1. Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your SHARP KD-NHA7S7PW21-DE heat pump tumble dryer. Please read these instructions carefully before using the appliance and keep them for future reference.
Figura 1.1: Davant view of the SHARP KD-NHA7S7PW21-DE heat pump tumble dryer. This image shows the appliance's overall design, including the control panel, door, and ventilation grille.
2. Informació de seguretat
Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions.
- Assegureu-vos que l'aparell estigui ben connectat a terra.
- Do not allow children to play with or operate the dryer.
- Never dry items that have been soiled with flammable substances.
- Netegeu el filtre de pelussa després de cada cicle.
- No bloquejar les obertures de ventilació.
- Desendolleu l'aparell abans de netejar-lo o fer-ne el manteniment.
3. Configuració i instal·lació
3.1 Desembalatge
Carefully remove all packaging materials. Inspect the dryer for any damage incurred during transit. Report any damage to your retailer immediately.
3.2 Col·locació
Place the dryer on a firm, level floor. Ensure there is adequate ventilation around the appliance. Do not install the dryer in a room where the temperature is likely to fall below 5°C, as this may affect its performance.
3.3 Connexió elèctrica
Connect the dryer to a dedicated 220V power outlet. Do not use extension cords or multiple socket adapters. Ensure the plug is easily accessible after installation.
3.4 Drenatge de condensats
This heat pump dryer collects water in a condensate tank. Ensure the tank is correctly seated. For continuous drainage, a drain hose can be connected to a suitable waste pipe (refer to the full installation guide for detailed instructions).
4. Instruccions de funcionament
4.1 Càrrega de la roba
Open the dryer door and load laundry into the drum. Do not overload the dryer; ensure clothes can tumble freely. Close the door firmly.
Figura 4.1: The dryer door open, revealing the stainless steel drum. This view is useful for understanding how to load and unload laundry.
4.2 Tauler de control acabatview
The control panel allows you to select programs and adjust settings.
Figura 4.2: Detallada view of the digital control panel. It features a display, 'Start/Pause' button, and indicators for functions like anti-crease and drying level.
4.3 Selecció de programes
Turn the program dial to select the desired drying program based on fabric type and desired dryness level.
Figura 4.3: Close-up of the program selection dial with various drying options such as 'Extra Dry', 'Cupboard Dry', 'Iron Dry', 'Delicates', 'Jeans', and timed programs.
4.4 Inici d'un cicle
After selecting a program, press the 'Start/Pause' button to begin the drying cycle. The display will show the remaining time.
4.5 Fi de cicle
L'assecadora indicarà quan el cicle s'hagi completat. Traieu la roba immediatament per minimitzar les cremes.asing. Clean the lint filter and empty the condensate tank after each use.
5. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de l'assecadora.
5.1 Neteja del filtre de borrissol
The lint filter is located inside the door opening. Pull it out and remove any accumulated lint. Rinse under running water if necessary and ensure it is completely dry before reinserting.
5.2 Buidatge del dipòsit de condensats
The condensate tank collects water extracted from the laundry. Empty it after every drying cycle. Pull out the tank, pour out the water, and reinsert it securely.
5.3 Neteja del condensador
The condenser should be cleaned periodically (e.g., every few months) to maintain drying efficiency. Refer to the full user manual for specific instructions on accessing and cleaning the condenser unit.
5.4 Neteja exterior
Netegeu l'exterior de l'assecadora amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
6. Solució De Problemes
If you encounter problems with your dryer, consult the following table before contacting service.
| Problema | Causa possible | Solució |
|---|---|---|
| L'assecador no s'engega | No power supply; Door not closed; Program not selected. | Check power plug and fuse; Close door firmly; Select a program and press Start. |
| La roba no s'asseca correctament | Lint filter blocked; Condenser dirty; Overloaded; Incorrect program. | Clean lint filter; Clean condenser; Reduce load size; Select appropriate program. |
| Indicador de dipòsit d'aigua ple encès | El dipòsit de condensats està ple. | Buidar el dipòsit de condensats. |
7. Especificacions
Key technical specifications for the SHARP KD-NHA7S7PW21-DE heat pump tumble dryer.
Figura 7.1: Technical data sheet providing detailed specifications and energy information for the appliance.
| Característica | Valor |
|---|---|
| Número de model | KD-NHA7S7PW21-DE |
| Tipus | Electric Condenser Heat Pump Tumble Dryer |
| Capacitat | 7.0 quilos |
| Dimensions (L x A x A) | 52.5 x 59.6 x 84.5 cm |
| Pes | 41.4 quilos |
| Nivell de soroll | 65 decibels |
| Voltage | 220 Volts |
| Classe d'eficiència energètica | E |
| Consum d'energia (per 100 cicles) | 114 kWh |
| Classe d'eficiència de condensació | D |
| Standard Program Duration | 2:58 |
| Enllaç de la base de dades EPREL | https://eprel.ec.europa.eu/qr/2245344 |
Figura 7.2: The energy label for the SHARP KD-NHA7S7PW21-DE, indicating its energy efficiency class, consumption, noise level, and capacity.
8. Garantia i Suport
Your SHARP KD-NHA7S7PW21-DE tumble dryer comes with a manufacturer's warranty. The minimum duration of the guarantee offered by the supplier is 24 months.
For warranty claims, technical support, or spare parts information, please contact SHARP customer service or visit their official weblloc:
- Atenció al client: https://sharphome.eu/pages/contact
- Spare Parts Information: https://sharphome.eu/pages/contact
Please have your model number (KD-NHA7S7PW21-DE) and purchase date available when contacting support.
