SwellPro Fisherman MAX FD2 Waterproof Fishing Drone Instruction Manual

1. Producte acabatview

The SwellPro Fisherman MAX FD2 is a high-performance waterproof fishing drone designed for delivering bait to inaccessible areas and assisting in fishing operations. It features a robust design, a 4K camera, and a dual payload release system for efficient bait deployment.

Característiques principals:

• 7.7 lbs (3.5 kg) bait capacity
• IP67 Saltwater-proof rating
• Calibration-free operation
• No Geofencing restrictions
• Integrated 4K camera for clear visuals
• Dual Payload Release (DPL) system

Figure 1: SwellPro Fisherman MAX FD2 drone, remote controller, intelligent battery, and propellers.

2. Què hi ha a la caixa

Verifiqueu que tots els components siguin presents en desembalar:

• Fisherman Max Drone (Advanced) x1
• Gimbal Camera (GC1-M) x1
• Intelligent Battery (B-FD2) x1
• Propellers (P-FD2) x2 sets
• Dual Payload Release (DPL) x1
• Control remot x1
• Maleta de transport x1
• Accessory Pack (includes charger, cables, etc.) x1

3. Guia de configuració

Follow these steps to prepare your drone for flight.

3.1. Desembalatge i muntatge inicial

1. Place the carry case on a flat, stable surface and open it.
2. Carefully remove the drone and accessory pack from the case.
3. Place the drone on a flat platform.
4. Install the Intelligent Battery: Align the battery slot with the pin connector inside the drone's compartment. Gently push until it clicks into place. Secure the battery by locking the four latches (numbered 1 to 4).
5. Unfold Aircraft Arms: Unfold the front arms (marked with 'F') first, then unfold the rear arms (marked with 'R'). Rotate the rings in the direction of the arrow to tighten each arm securely.
6. Remove Camera Protection: Carefully remove the protection foam from the camera gimbal.
7. Attach Propellers: Place the orange-marked propellers on the orange-marked motors and rotate the mount counter-clockwise to tighten. Place the black propellers on the black motors and rotate the mount clockwise to tighten. Ensure all propellers are firmly attached.

Video 1: Detailed guide on unpacking, battery installation, arm unfolding, and propeller attachment for the SwellPro Fisherman MAX FD2 drone.

3.2. Optional: Floating Bar Attachment

If flying close to water, attaching the floating bars is recommended for buoyancy.

1. Remove the straps on each floating bar.
2. Place each floating bar under the corresponding drone arm and lock the latches to secure them.

3.3. Configuració del comandament a distància

1. Ajust de l'antena: Tilt down the antennas for better transmission if flying at a high altitude. Tilt up the antennas if flying close to the water surface.
2. Instal·lació del suport del telèfon: Install the phone holder onto the remote controller by turning the screw clockwise to secure it. This is necessary if you plan to use the companion app.
3. Encès: Ensure all toggles on the remote controller are switched up. Short press the power button once, then long press for 2 seconds to power on the remote controller.

Figure 2: SwellPro Fisherman MAX FD2 remote controller with phone holder attached.

4. Instruccions de funcionament

4.1. Llista de verificació prèvia al vol

Abans de cada vol, feu les comprovacions següents:

1. Verify no damage to propellers.
2. Ensure the battery is firmly locked.
3. Confirm antennas are tightened.
4. Check that all payloads are firmly attached.
5. Ensure the sealing flap over the USB port of the remote controller is closed.
6. Verify the Micro SD card is inserted into the camera with the sealing flap closed.

4.2. Controls bàsics de vol

Familiarize yourself with the remote controller joysticks:

• Joystick esquerre: Controls vertical position (up/down) and yaw (left/right rotation).
• Joystick dret: Controls horizontal movement (forward/backward, left/right strafing).

Video 2: Tutorial on basic flight controls for SwellPro Fisherman drones, including vertical and horizontal movements.

4.3. Bait Release Operation

To deploy bait using the Dual Payload Release (DPL) system:

1. Attach your bait to the DPL system securely.
2. Fly the drone to the desired location.
3. Once at the target, activate the payload release switch on your remote controller.

Video 3: Demonstration of the drone airdrop system and bait release function.

4.4. Torna a casa (RTH)

The Return to Home function allows the drone to automatically return to its takeoff point. Activate RTH using the designated button on your remote controller.

5. Manteniment

5.1. Post-Flight Cleaning

After each flight, especially in saltwater environments, it is crucial to clean your drone:

• Ensure the battery compartment is sealed before rinsing.
• Flush out each motor with fresh water to remove salt and sand.
• Dry the drone thoroughly with a towel or allow it to air dry completely.

5.2. Càrrega de la bateria

Proper battery charging ensures longevity and safe operation:

• Always charge the drone battery below 4 amps. A lower amperage setting (e.g., 2.5 amps) is recommended for battery health.
• Insert charger cables into the battery and remote as instructed by the charger's manual.
• The charger will indicate "FULL" when charging is complete.

Video 4: Instructions on how to charge the FD3 battery, applicable to Fisherman MAX FD2.

5.3. Emmagatzematge

Guardeu el drone en un lloc fresc i sec quan no l'utilitzeu.

6. Solució De Problemes

• El dron no s'encén: Ensure the intelligent battery is fully charged and correctly installed with all latches secured. Check the power button sequence (short press, then long press).
• Remote controller not connecting: Verify the remote controller is powered on and fully charged. Ensure antennas are correctly positioned for optimal signal.
• Hèlixs que no giren: Check for any obstructions around the propellers. Ensure propellers are correctly and securely attached.
• Missing Battery Charger: If the battery charger was not included in your kit, contact SwellPro customer service or your retailer for assistance.

7. Especificacions

8. Garantia i Suport

For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official SwellPRO store or contact their customer service directly.

Visit the SwellPRO Store