ANENG Multimeter Tester User Manual

Introducció

This user manual provides comprehensive instructions for the safe and effective operation of your ANENG Multimeter Tester (Model SZ301) and Non-Contact Voltage Tester (Model VC1019). These tools are designed for measuring various electrical properties, including AC/DC voltage, current, resistance, capacitance, continuity, and diode testing, as well as non-contact voltage detection. Please read this manual thoroughly before use to ensure proper functionality and safety.

Informació de seguretat

Always adhere to the following safety precautions when using the ANENG Multimeter Tester and Non-Contact VoltagProvador:

• Risc de descàrrega elèctrica: No intenteu mesurar el voltages or currents exceeding the specified maximum ratings. Always ensure the device is properly connected before applying power.
• Aïllament: Ensure your hands are dry and you are standing on an insulated surface when performing measurements.
• Condició de la sonda: Inspect test leads and probes for any damage before each use. Do not use if insulation is compromised.
• Protecció de sobrecàrrega: The multimeter features anti-burn with double fuses and overload protection. However, avoid intentional overloading.
• Vol. Sense contactetagProvador: The NCV function is for indication only. Always verify voltage presence with a contact method before working on circuits.
• Seguretat de la bateria: Use only the specified battery type (AAA 1.5V). Do not mix old and new batteries or different battery types.
• Manteniment: Refer to the maintenance section for cleaning and care. Do not attempt to repair the device yourself.

Producte acabatview i Components

The ANENG Multimeter Tester and VC1019 Pen Tester are designed for comprehensive electrical measurements and non-contact voltage detecció.

Figura 1: Acabatview of the ANENG Multimeter Tester (SZ301) and VC1019 Pen Tester, including test leads, batteries, and user manuals.

ANENG SZ301 Multimeter Features:

• Pantalla LCD gran: Clear and easy-to-read screen for measurement values.
• Marcador rotatiu: Selects various measurement functions (Voltage, Current, Resistance, Capacitance, Diode, Continuity).
• Preses d'entrada: Dedicated ports for test leads (COM, VΩmA+, 10A).
• Botons de funció: Such as 'SEL' for mode selection and 'HOLD' to freeze readings.
• Suport de peu: Integrated stand for convenient viewing.

Figura 2: Detallada view of the ANENG SZ301 Multimeter's rotary dial for function selection.

ANENG VC1019 Pen Tester Features:

• NCV Inductive Probe: Detecta AC voltagi sense contacte directe.
• Funció de transmissió de veu: Announces voltage presence and other alerts.
• Indicador LED: Visual indication of voltage presence (red tip).
• Llanterna: Built-in light for working in dark areas.
• Ajust de sensibilitat: Allows for varying detection sensitivity.
• Detecció de cables en fase: Identifies live or neutral wires automatically.
• Infrared Laser Positioning: Per a una focalització precisa.

Figura 3: The ANENG VC1019 Pen Tester showcasing its voice broadcasting capabilities.

Configuració

Instal·lació de la bateria:

Both the SZ301 Multimeter and VC1019 Pen Tester require batteries for operation. The package includes 4x 1.5V AAA batteries.

1. Locate the battery compartment on the back of each device.
2. Obriu la tapa de la bateria.
3. Insert the AAA batteries, ensuring correct polarity (+ and -).
4. Tanqueu la tapa de la bateria amb seguretat.

Figura 4: The product package includes the necessary AAA batteries for both devices.

Connecting Test Leads (for SZ301 Multimeter):

For most measurements, connect the red and black test leads to the appropriate input jacks on the multimeter.

• Inseriu el cable de prova negre al connector "COM" (comú).
• Per al voltage, resistance, capacitance, and diode measurements, insert the red test lead into the "VΩmA+" jack.
• For current measurements (up to 10A), insert the red test lead into the "10A" jack. For smaller currents (mA), use the "VΩmA+" jack.

Instruccions de funcionament

Using the ANENG SZ301 Multimeter:

Turn the rotary dial to the desired measurement function. The display will show the reading.

1. AC/DC Voltage Mesura:

• Set the rotary dial to the "V~" (AC Voltage) o "V-" (Volumen de CCtage) abast.
• Connecteu els cables de prova en paral·lel al circuit o component que es mesura.
• Llegeix el voltage valor a la pantalla.

Figura 5: Mesurar AC voltage using the ANENG SZ301 Multimeter.

2. Current Measurement (AC/DC):

• Important: Connecteu el multímetre en sèrie amb el circuit.
• Set the rotary dial to the "A~" (AC Current) or "A-" (DC Current) range.
• Ensure the red test lead is in the appropriate current jack (10A or VΩmA+ for mA).
• Llegiu el valor actual a la pantalla.

3. Resistance Measurement:

• Set the rotary dial to the "Ω" (Ohms) range.
• Assegureu-vos que el circuit estigui desenergitzat abans de mesurar la resistència.
• Connecteu els cables de prova a través del component.
• Llegiu el valor de la resistència.

4. Prova de continuïtat:

• Set the rotary dial to the continuity symbol (often shared with diode or resistance).
• Connecteu els cables de prova a través del circuit o component.
• A continuous beep indicates a low-resistance path (continuity).

5. Prova de díodes:

• Set the rotary dial to the diode symbol.
• Connecteu el cable vermell a l'ànode i el cable negre al càtode del díode.
• A forward voltage drop will be displayed. Reverse the leads; an open circuit (OL) indicates a good diode.

6. Capacitance Measurement:

• Set the rotary dial to the "F" (Farad) range.
• Assegureu-vos que el condensador estigui completament descarregat abans de fer la prova.
• Connecteu els cables de prova a través del condensador.
• Llegiu el valor de la capacitança.

Using the ANENG VC1019 Pen Tester (Non-Contact Voltage Detector):

The VC1019 is designed for quick and safe detection of AC voltagi sense contacte directe.

1. NCV Detection:

• Turn on the VC1019.
• Bring the NCV inductive probe tip near a terminal strip, outlet, or insulated wire.
• Si AC voltage is detected, the tip will glow red, and the device will beep. The voice broadcast function will announce "Danger! High Voltage" or "low voltage" depending on the detected field strength.

Figura 6: Using the VC1019 Pen Tester to detect voltage in an electrical setup.

Figura 7: The VC1019 Pen Tester's ability to differentiate between live (firewire) and neutral (zero line) connections.

2. Live Wire Detection:

• The device automatically identifies live or neutral wires. A stronger indication (faster beeping, brighter light, "Danger! High Voltage" voice) typically signifies a live wire.

3. Funció de llanterna:

• Press the designated button (refer to device markings) to activate the built-in flashlight for illumination in dark environments.

4. Infrared Laser Positioning:

• Some models feature an infrared laser for precise targeting. Activate it via the corresponding button.

Figura 8: The VC1019 Pen Tester's infrared laser for precise targeting.

Manteniment

• Neteja: Wipe the devices with a dry, clean cloth. Do not use abrasive cleaners or solvents.
• Emmagatzematge: Store the multimeter and pen tester in a cool, dry place away from direct sunlight and extreme temperatures.
• Substitució de la bateria: Replace batteries when the low battery indicator appears on the display to ensure accurate readings. Remove batteries if the device will not be used for an extended period.
• Inspecció de cables de prova: Regularly inspect test leads for cuts, cracks, or other damage to the insulation. Replace damaged leads immediately.

Resolució de problemes

Especificacions

Garantia i Suport

ANENG provides lifetime service and technical support for this electrical tester package. For any questions, technical assistance, or warranty claims, please contact ANENG customer service through the retailer or the official ANENG weblloc.

Per a més informació, podeu visitar el ANENG Store on Amazon.