xTool S1 40W Laser Cutter and Engraver User Manual

1. Introducció

This manual provides essential information for the safe and effective operation of your xTool S1 40W Laser Cutter and Engraver. The xTool S1 is a powerful and versatile machine designed for precision cutting and engraving on a wide range of materials, offering advanced features like Pin-point Positioning and AutoPassthrough Technology.

Figure 1: xTool S1 40W Laser Cutter and Engraver with included accessories.

2. Informació de seguretat

WARNING: Laser radiation can cause eye and skin damage. Always follow safety guidelines.

The xTool S1 is designed with Class 1 safety features to ensure a secure operating environment. These features include:

• Enclosed Design: The fully enclosed structure helps contain laser light, smoke, and noise.
• Funda protectora: Filters 99% of laser light, eliminating the need for external goggles during operation.
• Flame Sensors: Built-in 5-direction flame sensors automatically halt operation if a flame is detected.
• Botó d'aturada d'emergència: Proporciona una aturada immediata en cas d'emergència.
• Topall de seguretat en obertura de la tapa: Automatically stops the laser if the lid is opened during operation.

Figura 2: Mésview of xTool S1's Class 1 safety features.

Ensure proper ventilation when operating the machine, especially when engraving materials that produce fumes. Consider using an air assist system or smoke purifier for optimal air quality.

Video 1: "Create Boldly, Protect Wisely" - Demonstrates the safety features of the xTool S1.

3. Configuració

The xTool S1 is designed for ease of use, often ready out of the box. Follow these general steps for initial setup:

1. Unboxing: Traieu amb cura la màquina i tots els accessoris de l'embalatge. Conserveu l'embalatge per a futurs transports o emmagatzematge.
2. Col·locació: Place the xTool S1 on a stable, level surface with adequate space around it for ventilation and operation.
3. Connexió d'alimentació: Connecteu l'adaptador de corrent a la màquina i a una presa de corrent adequada.
4. Instal·lació de programari: Download and install the xTool Creative Space (XCS) software from the official xTool weblloc.
5. Actualització del firmware: Before first use, connect the machine to your computer via USB and check for firmware updates within XCS. It is strongly recommended to use USB for the initial firmware upgrade.

Video 2: "Unbox xTool S1 Section 2 Riser Base" - Demonstrates the assembly of the riser base for the xTool S1.

For detailed instructions on assembling the riser base or other accessories, refer to the specific guides provided with those components or the official xTool support resources.

4. Instruccions de funcionament

4.1 Basic Operation with XCS Software

1. Col·locació del material: Place your material on the honeycomb panel inside the machine.
2. Enfocament automàtic: Move the laser module above the material and click the focusing button in XCS to automatically set the focal length.
3. Measure Processing Area: Use the "Measure" function to define the working area by marking the top-left and bottom-right coordinates of your material.
4. Design & Parameter Setting: Import or create your design in XCS. Select the appropriate material type and adjust parameters (power, speed, passes) based on the material and desired effect (score, engrave, cut). XCS offers preset parameters for over 400 materials.
5. Enquadrament: Use the "Framing" function to preview the laser path on your material before starting the process.
6. Comença el processament: Un cop satisfet amb la preview, click "Start" in XCS and press the button on the machine to begin processing.

Video 3: "xTool Creative Space-Software designed for xTool machines" - A guide to using the XCS software for your first project.

4.2 Engraving Curved Surfaces

The xTool S1 supports 3D curve engraving. To engrave on curved surfaces like tumblers or plates:

1. Preparació del material: Ensure your curved material is stable and properly positioned. For plates, use a specially cut foam to secure it.
2. Select Curve Process: In XCS, select the "Curve process" mode.
3. Curve Measurement: Use the "Curve-measure" function. Move the laser module to mark the upper-left and bottom-right vertices of the processing area. The software will then measure the surface curvature.
4. Adjust Model: After measurement, XCS generates a 3D model of the surface. You can adjust smoothness and tension for optimal results.
5. Procés: Place your design and start the engraving process as usual.

Video 4: "How to engrave curved surface" - Detailed steps for setting up and engraving on non-flat materials.

4.3 Using the Rotary Attachment

For cylindrical objects like tumblers, the optional rotary attachment (RA2 Pro) is essential:

1. Install Rotary Attachment: Place the rotary attachment on the baseplate of the xTool S1.
2. Connectar: Connect the rotary attachment to the xTool S1 using the provided cable.
3. Material de la posició: Secure your cylindrical material (e.g., tumbler) onto the rotary attachment.
4. Enfocament automàtic: Move the laser module to position the locating spot at the highest point of the material and initiate auto-focus.
5. Procés: Close the lid and start the engraving process from XCS.

Video 5: "How to use rotary attachment" - Demonstrates the setup and use of the rotary attachment for cylindrical engraving.

5. Manteniment

Regular maintenance ensures optimal performance and longevity of your xTool S1:

• Neteja de lents: Netegeu periòdicament la lent del làser amb un drap suau i sense borrissol i una solució netejadora de lents per mantenir la qualitat del gravat.
• Honeycomb Panel Cleaning: Remove debris and residue from the honeycomb panel regularly to prevent buildup and ensure proper material support.
• Lubricació de carrils: Apply a small amount of lubricant to the guide rails as recommended by the manufacturer to ensure smooth movement of the laser module.
• Actualitzacions de programari: Keep your XCS software and machine firmware updated to benefit from the latest features and improvements.

6. Solució De Problemes

For common issues and solutions, refer to the official xTool Troubleshooting Guide (PDF) available for download. Some general tips include:

• Problemes de connexió: Ensure USB cables are securely connected and Wi-Fi is stable. Restarting both the machine and software can often resolve connectivity problems.
• Qualitat del gravat: Check focal length, material parameters (power, speed, passes), and ensure the material surface is clean and flat (unless using curve engraving).
• Parades de seguretat: If the machine stops unexpectedly, check for open lids, flame sensor activation, or emergency stop button engagement. Address the cause before resuming.

If problems persist, contact xTool customer support for assistance. You can find contact information on the xTool website or within the XCS software.

7. Especificacions

Table 1: Key Specifications of the xTool S1 40W Laser Cutter and Engraver.

8. Garantia i Suport

xTool products typically come with a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official xTool weblloc.

For customer support, technical assistance, or to join the community, xTool offers multiple channels:

• Suport per correu electrònic
• Xat en directe
• Suport telefònic
• Grup de Facebook: Join the official xTool Facebook group for community support and tips.

Figure 3: xTool Multi-Channel Service Options.