Manual d'instruccions del netejador robòtic de piscines BWT Cosmy The Bot 250

1. Introducció

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat per reduir el risc de lesions o danys:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Mantingueu els nens i les mascotes allunyats de la zona de la piscina quan el netejador estigui en funcionament.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Ensure the cleaner is fully submerged before starting operation.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Components del producte

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Unitat principal: The robotic cleaner body, housing the motor and filtration system.
• Cistella de filtre: Removable basket for collecting debris.
• Pinzells/Rodets: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• Unitat de subministrament d'energia: Converts AC power to safe DC power for the cleaner.

Imatge 3.1: Frontal view of the cleaner, highlighting the cleaning brushes and intake area.

Imatge 3.2: Part inferior view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Imatge 3.3: Interna view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Configuració

1. Desempaquetar el netejador: Traieu amb cura el netejador i tots els accessoris de l'embalatge.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Lloc a la piscina: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Connectar: Plug the power supply unit into a grounded electrical outlet.

5. Instruccions de funcionament

1. Inicia el cicle de neteja: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Ajustar la potència d'aspiració: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Neteja del monitor: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Remove from Pool: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del vostre robot netejador de piscines.

6.1. Neteja de la cistella del filtre

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Desconnecteu l'alimentació: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Open Filter Compartment: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Remove Filter Basket: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Filtre d'esbandida: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Torna a inserir el filtre: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Tanca la tapa: Close the filter compartment lid securely.

Imatge 6.1: Part superior view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Neteja i emmagatzematge generals

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Guardeu el netejador en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Coil the floating cable loosely to prevent kinks or damage.

7. Solució De Problemes

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.

8. Especificacions

9. Garantia i Suport

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Fabricant: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.