Introducció
Thank you for choosing EUGAD Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Designed for comfort and stability, these stools feature a high-resilience velvet upholstery and a robust metal frame, making them suitable for various settings such as bars, kitchen islands, and bistros. Please read this manual thoroughly before assembly and retain it for future reference.
Informació de seguretat
To ensure your safety and prolong the life of your EUGAD Bar Stools, please adhere to the following guidelines:
- Capacitat de càrrega màxima: Do not exceed the recommended maximum load of 150 kg (approximately 330 lbs) per stool. Overloading can lead to instability and damage.
- Muntatge requerit: Proper assembly is crucial for the stability and safety of the product. Ensure all components are correctly installed and tightened according to the instructions.
- Comprovacions periòdiques: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Superfície estable: Col·loqueu sempre els tamborets de bar sobre una superfície plana, estable i anivellada per evitar que bolquin.
- Evitar estar dret: Do not stand on the bar stools. They are designed for seating only.
- Nens i animals de companyia: Mantingueu els nens i les mascotes allunyats del producte durant el muntatge.
- Neteja: Use only recommended cleaning agents and methods to avoid damaging the velvet fabric or metal frame.
Contingut del paquet
Before beginning assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- Seat (with velvet upholstery and backrest)
- Legs (4 per stool, metal)
- Footrest bars (2 per stool, metal)
- Assembly hardware (screws, washers, Allen key)
- Coixinets antilliscants per als peus
- Manual d'instruccions (aquest document)
Figura 1: Explotat view of bar stool components.
Muntatge i muntatge
Assembly of the EUGAD Bar Stools is designed to be straightforward. Follow these steps carefully:
- Prepara la zona: Clear a spacious, clean, and soft area to prevent scratching the stool components or your floor during assembly.
- Fixar les potes al seient: Carefully align the top ends of the four legs with the pre-drilled holes on the underside of the seat. Secure them using the provided screws and washers. Do not fully tighten the screws at this stage.
Figure 2: Attaching the legs to the seat base.
- Install Footrest Bars: Connect the two footrest bars between the legs. Ensure they are correctly oriented to form a stable square or rectangular base. Use the remaining screws to secure them. Again, do not fully tighten yet.
Figure 3: Securing the footrest bars.
- Premeu tots els cargols: Once all components are loosely assembled, place the stool upright on a flat surface. Apply gentle pressure to ensure it is level, then systematically tighten all screws using the provided Allen key. Ensure all connections are firm and secure.
- Attach Anti-slip Pads: Press the anti-slip foot pads onto the bottom of each leg. These pads protect your floor and reduce noise.
Figure 4: Anti-slip foot pad detail.
- Comprovació final: Gently rock the stool to ensure it is stable and does not wobble. If it wobbles, re-check all connections and retighten as needed.
Ús
The EUGAD Bar Stools are designed for versatile use and comfort:
- Disseny ergonòmic: The curved backrest and seat are shaped to conform to the natural curves of your back and hips, providing comfortable support for extended periods.
- Reposall: Utilize the integrated footrest to relax your legs and maintain a comfortable posture.
- Col·locació versàtil: These stools are ideal for kitchen islands, home bars, dining areas, bistros, or any counter-height surface.
Figure 5: Bar stools in a kitchen setting.
Figura 6: Frontal view of the EUGAD Bar Stools.
Manteniment
Proper care will help maintain the appearance and longevity of your bar stools:
- Cleaning Velvet: For light dust, use a soft brush or vacuum cleaner with an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first. Do not rub vigorously.
- Cleaning Metal Frame: Wipe the metal legs and footrest with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Dry thoroughly to prevent rust.
- Eviteu la llum solar directa: Prolonged exposure to direct sunlight can cause the velvet fabric to fade.
- Calor i humitat: Keep the stools away from direct heat sources and excessive moisture.
- Inspecció periòdica: Periodically inspect all connections and retighten screws as needed to ensure continued stability.
Resolució de problemes
If you encounter any issues with your EUGAD Bar Stools, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Les femtes es mouen o són inestables. | Screws are not fully tightened; uneven floor; incorrect assembly. | Ensure all screws are tightened securely. Place the stool on a level surface. Disassemble and reassemble carefully, ensuring all parts are correctly aligned. |
| Sorolls de grinyols o cruixits. | Connexions fluixes; fricció entre peces metàl·liques. | Tighten all screws. If noise persists, apply a small amount of silicone lubricant to the joints where metal parts meet. |
| Foot pads falling off. | Instal·lació incorrecta; desgast. | Ensure pads are firmly pressed onto the leg ends. If damaged, replacement pads may be available from the manufacturer. |
| Velvet fabric appears flattened or matted. | Prolonged pressure; lack of care. | Gently brush the velvet with a soft-bristled brush in the direction of the pile. Avoid sitting in the exact same spot for extended periods. |
Especificacions
Key specifications for the EUGAD Bar Stools (Model: 1068BY-2):
- Marca: EUGAD
- Número de model: 1068BY-2
- Color: Negre
- Material: Velvet (upholstery), Metal (frame)
- Dimensions totals (L x A x A): 43.5 x 48.5 x 90 cm (aproximadament 17.1 x 19.1 x 35.4 polzades)
- Alçada del seient: 67 cm (aproximadament 26.4 polzades)
- Amplada del seient: 48.5 cm (aproximadament 19.1 polzades)
- Pes del producte: 13.82 kg (approximately 30.47 lbs) per pair
- Capacitat de càrrega màxima: 150 kg (aproximadament 330 lliures)
- Muntatge requerit: Sí
- Nombre de peces: 2 (per conjunt)
Figure 7: Product dimensions and load capacity.
Garantia i Suport
EUGAD is committed to providing high-quality products. For specific warranty details, please refer to the documentation included with your purchase or visit the official EUGAD website. If you require assistance with assembly, missing parts, or have any questions regarding your bar stools, please contact EUGAD customer support directly. Contact information can typically be found on the packaging or the brand's official online store.
Thank you for choosing EUGAD.
