Manual d'instruccions del llum de sostre convertible mitjà Hinkley Facet 46991BX

1. Informació important de seguretat

Si us plau, llegiu i enteneu totes les instruccions abans de començar la instal·lació. Si no ho feu, podeu patir descàrregues elèctriques, incendis o altres lesions. Conserveu aquestes instruccions per a futures consultes.

• Seguretat elèctrica: Always disconnect power at the main circuit breaker or fuse box before installation, servicing, or changing bulbs. Ensure all electrical connections comply with local codes and ordinances, as well as the National Electrical Code (NEC) and Canadian Electrical Code (CEC).
• Electricista qualificat: If you are unsure about wiring or installation, consult a qualified licensed electrician.
• Posada a terra: Aquest dispositiu ha d'estar correctament connectat a terra.
• Requisits de la bombeta: Utilitzeu només el tipus de bombeta i la potència especificatstage. No supereu la potència màximatage indicated on the fixture. This fixture requires (5) 12W Medium LED Bulbs (not included).
• Ubicació: This fixture is suitable for dry (indoor) locations only. Do not install in damp o ambients humits.
• Manipulació: Handle glass components with care. Wear gloves during installation to prevent fingerprints and cuts.

2. Contingut del paquet

Verify that all components listed below are present and undamaged before proceeding with installation.

• Fixture Assembly (Hexagonal body with etched glass)
• Canopy de muntatge
• (1) Vareta de baixada de 6 polzades
• (2) Barres de baixada de 12 cm
• Mounting Hardware Kit (screws, wire nuts, etc.)
• Manual d'instruccions

This image displays the Hinkley Facet Medium Convertible Ceiling Light in its Black Oxide finish, showcasing its hexagonal design and etched glass.

3. Instruccions d'instal·lació

3.1 Abans de començar

1. Apagueu l'alimentació a l'interruptor.
2. Carefully unpack the fixture and components. Retain all packaging until installation is complete.
3. Review the diagrams and ensure you have all necessary tools (e.g., screwdriver, wire strippers, ladder).

3.2 Mounting Options (Pendant or Flush Mount)

This fixture is convertible and can be installed as either a pendant or a flush mount. The included down rods allow for adjustable height in pendant configuration, suitable for even or sloped ceilings.

This diagram illustrates the dimensions of the light fixture when installed as a pendant, including its maximum height of 43.5 inches and diameter of 16.5 inches.

This diagram shows the dimensions of the light fixture when installed as a flush mount, indicating a height of 16 inches and a diameter of 16.5 inches.

3.3 Cablejat

1. Connecteu el suport de muntatge a la caixa de connexió amb els cargols proporcionats.
2. Connect the fixture's ground wire (usually bare copper or green) to the house ground wire using a wire nut.
3. Connect the fixture's neutral wire (usually white) to the house neutral wire (white) using a wire nut.
4. Connect the fixture's hot wire (usually black) to the house hot wire (black) using a wire nut.
5. Introduïu amb cura tots els cables a la caixa de connexió.

3.4 Assemblea final

1. Secure the canopy to the mounting bracket with the decorative nuts or screws.
2. Install the appropriate number of down rods for your desired pendant height, or directly attach the fixture for flush mount.
3. Install five (5) 12W Medium LED Bulbs (not included) into the sockets. Do not overtighten.
4. Resta l'alimentació al disjuntor i prova l'aparell.

Un detallat view of the Hinkley Facet light fixture in Black Oxide, configured as a pendant, highlighting its layered hexagonal structure.

4. Funcionament

Once installed and powered, the Hinkley Facet Ceiling Light operates like any standard hardwired light fixture. It is designed to be dimmable, allowing you to adjust the light output with a compatible dimmer switch (sold separately).

• Tipus de bombeta: Uses (5) 12W Medium LED Bulbs. Ensure bulbs are fully seated in their sockets.
• Funcionalitat regulable: For dimming capabilities, connect the fixture to a compatible LED dimmer switch. Follow the dimmer switch manufacturer's instructions for installation and operation.

5. Manteniment

Regular maintenance will help preserve the appearance and functionality of your Hinkley Facet Ceiling Light.

• Neteja: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Substitució de bombetes: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with the same type and wattage of bulb to maintain optimal performance and safety.
• Inspecció: Comproveu periòdicament si hi ha connexions soltes o cablejat danyat. Si trobeu algun problema, desconnecteu l'alimentació i consulteu un electricista qualificat.

6. Solució De Problemes

If your fixture is not operating correctly, refer to the following common issues and solutions:

• La llum no s'encén:
  • Comproveu si l’interruptor automàtic està activat.
  • Ensure bulbs are correctly installed and not burnt out.
  • Comproveu que totes les connexions dels cables siguin segures.
• Flickering or dimming issues:
  • Ensure bulbs are compatible with the dimmer switch (if installed).
  • Check for loose bulb connections.
  • Verify proper wiring to the dimmer switch.
• Humming noise:
  • Some LED bulbs or dimmer switches may produce a slight hum. If excessive, try different compatible bulbs or a different dimmer.

If troubleshooting steps do not resolve the issue, contact Hinkley customer support or a qualified electrician.

7. Especificacions

8. Garantia i Suport

This Hinkley lighting fixture comes with a limited warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.

• Tipus de garantia: Limitat
• Atenció al client: For technical assistance, replacement parts, or warranty claims, please contact Hinkley customer service. Contact information can typically be found on the Hinkley weblloc web o a l'embalatge.