Introducció
This manual provides essential information for the safe and effective use of the D60BV-12 12V 0.50A 4-Wire Cooling Fan. Please read this manual thoroughly before installation and operation.
Producte acabatview
The D60BV-12 is a 60x60x25mm 4-wire cooling fan designed for various electronic cooling applications. It operates on 12V DC and draws 0.50A of current.
Característiques clau
- Model: D60BV-12
- Voltage: 12V CC
- Corrent: 0.50 A
- Dimensions: 60x60x25mm (6CM)
- Connector: 4-Wire
- Mètode de refrigeració: Aire
- Material: coure
Contingut del paquet
- 1 x D60BV-12 Cooling Fan
Imatges del producte
Imatge 1: Part superior view of the D60BV-12 cooling fan, highlighting the fan blades and the central label displaying "D60BV-12", "12V", and "0.50A".
Imatge 2: Lateral view of the D60BV-12 cooling fan, illustrating its profile and the sturdy frame.
Imatge 3: Part inferior view of the D60BV-12 cooling fan, revealing the motor housing and the four corner mounting holes.
Imatge 4: Detallada view of the 4-pin power connector, showing the individual wires (red, black, yellow, blue) and their corresponding pins.
Image 5: Dimensional diagram of the D60BV-12 cooling fan, indicating its length (2.36"), width (0.98"), and height (2.36").
Informació de seguretat
Always observe the following safety precautions to prevent injury or damage to the fan or connected equipment.
- Assegureu-vos que la font d'alimentació coincideixi amb el volum del ventiladortage (12V DC) and current (0.50A) requirements.
- Disconnect power before installation, maintenance, or troubleshooting.
- Eviteu tocar les aspes del ventilador mentre el ventilador està en funcionament.
- Do not obstruct the fan's airflow.
- Install the fan in a dry environment, away from moisture and excessive heat.
- This fan is designed for cooling electronic components. Do not use it for purposes other than its intended use.
Configuració
Follow these steps for proper installation of the D60BV-12 cooling fan.
-
Prepareu la ubicació de muntatge: Identify a suitable location for the fan, ensuring adequate space for airflow and secure mounting. The fan dimensions are 60x60x25mm.
-
Muntar el ventilador: Secure the fan using appropriate screws through the four mounting holes located at each corner of the fan frame. Ensure the fan is firmly attached to prevent vibration.
-
Connectar l'alimentació: Connect the 4-wire power connector to a compatible 12V DC power source. Observe proper polarity:
- Red wire: Positive (+)
- Black wire: Negative (-) / Ground
- Yellow wire: Tachometer (RPM signal output)
- Blue wire: PWM (Pulse Width Modulation) control input
Ensure the connection is secure to prevent intermittent operation or damage.
-
Verify Airflow Direction: Before powering on, confirm the desired airflow direction. Most fans have an arrow indicating airflow direction on the side of the frame.
Instruccions de funcionament
Once the D60BV-12 cooling fan is properly installed and connected, operation is straightforward.
-
Encès: Apply 12V DC power to the connected power source. The fan should begin to rotate immediately.
-
Monitor de funcionament: Observe the fan to ensure it is spinning freely and quietly. Check for any unusual noises or vibrations.
-
PWM Control (Optional): If your system supports PWM control, you can adjust the fan speed by sending a PWM signal to the blue wire. Refer to your system's documentation for specific PWM signal requirements.
-
Tachometer Output (Optional): The yellow wire provides a tachometer signal, which can be used by your system to monitor the fan's rotational speed (RPM).
Manteniment
Regular maintenance helps ensure the longevity and optimal performance of your D60BV-12 cooling fan.
-
Eliminació de pols: Periodically inspect the fan blades and housing for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off before cleaning.
-
Comproveu les connexions: Occasionally verify that the power connections are secure and free from corrosion.
-
Escolta el soroll: Pay attention to any changes in fan noise. Increased noise or grinding sounds may indicate a failing bearing, requiring replacement.
-
Condicions ambientals: Ensure the fan operates within its specified temperature and humidity ranges to prevent premature wear.
Resolució de problemes
If you encounter issues with your D60BV-12 cooling fan, refer to the following common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no gira | No power, incorrect wiring, faulty fan | Check power supply (12V DC). Verify wiring connections (Red +, Black -). Test fan with a known good power source. |
| Fan spins slowly or intermittently | Vol insuficienttage/current, loose connection, dust buildup | Ensure power supply meets specifications. Secure all connections. Clean fan blades and motor housing. |
| Excés de soroll o vibració | Loose mounting, obstructed blades, worn bearing | Tighten mounting screws. Remove any obstructions. If noise persists, the fan bearing may be failing and require replacement. |
| PWM control not working | Incorrect PWM signal, faulty blue wire connection | Verify PWM signal specifications from your system. Check the integrity of the blue wire connection. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
Especificacions
| Atribut | Valor |
|---|---|
| Model | D60BV-12 |
| Voltage | 12V DC |
| Actual | 0.50A |
| Dimensions (L x A x A) | 2.36" x 0.98" x 2.36" (60 mm x 25 mm x 60 mm) |
| Tipus de connector d'alimentació | 4-pins |
| Mètode de refrigeració | Aire |
| Material | coure |
| Dispositius compatibles | Inverter (and other electronic components requiring cooling) |
| Fabricant | Jason L Terry |
| UPC | 782068176032 |
Garantia i Suport
For any questions or assistance regarding your D60BV-12 cooling fan, please contact the manufacturer or seller.
The seller states: "Please feel free to contact us if you have any questions. We will reply to you as soon as possible. We are happy to serve you."
Return Policy: The product has a 30-day refund/replacement return policy.
Manufacturer: Jason L Terry
Seller: Jason L Terry
For direct inquiries, please refer to the contact information provided at the point of purchase.
