1. Introducció
Thank you for choosing the ATUMTEK Wireless Bluetooth Camera Remote Shutter. This device allows you to remotely control your smartphone's camera for taking photos and videos, providing convenience for selfies, group shots, and stable long-exposure photography. This manual provides detailed instructions for setup, operation, and maintenance.
Image: Two ATUMTEK wireless Bluetooth camera remote shutters in white, with wrist straps.
Característiques principals:
- Tecnologia avançada Bluetooth 5.2: Ensures a stable and fast connection up to 10 meters (33 feet).
- Compatibilitat ampliada: Works with most iOS (iPhone) and Android smartphones.
- Long-Life Button Battery: Powered by a CR2032 battery (210mAh), capable of capturing over 20,000 photos.
- Disseny compacte i portàtil: Small dimensions (48.5mm x 33.7mm x 12.5mm) and lightweight (14g) for easy carrying.
- Detachable Wrist Strap: Provides added security and prevents loss.
2. Configuració
2.1 Unboxing
En obrir el paquet, assegureu-vos que hi hagi tots els components:
- ATUMTEK Wireless Bluetooth Camera Remote Shutter (2 units)
- Wrist Straps (2 units)
- Manual d'usuari
Image: The ATUMTEK product box and its contents: two white remote shutters, two wrist straps, and a user manual.
Vídeo: Un unboxing i mésview of the ATUMTEK Bluetooth Camera Remote Shutter, demonstrating its features and compact design.
2.2 Instal·lació de la bateria
The remote shutter comes with a pre-installed CR2032 button battery. If replacement is needed, follow these steps:
- Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
- Use a small tool or coin to gently open the compartment.
- Inseriu una nova bateria CR2032 amb el costat positiu (+) cap amunt.
- Tanqueu el compartiment de la bateria de manera segura.
Image: Close-up of a CR2032 lithium battery, which powers the remote shutter.
3. Instruccions de funcionament
3.1 Encès/Apagat
- Per girar ON: Slide the power switch on the side of the remote to the 'ON' position. The blue LED indicator will flash.
- Per girar OFF: Slide the power switch to the 'OFF' position.
3.2 Vinculació Bluetooth
Follow these steps to pair your ATUMTEK remote shutter with your smartphone:
- Ensure the remote shutter is turned ON. The blue LED will rapidly flash for 7 seconds, then enter a slow flash state, indicating it's in pairing mode.
- Al teu telèfon intel·ligent, vés a Configuració i habilitar Bluetooth.
- Look for "ATUMTEK" in the list of available devices.
- Tap on "ATUMTEK" to connect. If prompted, select "Pair".
- Once successfully paired, the blue LED on the remote will turn off.
Image: Bluetooth pairing instructions for iOS and Android devices.
Video: Detailed instructions on how to pair the ATUMTEK remote shutter with iOS and Android devices, and how to use its functions for photos and videos.
3.3 Fer fotos i vídeos
- Obre l'aplicació de càmera del teu telèfon intel·ligent.
- Ensure the camera app is in the desired mode (Photo or Video).
- Premeu el botó CÀMERA button on the remote shutter once to take a photo or start/stop video recording.
3.4 Estat dels indicadors LED
- Rapid Flashing (7 seconds after power on): Initial pairing mode.
- Parpelleig lent: Standby state, ready for pairing.
- Off (after pairing): Successfully connected to a device.
- Off (after 5 minutes of no operation): Enters sleep mode to conserve battery.
- Brief Light-up (when pressing button in sleep mode): Remote is waking up and re-entering pairing mode.
- Bateria baixa: The LED will turn off, and the connection may be lost. Replace the battery.
4. Manteniment
4.1 Substitució de la bateria
The remote uses a CR2032 button battery. When the battery is low or depleted, replace it as described in Section 2.2. A fresh battery can last for over 20,000 photos.
4.2 Neteja
To clean the remote shutter, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the device.
5. Solució De Problemes
5.1 Remote Not Pairing
- Comproveu la potència: Ensure the remote is turned ON.
- Check Bluetooth on Phone: Verifiqueu que el Bluetooth està activat al vostre telèfon intel·ligent.
- Nivell de bateria: A low battery can prevent successful pairing. Replace the CR2032 battery if necessary.
- Distància: Ensure the remote is within 10 meters (33 feet) of your smartphone.
- Interferència: Move away from other Bluetooth devices or strong electromagnetic fields.
5.2 Remote Not Taking Photos/Videos
- Camera App Open: The remote only functions when your smartphone's camera application is open and active.
- Android Specific Setting: For some Android devices (e.g., Samsung Galaxy S25 Ultra), you may need to adjust a camera setting. Go to Camera app > Quick controls icon (four small dots) > Settings icon > Shooting methods > Press Volume buttons to > Choose "Take pictures or record video".
- Nivell de bateria: Assegureu-vos que la bateria no estigui esgotada.
6. Especificacions
| Número de model | ATYK179 |
| Dimensions del producte | 48.5 mm x 33.7 mm x 12.5 mm (1.89 x 1.18 x 0.39 polzades) |
| Pes de l'article | 1.41 unces (aprox. 40 g) |
| Versió Bluetooth | 5.2 |
| abast sense fils | Fins a 10 metres (33 peus) |
| Tipus de bateria | CR2032 Lithium Button Battery (included) |
| Capacitat de la bateria | 210 mAh |
| Durada de la bateria | Over 20,000 photos |
| Dispositius compatibles | Most iOS (iPhone, iPad) and Android smartphones/tablets |
7. Garantia i Suport
7.1 Informació de la garantia
ATUMTEK offers a warranty for all its branded products when purchased through authorized channels. Please retain your proof of purchase for warranty claims.
7.2 Atenció al client
For further assistance, troubleshooting, or to provide feedback, please visit the official ATUMTEK store or contact customer service through the platform where you purchased the product.
Official ATUMTEK Store: ATUMTEK Store on Amazon
