Introducció
This manual provides essential information for the safe and efficient use of your Panasonic FY-30KW-W wall-mounted heat exchange ventilation fan. Please read these instructions thoroughly before installation and operation, and keep this manual for future reference.
Informació de seguretat
Precaucions de seguretat importants:
- This product requires a pre-installed pipe for proper function. Refer to the construction manual for applicable pipe types. This unit cannot be installed on VP pipes.
- When operating the product, ensure the shutter lever is moved to the "open" position.
- If the outdoor temperature is -5°C or below, and the indoor temperature is 20°C with indoor relative humidity of 50% or more, condensation may form on the main unit's surface. Wipe any condensation with a cloth.
- During periods of low outdoor temperatures (below -10°C), or strong wind, rain, or snow (especially fog or powder snow), water or snow may enter with the supply air, causing dripping. In such cases, stop operation and close the shutter.
- Except for the conditions mentioned above, and during cleaning or inspection, do not stop operation to ensure continuous 24-hour ventilation.
- Multiple units cannot be operated with a single switch.
Configuració i instal·lació
Proper installation is crucial for the performance and safety of the unit. It is recommended that installation be performed by a qualified professional.
Dimensions i muntatge
Refer to the diagram below for external dimensions and mounting hole specifications. All measurements are in millimeters (mm).
Figure 1: External Dimension Diagram (Unit: mm)
Dimensions clau:
- Unitat principal: Width 280 mm, Height 280 mm, Depth 332 mm.
- Mounting Holes (Main Unit): 12 holes, Ø5 mm.
- Mounting Holes (Duct Attachment): 4 elongated holes, Ø5 mm.
- Extension Duct: Length 160 mm, Diameter Ø144 mm.
Ensure adequate space for installation and maintenance access. The unit requires a pre-installed pipe; confirm compatibility with the construction manual. Do not install on VP pipes.
Instruccions de funcionament
The Panasonic FY-30KW-W fan is designed for continuous ventilation with heat exchange capabilities.
Funcionament bàsic
- Encès: Connect the unit to a single-phase 100V, 50/60 Hz power supply.
- Shutter Position: Before operating, ensure the shutter lever is moved to the "open" position.
- Selecció de velocitat del ventilador: The unit offers two fan speed settings: Fort i Feble. Select the desired speed based on ventilation needs.
- Funcionament continu: For optimal indoor air quality, the unit is designed for 24-hour continuous ventilation. Avoid stopping operation unless necessary for maintenance or extreme weather conditions.
Condicions especials
- In severe weather (outdoor temperatures below -10°C, strong wind, rain, snow, fog, or powder snow), stop the unit and close the shutter to prevent water/snow ingress.
Manteniment
Regular maintenance ensures the longevity and efficiency of your ventilation fan.
Neteja i substitució del filtre
- The fresh air filter (for fine particles) should be cleaned approximately once a year.
- Replace the fresh air filter approximately once every two years.
- Nota: Filter replacement periods are guidelines. Depending on the usage environment, replacement may be required sooner.
Gestió de la condensació
- If condensation forms on the unit's surface under specific cold and humid conditions (outdoor -5°C or below, indoor 20°C and 50% humidity or more), wipe it immediately with a soft, dry cloth.
Resolució de problemes
This section addresses common issues you might encounter with your ventilation fan.
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no funciona. | Power supply issue; Shutter closed. | Check power connection. Ensure shutter lever is in the "open" position. |
| Water/snow entering the room. | Extreme outdoor weather conditions (low temperature, strong wind, rain, snow, fog). | Stop operation and close the shutter immediately. Resume operation when weather improves. |
| Condensation on unit surface. | Cold outdoor temperature (-5°C or below) combined with high indoor humidity (20°C, 50% RH or more). | Wipe the surface with a dry cloth. Consider adjusting indoor humidity if possible. |
| Reduced airflow or efficiency. | Clogged fresh air filter. | Clean or replace the fresh air filter as per maintenance guidelines. |
If problems persist after attempting these solutions, please contact Panasonic customer support or a qualified service technician.
Especificacions
Detailed technical specifications for the Panasonic FY-30KW-W heat exchange ventilation fan.
| Característica | Especificació |
|---|---|
| Número de model | FY-30KW-W |
| Dimensions (L x P x A) | 280 mm x 332 mm x 280 mm |
| Pes | 2.6 kg |
| Tipus de motor | 2-pole open capacitor induction motor |
| Font d'alimentació classificada | Single phase 100V, 50/60 Hz |
| Power Consumption (Strong/Weak) | 50Hz: 8.1W / 4.5W; 60Hz: 9.6W / 5.4W |
| Air Volume (Strong/Weak) | 50Hz: 30 m³/h / 18.5 m³/h; 60Hz: 30 m³/h / 18 m³/h |
| Effective Ventilation Volume (Strong/Weak) | 50Hz: 27.6 m³/h / 17.0 m³/h; 60Hz: 27.6 m³/h / 16.6 m³/h |
| Effective Ventilation Rate | 92% |
| Noise Level (Strong/Weak) | 50Hz: 27 dB / 18 dB; 60Hz: 27 dB / 18 dB |
| Temperature Exchange Efficiency (Strong/Weak) | 67% / 76% |
| Heat Exchange Efficiency (Cooling, Strong/Weak) | 50% / 58% |
| Heat Exchange Efficiency (Heating, Strong/Weak) | 57% / 68% |
| Classe d'aïllament | E |
| Materials | Louver, main frame, ducts, fans, intake filter cover: PP resin; Supply shutter: ABS resin; Exhaust shutter: PE+PP resin |
Garantia i Suport
Per obtenir informació sobre la garantia, consulteu la targeta de garantia inclosa amb el producte o visiteu el lloc web oficial de Panasonic. website. For technical support, service, or inquiries, please contact Panasonic customer service.
Nota: The lifespan of components like filters can vary based on usage environment. The stated replacement periods are guidelines and not a guarantee of performance for the entire period.
