Introducció
Welcome to the user manual for your TAB Fairy10 Robot Vacuum and Mop Combo. This advanced cleaning device is designed to provide comprehensive floor care with its powerful 6000 Pa suction, hidden LiDAR navigation for precise mapping, and intelligent features such as self-drying, auto-empty, and auto-refill capabilities. Its 15mm auto-lift dual mops and AI 3.0 obstacle avoidance ensure efficient and thorough cleaning across various floor types.
Contingut del paquet
Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:
- Robot Vacuum × 1
- Charging Base × 1
- Adaptador × 1
- HEPA Filters × 4 (2 pairs)
- Raspall de neteja × 1
- Side Brushes × 4 (2 pairs)
- Manual d'usuari × 1
- Cable d'alimentació × 1
- Disposable Dust Bags × 2
- Mop Cloths × 2 Pairs
Figure 1: All included components in the TAB Fairy10 package.
Configuració
1. Desembalatge i col·locació
- Remove all packaging materials and protective films from the robot and the charging base.
- Place the charging base against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the base.
- Connect the power cable to the charging base and plug it into a power outlet.
2. Càrrega del robot
- Col·loca el robot a la base de càrrega. Assegura't que els contactes de càrrega del robot estiguin alineats amb els de la base.
- The robot will automatically begin charging. For first-time use, fully charge the robot before operation (approximately 6 hours).
3. Omplir els dipòsits d'aigua
- Open the top cover of the charging base to access the clean water tank and dirty water tank.
- Remove the clean water tank and fill it with clean tap water. You may add a small amount of non-foaming, robot-safe cleaning solution if desired.
- Ensure the dirty water tank is empty before starting a cleaning cycle.
- Return both tanks to their respective slots in the charging base.
Figure 2: The TAB Fairy10 Robot Vacuum and its comprehensive charging station.
Figura 3: Mésview of the station's automated functions: self-cleaning, self-emptying, self-drying, and self-refilling.
Instruccions de funcionament
1. Encès / apagat
- To power on, press and hold the power button on the robot for 3 seconds until the indicator lights up.
- To power off, press and hold the power button for 3 seconds while the robot is stationary.
2. Connexió a l'aplicació mòbil
- Download the official TAB app from your smartphone's app store.
- Follow the in-app instructions to connect your robot to your home Wi-Fi network. This will enable remote control, scheduling, map management, and cleaning mode selection.
3. Modes de neteja
The TAB Fairy10 supports various cleaning modes, selectable via the mobile app:
- Mode de buit: Per a la recollida de deixalles seques.
- Mode fregona: Per a la neteja humida de terres durs.
- Mode aspiradora i fregona: Aspiració i fregada simultànies.
- Neteja de punts: Concentrated cleaning for specific dirty areas.
- Neteja de zones: Neteja les àrees definides per l'usuari al mapa.
4. Navegació i evitació d'obstacles
The robot utilizes hidden LiDAR navigation to create precise maps of your home, ensuring efficient cleaning paths. Its AI 3.0 obstacle avoidance technology helps it detect and navigate around common household items, reducing the chance of getting stuck.
Figure 4: The robot's hidden LiDAR navigation allows it to clean under furniture effectively.
Figure 5: The powerful 6000Pa suction ensures thorough cleaning of various debris.
Figure 6: AI 3.0 obstacle avoidance helps the robot navigate around household items.
5. Automatic Mop Lifting and Dual Dirt Solution
The robot features automatic mop lifting by 15mm when it detects carpets, preventing wetting. For mopping, it applies 10N pressure and rotates at 180 rpm, providing effective scrubbing for stubborn dirt.
Figure 7: The automatic 15mm mop lifting feature protects carpets during mopping cycles.
Figure 8: The dual dirt solution combines high-speed rotation and pressure for effective mopping.
Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del teu robot aspirador.
1. Emptying the Dustbin and Replacing Dust Bag
- The robot automatically empties its internal dustbin into the disposable dust bag in the charging base.
- Replace the disposable dust bag in the charging base when the indicator light or app notification indicates it is full.
2. Neteja de les fregones
- The charging base automatically cleans and dries the mop pads after each mopping cycle.
- Periodically remove the mop pads and hand wash them with water and mild detergent to remove any residual dirt. Allow them to air dry completely before reattaching.
3. Neteja dels filtres
- Tap the HEPA filters gently to remove loose dust. Do not wash HEPA filters with water.
- Replace HEPA filters every 3-6 months, or as needed, depending on usage.
4. Raspalls de neteja
- Remove the main brush and side brushes. Use the provided cleaning tool to cut and remove any tangled hair or debris.
- Wipe the brushes with a dry cloth.
5. Neteja dels sensors i dels contactes de càrrega
- Wipe all sensors (cliff sensors, wall sensor, LiDAR sensor window) and charging contacts on both the robot and the charging base with a clean, dry cloth.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El robot no s'encén ni carrega. | Battery low; charging contacts dirty; power cable disconnected. | Ensure robot is on charging base; clean charging contacts; check power cable connection. |
| El robot es queda encallat sovint. | Obstacles in path; sensors dirty. | Clear cables, small objects, and thick rugs; clean all sensors. |
| Mal rendiment de neteja. | Dustbin full; brushes tangled; filters clogged; water tank empty. | Empty dustbin; clean/replace brushes; clean/replace filters; refill clean water tank. |
| Problemes de connexió de l'aplicació. | Incorrect Wi-Fi password; robot too far from router; app outdated. | Verify Wi-Fi credentials; move robot closer to router; update app; restart robot and router. |
| Mop pads not drying properly. | Insufficient airflow; station vents blocked. | Ensure station is in a well-ventilated area; clear any obstructions around station vents. |
Especificacions
| Característica | Especificació |
|---|---|
| Marca | TAB |
| Nom del model | Fairy 10 (M50-PT-US) |
| Característica especial | Auto-Docking, Self-Drying, Auto Empty & Refill, 15mm Auto-Lift Dual Mops, Obstacle Avoidance |
| Color | Negre |
| Dimensions del producte (L x A x A) | 18.8" x 18.8" x 19.2" |
| Tipus de filtre | Cartutx (HEPA) |
| Durada de la bateria | 120 minuts |
| Font d'alimentació | Funciona amb bateria |
| Bateria de liti Voltage | 3.6 Volts |
| Factor de forma | Rectangular (Base), Round (Robot) |
| Pes de l'article | 41.5 lliures |
| Fabricant | SHENZHEN FENGCHAO NEW TECHNOLOGY CO., LTD |
| Data de primera disponibilitat | 7 de novembre de 2024 |
Figure 9: Regulatory and manufacturing information.
Garantia i Suport
The TAB Fairy10 Robot Vacuum and Mop Combo comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or contact TAB customer support.
For technical assistance, troubleshooting, or spare parts inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt and product serial number handy when contacting support.
