Informació important de seguretat
Read this instruction manual carefully before use to ensure safe operation and prevent damage to the product or injury.
This product is not a toy and should be operated with caution. Keep out of reach of small children. Always ensure proper battery installation and disposal. Do not expose the device to moisture or extreme temperatures.
Producte acabatview
An image showing the Absima CR9T RC Pistol Transmitter, a black and grey device with a screen displaying numerical information and a large steering wheel on the right side. The handle is ergonomically designed for grip.
The Absima CR9T is a 2.4 GHz 9-channel RC pistol transmitter designed for precise control of remote-controlled vehicles. It features an ergonomic design, a clear display for settings, and intuitive controls for an enhanced user experience.
Configuració
- Instal·lació de la bateria: Open the battery compartment cover located at the bottom of the transmitter. Insert the required batteries (not included) according to the polarity indicators. Close the cover securely.
- Enquadernació del receptor: Refer to your receiver's manual for specific binding instructions. Generally, power on the receiver in binding mode, then power on the transmitter while holding the bind button (if applicable).
- Calibració inicial: After binding, perform a basic calibration of the steering and throttle channels to ensure proper response.
Instruccions de funcionament
- Encès/apagat: Press and hold the power button until the display illuminates/shuts off.
- Control de direcció: Use the steering wheel on the right side to control the vehicle's direction.
- Control de l'accelerador: Use the trigger for forward and reverse movement. Pull for forward, push for reverse.
- Channel Assignment: Utilize the various switches and knobs on the transmitter to control auxiliary channels (e.g., lights, winches) as configured on your receiver.
- Navegació de la pantalla: Use the navigation buttons around the screen to access and adjust settings such as trim, EPA (End Point Adjustment), D/R (Dual Rate), and model memory.
Manteniment
- Neteja: Use a soft, dry cloth to clean the transmitter. Do not use harsh chemicals or solvents.
- Emmagatzematge: Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Cura de la bateria: Always use fresh batteries of the recommended type. Do not mix old and new batteries or different battery types.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Transmitter does not power on | Bateries gastades o mal instal·lades | Replace batteries; check polarity |
| No control response from vehicle | Not bound to receiver; receiver not powered; out of range | Re-bind transmitter and receiver; check receiver power; move closer to vehicle |
| Erratic control | Interference; low battery on transmitter/receiver | Move to a different location; replace batteries |
Especificacions
| Característica | Detall |
|---|---|
| Dimensions del producte | 14 x 10 x 18.5 cm |
| Pes | 320 g |
| Número de model de l'article | 2000012 |
| Nombre d'articles | 1 |
| Necessites piles? | No (for product, but required for operation) |
| Piles incloses? | No |
| ASIN | B0CP34F5K2 |
| Primera data disponible | 24 d'abril de 2024 |
Garantia i Suport
We understand that it can be frustrating if a product does not work properly or becomes defective. Fortunately, we provide a warranty for a period of at least 2 years after purchase.
For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Absima weblloc web. Si us plau, tingueu a mà el número de model (2000012) i el comprovant de compra quan us poseu en contacte amb el servei d'assistència.
