SOFLOW SO2 Zero Electric Scooter User Manual

1. Introducció

Welcome to the SOFLOW SO2 Zero Electric Scooter user manual. This document provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before first use to ensure optimal performance and safety.

Figure 1.1: The SOFLOW SO2 Zero Electric Scooter, showcasing el seu disseny elegant i la seva construcció robusta.

2. Informació de seguretat

La vostra seguretat és primordial. Seguiu sempre les directrius següents:

• Porteu sempre casc i equip de protecció adequat (genolleres, colzeres) quan aneu en bicicleta.
• Familiaritzeu-vos amb les lleis i regulacions locals sobre l'ús de patinets elèctrics.
• No conduïu sota els efectes de l'alcohol o les drogues.
• Avoid riding in heavy rain, snow, or on slippery surfaces.
• Mantingueu una distància de seguretat amb altres vehicles i vianants.
• Regularly check the scooter for any loose parts, damage, or abnormal wear before each ride.
• La capacitat màxima de pes és de 100 kg. No supereu aquest límit.
• This scooter is designed for one rider only. Do not carry passengers.

3. Contingut del paquet

Assegureu-vos que tots els elements siguin presents al paquet:

• SOFLOW SO2 Zero Electric Scooter
• Carregador
• Manual d'usuari

4. Muntatge i muntatge

4.1 Desplegament del patinet

The SO2 Zero comes pre-assembled in a folded state for compact transport.

1. Col·loqueu el patinet sobre una superfície plana.
2. Localitzeu el pestell del mecanisme de plegat a prop de la base de la tija del manillar.
3. Release the latch and carefully lift the handlebar stem until it locks into the upright position. Ensure the locking mechanism is fully engaged.

Figure 4.1: The SOFLOW SO2 Zero in its folded state, demonstrating the compact design for storage and transport.

4.2 Càrrega inicial

Before your first ride, fully charge the scooter's battery.

1. Locate the charging port, typically on the side of the footboard.
2. Connecteu el carregador al port de càrrega del patinet.
3. Plug the charger into a standard power outlet. The indicator light on the charger will change (e.g., red to green) when charging is complete.
4. Disconnect the charger once fully charged. Avoid overcharging.

5. Instruccions de funcionament

5.1 Engegada/Apagada i Visualització

The scooter features a clear display for essential information.

• To power on, press and hold the power button on the handlebar. The display will illuminate.
• The display shows speed, battery level, and riding mode.
• Per apagar l'aparell, premeu i manteniu premut el botó d'engegada de nou fins que la pantalla s'apagui.

Figure 5.1: The clear display on the handlebar provides real-time information such as speed and battery status.

5.2 Conduint el scooter

Ensure you are in a safe, open area for your first ride.

1. Place one foot firmly on the wide footboard.
2. Empeny amb l'altre peu per guanyar impuls inicial.
3. Gently press the accelerator lever/button on the handlebar to engage the motor.
4. Maintain balance and steer by leaning and turning the handlebars.

5.3 Frenades

The SO2 Zero is equipped with a reliable braking system.

• To slow down or stop, gently squeeze the brake lever on the handlebar.
• Apply brakes smoothly to avoid sudden stops, especially at higher speeds.
• The scooter features a maintenance-free braking system for consistent performance.

Figure 5.2: Detail of the rear wheel and the maintenance-free braking system, ensuring reliable stopping power.

5.4 NFC Unlock Feature

El NFC integrat tag allows for convenient unlocking.

• Ensure your smartphone has NFC enabled.
• Tap your smartphone near the NFC tag located on the scooter (refer to the scooter's specific NFC tag ubicació).
• The scooter will unlock, allowing you to power it on and ride.

6. Manteniment

Un manteniment regular garanteix la longevitat i el funcionament segur del vostre scooter.

• Neteja: Netegeu el patinet amb anunciamp cloth. Do not use high-pressure water or corrosive cleaners.
• Pressió dels pneumàtics: The 8.5-inch air tires require proper inflation. Check tire pressure regularly and inflate to the recommended PSI (usually indicated on the tire sidewall or in specifications).

Figure 6.1: The front wheel with its 8.5-inch air tire, providing a smooth riding experience.

• Sistema de fre: The SO2 Zero features a maintenance-free braking system. However, periodically inspect brake levers and cables for any signs of damage or excessive play.
• Cura de la bateria: Store the scooter in a cool, dry place. If storing for extended periods, charge the battery to approximately 50-70% and recharge every 1-2 months to prevent deep discharge.
• Inspecció general: Regularly check all screws, bolts, and connections for tightness. Ensure the folding mechanism operates smoothly and locks securely.

7. Solució De Problemes

Consulteu la taula següent per veure els problemes habituals i les seves solucions.

8. Especificacions

Detailed technical specifications for the SOFLOW SO2 Zero Electric Scooter:

9. Garantia i Suport

SOFLOW products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official SOFLOW website. For technical support, spare parts, or service inquiries, please contact SOFLOW customer service through their official channels.

Informació de contacte: Please refer to the SOFLOW official website or your purchase documentation for the most up-to-date contact details.