Introducció
The EPOS CH 40 Charging Stand, model 1001139, is designed to provide convenient and efficient charging for your compatible EPOS devices. Featuring both wireless charging capabilities and a dedicated port for wired charging, this stand ensures your devices are always ready for use. Its robust design and compact footprint make it an ideal accessory for any workspace.
Figure 1: The EPOS CH 40 Charging Stand. This image displays the stand's minimalist design, featuring a stable base with the EPOS logo and a vertical support arm with a charging interface at the top.
Configuració
Follow these steps to set up your EPOS CH 40 Charging Stand:
- Desempaquetar el suport: Carefully remove the EPOS CH 40 Charging Stand and the included charging cable from its packaging.
- Connectar l'alimentació: Insert the small end of the provided charging cable into the power input port located on the back or bottom of the CH 40 stand. Connect the other end of the charging cable to a suitable USB power adapter (not included) or a powered USB port.
- Col·locació: Place the charging stand on a stable, flat surface, ensuring adequate ventilation around the device.
- Initial Charge (if applicable): While the stand itself is powered by the cable, ensure your devices are fully charged before first use for optimal battery life.
Instruccions de funcionament
The EPOS CH 40 Charging Stand offers two primary methods for charging compatible devices:
Càrrega sense fils
- Dispositiu de posició: Place your wireless charging-compatible EPOS device onto the designated wireless charging area of the CH 40 stand. This area is typically located at the top or front of the stand where the device rests.
- Confirma la càrrega: Ensure the device is correctly aligned. A charging indicator light on the stand (if present) or on your device will illuminate to confirm that charging has begun.
- Col·locació òptima: For best results, ensure there are no obstructions between the device and the charging surface.
Càrrega per cable
- Connectar el cable: Use the appropriate charging cable for your EPOS device (often the same cable used to power the stand, or a separate one provided with your device). Connect one end to your device and the other end to the dedicated wired charging port on the CH 40 stand.
- Confirma la càrrega: A charging indicator on your device will confirm that charging is active.
Always refer to your specific EPOS device's manual for detailed charging requirements and battery care.
Manteniment
Proper maintenance ensures the longevity and optimal performance of your EPOS CH 40 Charging Stand:
- Neteja: Disconnect the stand from power before cleaning. Use a soft, dry, lint-free cloth to wipe the surface. Do not use abrasive cleaners, solvents, or aerosol sprays, as these may damage the finish or internal components.
- Emmagatzematge: Quan no l'utilitzeu durant períodes prolongats, guardeu el suport en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Eviteu líquids: Keep the stand away from water and other liquids. If liquid spills on the stand, immediately disconnect power and allow it to dry completely before reconnecting.
Resolució de problemes
If you encounter issues with your EPOS CH 40 Charging Stand, refer to the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no es carrega sense fil. | Device not properly aligned; foreign objects on charging surface; incompatible device. | Reposition the device on the charging area. Remove any metal objects or thick cases. Ensure your device supports Qi wireless charging. |
| Device not charging via cable. | Cable not fully connected; faulty cable; power source issue. | Ensure both ends of the charging cable are securely connected. Try a different USB port or power adapter. Test with another compatible cable if available. |
| Stand has no power/indicator light off. | Cable d'alimentació desconnectat; problema amb la presa de corrent. | Check that the charging cable is securely plugged into the stand and the power source. Try a different power outlet. |
If the problem persists after trying these solutions, please contact EPOS customer support.
Especificacions
| Característica | Detall |
|---|---|
| Marca | EPOS |
| Número de model | 1001139 (CH 40) |
| Font d'alimentació | External Power Adapter (via Charging Cable) |
| Components inclosos | Cable de càrrega |
| Característica especial | Càrrega sense fils |
| Pes de l'article | 1.01 lliures (aprox. 0.46 kg) |
| Dimensions del paquet | 9.4 x 6.1 x 4.4 polzades (aprox. 23.9 x 15.5 x 11.2 cm) |
| UPC | 840064409414 |
| Data de primera disponibilitat | 19 de novembre de 2023 |
Nota: Les especificacions estan subjectes a canvis sense previ avís.
Garantia i Suport
For warranty information and technical support, please refer to the official EPOS weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
EPOS Official Weblloc: www.eposaudio.com
Atenció al client: Consulteu el weblloc web per obtenir informació de contacte regional i horari d'assistència.
