Instruccions importants de seguretat
Please read and follow all safety instructions carefully before operating this product. Failure to do so may result in damage to the product, injury, or electric shock.
- PERILL: To avoid possible electric shock, special care should be taken when handling aquarium equipment. For each of the following situations, do not attempt to repair yourself; return the appliance to an authorized service facility for service or discard the appliance.
- Si l'aparell cau a l'aigua, NO reach for it. First, unplug it and then retrieve it. If electrical components get wet, unplug the appliance immediately.
- Examineu acuradament l'aparell després de la instal·lació. No s'ha de connectar si hi ha aigua a les peces que no estan pensades per estar mullades.
- No feu servir cap aparell si té un cable o un endoll danyats, si no funciona bé o s'ha caigut o s'ha fet malbé d'alguna manera.
- To avoid the possibility of the appliance plug or receptacle getting wet, position the aquarium stand and tank to one side of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. A "drip loop" should be arranged by the user for each cord connecting an aquarium appliance to a receptacle. The "drip loop" is the part of the cord below the level of the receptacle, or the connector if an extension cord is used, to prevent water from traveling along the cord and coming into contact with the receptacle. If the plug or receptacle does get wet, NO unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then, unplug and examine for the presence of water in the receptacle.
- És necessària una supervisió estreta quan qualsevol aparell és utilitzat per o a prop dels nens.
- To avoid injury, do not contact moving parts or hot parts such as heaters, reflector, lamp bombetes, etc.
- Desendolleu sempre un aparell de la presa de corrent quan no l'utilitzeu, abans de posar o treure peces i abans de netejar-lo. No estireu mai el cable per treure l'endoll de la presa. Agafeu l'endoll i estireu per desconnectar.
- No utilitzeu un aparell per a res que no sigui l'ús previst. L'ús d'accessoris no recomanats o venuts pel fabricant de l'aparell pot provocar una condició insegura.
- No instal·leu ni emmagatzemeu l'aparell on estigui exposat a la intempèrie o a temperatures per sota del punt de congelació.
- Ensure the appliance is securely installed before operating it.
- Llegiu i observeu tots els avisos importants de l'aparell.
- Si és necessari un cable d'extensió, s'ha d'utilitzar un cable amb una classificació adequada. Un cable classificat per menys amperes o watts que el valor nominal de l'aparell es poden sobreescalfar. S'ha de tenir cura de disposar el cable de manera que no s'ensopegui ni s'estira.
- Aquest aparell té un endoll polaritzat (una fulla és més ampla que l'altra). Com a característica de seguretat, aquest endoll només s'adaptarà a una presa polaritzada d'una manera. Si l'endoll no encaixa completament a la presa de corrent, inverteix l'endoll. Si encara no encaixa, poseu-vos en contacte amb un electricista qualificat. No utilitzeu mai amb un cable d'extensió tret que l'endoll es pugui inserir completament. No intenteu derrotar aquesta característica de seguretat.
- ADVERTIMENT: Do not allow water to splash onto the light fixture.
Contingut del paquet
Verifiqueu que tots els components siguin presents i en bon estat en obrir l'envàs.
- NICREW SlimLED Aquarium Light Fixture
- Adjustable Mounting Brackets (2x)
- Adaptador d'alimentació
- Manual d'instruccions
Configuració i instal·lació
Follow these steps to properly install your NICREW SlimLED Aquarium Light.
1. Attaching Adjustable Brackets
The light features extendable mounting brackets, allowing easy installation on a variety of aquarium widths. Slide the brackets into the channels on each end of the light fixture.

Image: Adjustable brackets are designed to slide onto the light fixture and extend to fit various aquarium sizes. Arrows indicate the direction of adjustment.
2. Posicionament de la llum
Place the light fixture with the attached brackets securely on the rim of your aquarium. Adjust the brackets to ensure a stable fit. Ensure the light is centered over the aquarium for even illumination.
3. Potència de connexió
Connect the power adapter to the light fixture's input port. Then, plug the power adapter into a suitable electrical outlet, ensuring a drip loop is formed with the power cord to prevent water from reaching the outlet.
Instruccions de funcionament
The NICREW SlimLED light features an integrated controller for easy management of lighting modes, brightness, and timer functions.
Controlador acabatview

Image: The inline controller features buttons for Power, White/Daylight (W/D) timer, and Blue/Night (B/N) timer, allowing simplified control over the light's functions.
- Botó d'encesa:
- Long press: Turns the light ON/OFF.
- Short press: Switches between lighting modes (e.g., full spectrum, blue only).
- W/D Button (White/Daylight Timer): Sets the timer for daylight mode.
- Available settings: 6H, 8H, 10H.
- Adjusts brightness of white LEDs.
- B/N Button (Blue/Night Timer): Sets the timer for moonlight mode.
- Available settings: 2H, 4H, 6H.
- Adjusts brightness of blue LEDs.
Ajust de brillantor
The light offers 6 adjustable brightness levels for both white/red LEDs and blue LEDs, allowing customization for your aquarium's needs.
- White and Red LEDs: Brightness can be adjusted to 5%, 20%, 40%, 60%, 80%, 100%.
- Blue LEDs: Brightness can be adjusted to 0%, 5%, 20%, 40%, 60%, 80%, 100%.
- Use the W/D button to cycle through white LED brightness levels and the B/N button to cycle through blue LED brightness levels.
Funció de temporitzador
The integrated timer allows for automated lighting cycles, simulating natural sunrise and sunset effects.

Image: The light simulates a natural gradient effect, mimicking sunrise and sunset to create a realistic and beneficial environment for aquarium inhabitants.
- Daylight Mode (W/D): Choose between 6, 8, or 10 hours of full-spectrum illumination.
- Moonlight Mode (B/N): Choose between 2, 4, or 6 hours of blue-only illumination.
- Once set, the light will automatically turn on and off at the programmed times each day.
- The recommended illumination time for aquatic plants is 8 to 10 hours per day.
Manteniment
Proper maintenance ensures the longevity and optimal performance of your aquarium light.
- Neteja: Always unplug the light before cleaning. Use a soft, damp cloth to wipe the light fixture. Do not use harsh chemicals or abrasive cleaners. Ensure no water enters the electrical components.
- Inspecció: Regularly inspect the power cord and plug for any signs of damage. Check the light fixture for any cracks or wear.
- Exposició a l'aigua: The light is designed for use over an aquarium. However, avoid direct water splashes onto the fixture. If water does get on the light, unplug it immediately and dry it thoroughly before re-use.

Image: The aluminum alloy shell provides excellent corrosion resistance and efficient heat dissipation, contributing to the light's durability and lifespan.
Resolució de problemes
If you encounter issues with your NICREW SlimLED light, refer to the following common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. |
|
|
| Timer function not working correctly. |
|
|
| La sortida de llum és tènue o inconsistent. |
|
|
Especificacions
Detailed technical specifications for the NICREW SlimLED Aquarium Light (Model N18921).
| Característica | Detall |
|---|---|
| Número de model | N18921 |
| Marca | NICREW |
| Dimensions (L x A x A) | 26 x 5.6 x 1.2 cm (Light fixture only) |
| Pes | 350 g |
| Consum d'energia | 9 watts |
| Flux lluminós | 600 LM (as per product title) |
| Tipus de LED | Diode Electroluminescent (LED) |
| Nombre de LED | 48 (36 White, 8 Blue, 4 Red) |
| Temperatura de color | 6500K (White LEDs) |
| Blue LED Wavelength | 460 nm |
| Red LED Wavelength | 660 nm |
| Voltage | 230 volts (CA) |
| Material | Aliatge d'alumini |
| Característiques especials | Memory Function, Adjustable Brightness, Integrated Timer, Extendable Brackets |
| Compatibilitat amb aquaris | 28-42 cm (for this specific model) |

Image: Technical data for the 28-42 cm SlimLED model, including 36x 6500K White LEDs, 8x 460nm Blue LEDs, 4x 660nm Red LEDs, 50 PAR@30cm in air, 3100 LUX@30cm in air, 90 CRI, 9 Watt total power consumption, and 65 lm/W efficacy. Spectral graphs illustrate blue and red spectrum for plant growth and chlorophyll absorption.

Image: This table provides a comparison of various SlimLED models, detailing the aquarium sizes they fit, their physical dimensions, and wattage. The current model (28-42 cm) is 9W.
Eficiència energètica

Image: EU Energy Label for NICREW model N18921, indicating an energy efficiency class G and an energy consumption of 9 kWh per 1000 hours. For more details, visit the Base de dades EPREL.
Garantia i Suport
NICREW products are manufactured with quality and reliability in mind. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official NICREW weblloc.
Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.





