbol position. Connect the test leads across the circuit or component. The meter will emit an audible beep if continuity is detected (low resistance).
Video: Demonstration of a continuity test using test leads on a wire, showing the audible beep and display reading for continuity.
5.7. Mesura de la capacitat
To measure capacitance, rotate the function dial to the 'Capacitance' symbol position. Connect the test leads across the capacitor. The display will show the capacitance value. The UT202R supports capacitance measurement up to 4mF.
Video: Demonstration of capacitance measurement on a capacitor, showing the capacitance value on the display.
5.8. Mesura de la temperatura
To measure temperature, rotate the function dial to the 'Temperature' symbol position. Connect a K-type thermocouple (not included) to the meter. Place the thermocouple tip on the object or area to be measured. The display will show the temperature reading. The UT202R supports temperature measurement from -40°C to 1000°C.
Video: Demonstration of temperature measurement using a thermocouple on an air conditioning unit, showing the temperature reading on the display.
5.9. Mesura de freqüència
To measure frequency, rotate the function dial to the 'Hz%' position. Connect the test leads to the circuit. The display will show the frequency value. The UT202R supports frequency measurement up to 10MHz.
Video: Demonstration of low voltage frequency measurement using a signal generator, showing the readings on the display.
5.10. Vol sense contactetage (NCV) Measurement
Per detectar el volum de CAtage without contact, rotate the function dial to the 'NCV' position. Bring the NCV sensor near the conductor. The NCV warning lamp will illuminate, and the meter will beep, indicating the presence of AC voltage. The UT202R features 4-level NCV measurement for varying signal strengths.
Video: Demonstration of 4-level NCV measurement on electrical busbars, showing the NCV indicator and audible alerts.
5.11. Current Usage with Splitter (Optional Accessory)
For convenient measurement of home appliance current usage, the UT200+ series can be used with a splitter (e.g., UNI-T UT-LS15-US, sold separately). This accessory separates the live and ground wires, allowing the clamp meter to accurately measure the current of a plugged-in appliance.
Video: Demonstration of measuring current usage of a home appliance using the clamp meter with a UT-LS15-US splitter.
6. Especificacions
The following table outlines the key specifications for the UNI-T UT202R Digital Clamp Metre.
Image: Detailed specifications table for the UT200+ and UT200R series, including AC current, AC current frequency response, DC current, AC voltage, vol. ACtage frequency response, high voltage frequency, DC voltage, resistance, capacitance, temperature, frequency, display count, jaw opening, relative mode, zero mode, and category ratings.
Image: Table outlining features such as auto range, True RMS, continuity test, diode, low battery indication, data hold, Max/Min, and auto power off. Also includes characteristics like standard accessories, batteries, display, product size, product net weight, standard individual packing, standard quantity per carton, standard carton measurement, and standard carton gross weight.
| Paràmetre | Valor |
|---|---|
| Número de model | UT202R |
| Corrent alterna (A) | 400A |
| Corrent DC (A) | No disponible |
| Vol. ACtage (V) | 600 V |
| DC Voltage (V) | 600 V |
| Resistència (Ω) | 40 MΩ |
| Capacitat (F) | 4 mF |
| Temperatura (°C) | -40°C~1000°C |
| Freqüència (Hz) | 10Hz ~ 10MHz |
| Nombre de visualitzacions | 4000 |
| Obertura de la mandíbula | 28 mm |
| RMS veritable | Sí |
| Llum de fons | Sí |
| Font d'alimentació | 2 piles AA (incloses) |
| Certificacions | CE, UKCA, cETLus |
7. Manteniment
To ensure the longevity and accuracy of your UNI-T UT202R Digital Clamp Meter, follow these maintenance guidelines:
- Neteja: Netegeu el mesurador amb un drap sec i suau. No utilitzeu abrasius ni dissolvents.
- Emmagatzematge: Store the meter in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Calibració: For professional applications, periodic calibration by qualified personnel is recommended to maintain accuracy.
- Cables de prova: Inspeccioneu regularment els cables de prova per detectar talls, esquerdes o aïllament danyat. Substituïu-los immediatament si trobeu algun dany.
8. Solució De Problemes
If you encounter issues with your UNI-T UT202R, refer to the following common troubleshooting steps:
- Sense pantalla/Pantalla tènue: Check battery installation and replace batteries if necessary. Ensure the meter is turned ON.
- Lectures incorrectes:
- Ensure the correct measurement function is selected.
- Verify test lead connections are secure and undamaged.
- Check for proper contact with the circuit or component.
- For current measurements, ensure only one conductor is within the clamp mandíbula.
- "OL" (Overload) Display: El valor mesurat supera l'interval seleccionat. Canvieu a un interval superior o assegureu-vos que la mesura estigui dins de les capacitats del mesurador.
- Sense bip de continuïtat: Check if the circuit is truly continuous or if the resistance is too high for the continuity threshold.
If problems persist, contact UNI-T customer support or a qualified technician.
9. Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial d'UNI-T. weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
