Manual d'usuari de l'arrencador de bateria NEXPOW G17 S40

1. Introducció

Thank you for choosing the NEXPOW G17 S40 Jump Starter. This device is designed to provide a reliable solution for jump-starting vehicles, charging portable electronics, and offering emergency lighting. Please read this manual thoroughly before operating the device to ensure safe and efficient use. Keep this manual for future reference.

2. Què hi ha a la caixa

Carefully unpack the contents and ensure all items are present and in good condition.

NEXPOW G17 S40 Jump Starter
Smart Jumper Cables with Protection System
Cable de càrrega USB-A a USB-C
Cable de càrrega USB-C a USB-C
Estoig d'EVA
Manual d'usuari

Contents of the NEXPOW G17 S40 Jump Starter package — Image: The NEXPOW G17 S40 Jump Starter, smart jumper cables, charging cables, and EVA storage case are included in the package.

3. Producte acabatview

The NEXPOW G17 S40 is a versatile portable power device. It features a high-capacity battery, multiple output ports, and an integrated LED light. Familiarize yourself with the components shown below.

Diagram of NEXPOW G17 S40 Jump Starter with labeled ports and buttons — Image: Labeled diagram of the NEXPOW G17 S40 showing the Power Button, Power Indicator Light, Jump Clamp Port, USB Output 1 (18W), USB Output 2 (12W), Type-C In/Out (PD 60W Max), DC Output (168W Max), and LED Light.

Especificacions tècniques

Característica	Especificació
Model	G17 S40
Corrent màxima	4000 Amps
Compatibilitat del motor	All Gas Engines, up to 10.0L Diesel Engines
Tipus de bateria	Ió de liti (4 inclosa)
Sortida USB 1	18W (5V/3A, 9V/2A, 12V/1.5A)
Sortida USB 2	12 W (5 V/2.1 A)
Entrada/sortida tipus C	PD 60 W màx
Sortida de corrent continu	Màxim 168W
Llum LED	400 Lumens (Flashlight, Strobe, SOS modes)
Dimensions (P x A x A)	3.73" x 8.89" x 1.65"
Pes	1.5 lliures

4. Càrrega de l'arrencador de bateria

Before initial use, fully charge the NEXPOW G17 S40. It is recommended to recharge the device every 2-3 months if not used for extended periods to maintain battery health.

Using a Wall Charger (PD60W)

Connect the provided USB-C to USB-C cable to the Type-C In/Out port on the jump starter.
Connect the other end of the cable to a 60W PD wall adapter (not included).
Charging from 0% to 100% takes approximately 1.5 hours with a 60W adapter.

NEXPOW G17 S40 being charged by a 60W wall adapter — Image: The NEXPOW G17 S40 Jump Starter connected to a wall outlet via a USB-C cable and a 60W adapter for quick charging.

Using a Car Charger

Connect the appropriate charging cable (e.g., USB-A to USB-C) to the jump starter and a car charger (not included).
Charging from 0% to 100% takes approximately 4-5 hours using a car charger.

5. Configuració

Before using the jump starter, ensure it is fully charged. Check the power indicator lights on the device to confirm its charge level.

6. Operating Instructions - Jump Starting a Vehicle

The NEXPOW G17 S40 can jump start 12V vehicles, including all gasoline engines and diesel engines up to 10.0L.

NEXPOW G17 S40 Jump Starter connected to a car battery, illustrating its capability to start various 12V vehicles — Image: The NEXPOW G17 S40 Jump Starter with its clamps connected to a car battery, indicating its use for cars, trucks, motorcycles, and boats with 4000A peak current.

Preparar el vehicle: Ensure the vehicle's ignition is off and all accessories (lights, radio, AC) are turned off. Place the vehicle in park (automatic) or neutral (manual) and engage the parking brake.
Connecteu els cables de connexió a l'arrencador de botons: Insert the blue end of the smart jumper cable into the jump clamp port on the NEXPOW G17 S40. Ensure a secure connection.
Connectar Clamps a la bateria del cotxe:
- Connecteu el vermell (+) clamp al terminal positiu (+) de la bateria del vehicle.
- Connecteu el negre (-) clamp al terminal negatiu (-) de la bateria del vehicle.
The indicator light on the smart jumper cable will show the connection status. A solid green light indicates a correct and safe connection.
Arrancar el vehicle: Once the smart cable indicator is solid green, start the vehicle's engine. If the vehicle does not start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
Eliminar Clamps: Un cop arrencat el vehicle, retireu immediatament el clau negre (-).amp from the car battery, then remove the red (+) clamp. Disconnect the smart jumper cable from the jump starter.

Four-step visual guide on how to jump start a vehicle using the NEXPOW G17 S40 — Image: A visual guide showing the steps: 1. Insert jumper cable into jump starter. 2. Connect clamps to car battery. 3. Start the car engine. 4. Remove the jump clamps.

7. Operating Instructions - Power Bank Function

The NEXPOW G17 S40 can also function as a portable power bank to charge various electronic devices.

NEXPOW G17 S40 Jump Starter charging a smartphone and tablet via USB ports — Image: The NEXPOW G17 S40 Jump Starter connected to a smartphone and a tablet, demonstrating its use as a portable power bank with USB Output 1 (18W), USB Output 2 (12W), Type-C In/Out (PD 60W Max), and DC Output (168W Max).

Sortides USB: Use the USB Output 1 (18W) or USB Output 2 (12W) ports to charge smartphones, tablets, Bluetooth headsets, and other USB-powered devices. Connect your device's charging cable to the appropriate USB port on the jump starter.
Type-C In/Out (PD 60W): This port can also be used to quickly charge compatible devices that support Power Delivery (PD) up to 60W. Use a USB-C to USB-C cable for this function.
DC Output (168W Max): This port can power 12V DC devices with a maximum output of 168W. Ensure your device is compatible with this output.

8. Operating Instructions - LED Light Function

The NEXPOW G17 S40 features a 400-lumen LED light with three modes for various emergency situations.

Diagram illustrating the three modes of the 400-lumen emergency LED light on the NEXPOW G17 S40 — Image: The NEXPOW G17 S40's LED light functions: Flashlight (long press for 3 seconds), SOS (short press), and Strobe (short press).

Mode llanterna: Long press the LED button for 3 seconds to turn on the flashlight.
Mode estroboscòpic: With the flashlight on, short press the LED button to switch to strobe mode.
Mode SOS: From strobe mode, short press the LED button again to activate SOS signaling.
To turn off the LED light, long press the LED button again from any mode.

9. Manteniment

Proper maintenance ensures the longevity and optimal performance of your jump starter.

Emmagatzematge: Store the jump starter in a cool, dry place away from direct sunlight, moisture, and flammable materials. The ideal storage temperature is between -4°F to 140°F (-20°C to 60°C).
Recàrrega: If the device has not been used for a long time, it is recommended to charge it every 2-3 months to keep the internal battery in a healthy state and prevent deep discharge.
Neteja: Feu servir un drap suau i sec per netejar l'exterior del dispositiu. No utilitzeu productes químics agressius ni netejadors abrasius.
Inspecció del cable: Regularly inspect the smart jumper cables for any signs of damage, such as frayed wires, cracked insulation, or corroded clamps. Replace damaged cables immediately.

10. Solució De Problemes

If you encounter issues with your NEXPOW G17 S40, refer to the following table for common problems and solutions.

Problema	Causa possible	Solució
L'arrencador de botons no s'encén.	La bateria està completament descarregada.	Carregueu completament l'arrencada de salt abans d'utilitzar-lo.
El vehicle no arrenca després d'un intent de salt.	Incorrect connection; Vehicle battery too severely discharged; Other vehicle issues.	Assegureu-vos que clamps are connected correctly (red to +, black to -). Check smart cable indicator for solid green. Try again after 30 seconds. If still no start, vehicle may have other mechanical or electrical problems.
Smart jumper cable indicator light is red or flashing.	Connexió de polaritat inversa; Curtcircuit; Sobretemperatura.	Desconnectar clamps and reconnect correctly. Ensure clamps do not touch each other. Allow device to cool down if hot. Refer to smart cable manual for specific error codes.
Device not charging when plugged in.	Charging cable or adapter faulty; Charging port damaged.	Try a different charging cable and adapter. Ensure connections are secure. If problem persists, contact customer support.
LED light does not work.	Battery too low; Malfunction.	Charge the jump starter. If fully charged and light still fails, contact customer support.

11. Informació de seguretat

Adhere to these safety guidelines to prevent injury or damage to the device and vehicle.

NEXPOW G17 S40 Jump Starter connected to a car battery with emphasis on advanced security protection features — Image: The NEXPOW G17 S40 Jump Starter connected to a car battery, highlighting its updated heavy-duty jump clamps, 10 intelligent safety protections, and built-in smart chip technology.

Llegiu totes les instruccions abans d'utilitzar el producte.
Do not short-circuit the smart jumper clamps. Avoid connecting the red and black clamps junts.
Do not expose the device to rain, water, or extreme temperatures.
Mantingueu el dispositiu lluny dels nens.
Utilitzeu el dispositiu en una zona ben ventilada.
Do not attempt to jump start a frozen or visibly damaged battery.
If the device becomes excessively hot during use, discontinue use immediately and allow it to cool down.
Only use the provided smart jumper cables with the device.
Do not disassemble or modify the device. This will void the warranty and may cause safety hazards.

12. Garantia i Suport

NEXPOW products come with a standard warranty. For detailed warranty information, product support, or to report any issues, please refer to the warranty card included in your package or visit the official NEXPOW website. You may also contact NEXPOW customer service directly for assistance.

	Manual d'usuari del motor d'arrencada NEXPOW AP1 amb compressor d'aire Manual d'usuari complet per a l'arrencador de vehicles NEXPOW AP1 amb compressor d'aire, que detalla les característiques, el funcionament, les especificacions i els avisos de seguretat per a l'arrencada de vehicles amb ajuda d'ajudes i l'inflat de pneumàtics.
	Manual d'usuari del motor d'arrencada NEXPOW AP1 amb compressor d'aire Manual d'usuari complet per a l'arrencador de juntes i compressor d'aire NEXPOW AP1. Aprèn sobre les seves característiques, especificacions, funcionament, avisos de seguretat i resolució de problemes.
	Manual d'usuari de l'arrencador de cotxe portàtil NEXPOW G17 Manual d'usuari complet per a l'arrencador de cotxe portàtil NEXPOW G17, que detalla les característiques, les especificacions, les instruccions de càrrega, els procediments d'arrencada amb bateria, les condicions d'error, els avisos i la informació de garantia.
	Manual d'usuari de l'arrencador de cotxe multifunció NEXPOW Q9B Manual d'usuari complet per a l'arrencador de cotxe multifunció NEXPOW Q9B. Aprèn sobre el contingut del paquet, el diagrama del producte, les especificacions tècniques, les instruccions de càrrega, el funcionament de la llanterna LED, l'ús del cable d'arrencada intel·ligent, l'arrencada assistida de vehicles, les preguntes freqüents, la resolució de problemes i els avisos de seguretat.
	Manual d'usuari de l'arrencador i bateria externa NEXPOW T11F Manual d'usuari complet per a l'arrencador i banc d'energia extern NEXPOW T11F, que detalla les seves característiques, funcionament, instruccions de seguretat i resolució de problemes per a l'arrencada auxiliar de vehicles i dispositius de càrrega.
	Manual d'usuari de l'arrencador de cotxe portàtil multifunció NEXPOW Q10S Apreneu a utilitzar i mantenir amb seguretat l'arrencador de cotxe portàtil multifunció NEXPOW Q10S. Aquest manual d'usuari proporciona instruccions detallades per a l'arrencada de vehicles, la càrrega de dispositius mòbils, l'ús de la llanterna LED, la resolució de problemes comuns i la comprensió de les especificacions del producte.

NEXPOW G17 S40