1. Primers passos
1.1 Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x T-Display-S3-Long-3.4-V1.0 Development Board
- 2 x STEMMA QT/Qwiic Interface Cables [P352]
- 1 x Battery Cable
1.2 Tauler acabatview
The LILYGO T-Display-S3-Long is a compact development board featuring the ESP32-S3R8 microcontroller and a 3.4-inch capacitive touch TFT LCD. It integrates wireless connectivity and various interfaces for versatile projects.
1.3 Característiques clau
- MCU: ESP32-S3R8 Dual-core LX7 microprocessor
- Connectivitat sense fils: Wi-Fi 802.11, BLE 5 + BT mesh
- Programming Platforms: Arduino-IDE, VS Code
- Onboard Functions: Boot Button, Reset Button, Battery Switch
- Visualització: 3.4-inch Capacitive Touch TFT LCD, Resolution: 180(H)RGB x 640(V), Interface: QSPI
1.4 Board Layout and Connectors
The board features several connectors and buttons for power, expansion, and control.
- Port USB-C: Used for power, data transfer, and programming. Supports OTG 5V output.
- JST-GH 1.25mm LiPo Bat Connector: For connecting an external LiPo battery.
- Qwiic Connectors: Two connectors for I2C peripheral expansion.
- 1.27 Pitch IO Extension: Pin headers for extending GPIO functionality.
- Botó d'arrencada: Used for entering bootloader mode for firmware flashing.
- Botó de restabliment: Resets the microcontroller.
- Interruptor de bateria: Controls power from the connected battery.
1.5 Product Introduction Video
Watch this video for a visual introduction to the LILYGO T-Display-S3-Long development board and its features.
Video 1.1: Introduction to the LILYGO T-Display-S3-Long development board, showcasing its display and various components.
2. Configuració
2.1 Powering the Board
The T-Display-S3-Long can be powered via its USB-C port or an external LiPo battery.
- Alimentació USB-C: Connect the board to a computer or a 5V USB power adapter using a USB-C cable.
- Potència de la bateria: Connect a compatible LiPo battery to the JST-GH 1.25mm connector. Ensure the battery switch is in the ON position.
2.2 Configuració del programari
To program the board, you will need to set up a development environment.
- Install Arduino IDE or VS Code: Download and install your preferred programming environment.
- ESP32-S3 Board Support: Add ESP32-S3 board support to your chosen IDE. Refer to the Espressif documentation or LILYGO's GitHub for detailed instructions.
- Conductors: Ensure necessary USB-to-serial drivers are installed for your operating system.
- GitHub Resources: Accés example code and detailed documentation at the official LILYGO GitHub repository: github.com/Xinyuan-LilyGO/T-Display-S3-Long
3. Instruccions de funcionament
3.1 Funcionament bàsic
- Encès: Connect the board to a power source (USB-C or battery). The display should initialize.
- Restablir: Premeu el botó Restableix button to restart the current program running on the ESP32-S3.
- Mode del carregador d'arrencada: To flash new firmware, hold down the Arrencada , premeu i deixeu anar el botó Restableix button, and finally release the Arrencada button. The board will now be in bootloader mode, ready to receive new code from your IDE.
3.2 Ús de la pantalla
The 3.4-inch capacitive touch TFT LCD allows for interactive applications.
- Entrada tàctil: Utilize the capacitive touch functionality for user interaction within your applications.
- Gràfics: Program the display to show text, images, and graphical interfaces at its 180x640 resolution.
3.3 Connectivitat sense fil
The integrated Wi-Fi and Bluetooth capabilities enable network and device communication.
- Wi-Fi: Connect to 802.11 Wi-Fi networks for internet access or local network communication.
- Bluetooth: Use BLE 5 or classic Bluetooth mesh for short-range wireless communication with other devices.
4. Manteniment
4.1 Atenció general
- Emmagatzematge: Guardeu la placa en un entorn sec i antiestàtic quan no la feu servir.
- Neteja: Use a soft, dry cloth to clean the display and board. Avoid liquid cleaners.
- Manipulació: Handle the board by its edges to minimize contact with electronic components and prevent static discharge.
- Temperatura: Operate and store the board within recommended temperature ranges to ensure optimal performance and longevity.
5. Solució De Problemes
5.1 Problemes comuns
- Board Reboots Unexpectedly:
- Ensure a stable power supply. A 5V/3A power source is recommended to prevent power-related reboots.
- Review your code for potential memory leaks, infinite loops, or unhandled exceptions that could cause system instability.
- Check for loose connections or shorts on the board.
- La pantalla no funciona:
- Verify that the board is powered correctly.
- Ensure your program includes the correct display initialization code and libraries.
- Check for any physical damage to the display or its connection to the main board.
- Unable to Upload Code:
- Confirm that the correct board and port are selected in your IDE.
- Ensure the board is in bootloader mode (refer to Section 3.1).
- Check USB cable integrity and try a different USB port.
- Verify that necessary drivers are installed.
6. Especificacions
6.1 Especificacions tècniques
| Característica | Detall |
|---|---|
| Processador | ESP32-S3R8 Dual-core LX7 microprocessor (240 MHz) |
| RAM | PSRAM |
| Memòria Flash | 16 MB |
| Tipus sense fil | Wi-Fi 802.11, BLE 5 + BT mesh |
| Mostra | 3.4-inch Capacitive Touch TFT LCD |
| Resolució de visualització | 180(H)RGB x 640(V) |
| Suport del sistema operatiu | FreeRTOS, Linux |
| Fabricant | LILYGO |
| Nom del model | T-Display-S3-Long |
7. Suport i Recursos
7.1 Assistència addicional
For detailed technical documentation, code examples, and community support, visit the official LILYGO GitHub repository:
LILYGO T-Display-S3-Long GitHub Repository
7.2 Informació de la garantia
For specific warranty details regarding your LILYGO T-Display-S3-Long development board, please refer to the LILYGO official weblloc web o poseu-vos en contacte amb el punt de compra. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
