Introducció
The EASYPIX BirdyCam is an innovative bird feeder equipped with an integrated camera system, designed to observe birds and other small animals in your garden without disturbance. Featuring automatic motion detection and solar power, it captures high-definition photos and videos, providing unique insights into local wildlife. This manual will guide you through the setup, operation, and maintenance of your BirdyCam.
Informació de seguretat
Atenció: Install and handle the BirdyCam with care. To ensure the well-being of wildlife, do not use food that could be harmful to them. Always follow these instructions for safe installation and operation, and comply with any local regulations regarding bird feeding.
Contingut del paquet
Before beginning, please verify that all components are present in your package:
- Bird Feeder with Integrated Camera
- Mounting Supports (e.g., strap, pole mount, mount adaptor)
- Cable USB
- Water Sink attachment
- Nectar Feeder attachment
- Manual d'usuari (aquest document)
Image: All components included with the EASYPIX BirdyCam.
Configuració
- Carregueu la bateria: The BirdyCam features a built-in lithium battery and a double solar panel for continuous power. For initial use or after prolonged storage, it is recommended to fully charge the device via the provided USB cable. Connect the USB cable to the camera's port and a suitable power source.
- Inseriu la targeta SD: Locate the SD card slot (typically near the camera controls). Insert a compatible SD card (not included) for storing photos and videos. Ensure it is inserted correctly until it clicks into place.
- Muntatge: Choose a suitable location in your garden, ensuring good sunlight exposure for the solar panels and a clear view of the area you wish to monitor. Use the provided mounting supports (strap, pole mount, or mount adaptor) to securely attach the BirdyCam. Ensure it is stable and out of reach of potential predators.
- Fill with Food and Water: Open the feeder compartments. Fill the main compartment with appropriate birdseed. Attach the water sink and nectar feeder if desired, and fill them with fresh water or nectar solution.
Imatge: Frontal view of the BirdyCam, highlighting food and water sections.
Image: The BirdyCam connected for USB charging.
Instruccions de funcionament
The BirdyCam is designed for automatic operation. Once set up, it will detect motion and capture media.
- Detecció automàtica de moviment: The device is equipped with a high-sensitivity PIR sensor that detects movement within a 3-meter radius. When motion is detected, the camera triggers automatically.
- Temps de desencadenament: The camera has a rapid trigger time of approximately 0.8 seconds, ensuring that fast-moving subjects are captured effectively.
- Modes de vídeo i foto: The BirdyCam can record HD video and take photos up to 12 MP resolution. You can typically configure the capture mode (photo, video, or photo+video) through the device's internal menu, accessible via the 1.44-inch (3.6 cm) display.
- ViewMitjans de comunicació: Captured photos and videos are stored on the inserted SD card. To view them, you can either connect the BirdyCam to a computer using the USB cable or remove the SD card and insert it into a card reader.
Image: Key features of the BirdyCam, including detection range and media capabilities.
Imatge: Examples of wildlife captured by the BirdyCam camera.
Image: Accessing recorded media via SD card or USB connection to a computer.
Manteniment
- Cleaning the Feeder: Regularly clean the food and water compartments to prevent mold and bacterial growth, which can be harmful to birds. Use mild soap and water, rinse thoroughly, and ensure it is completely dry before refilling.
- Neteja de plaques solars: Keep the solar panels clean and free of dirt, dust, and debris to ensure optimal charging efficiency. Gently wipe them with a soft, damp tela.
- Cura de la bateria: While the solar panels provide continuous power, during prolonged periods of bad weather or low sunlight, the integrated lithium battery may require recharging via the USB cable.
- Lent de la càmera: Periodically check and clean the camera lens to ensure clear image and video quality. Use a soft, lint-free cloth designed for optics.
Image: Steps for refilling the BirdyCam with food and water.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La càmera no grava ni fa fotos. | SD card full or not inserted correctly; low battery; motion sensor obstructed or faulty. | Check SD card, format if necessary, or replace. Charge battery via USB. Ensure clear line of sight for PIR sensor. |
| Mala qualitat d'imatge/vídeo. | Dirty lens; insufficient light; camera settings. | Clean the camera lens. Ensure adequate lighting. Check camera settings via the display. |
| La bateria no es carrega. | Solar panels dirty or obstructed; insufficient sunlight; faulty USB cable/port. | Clean solar panels. Relocate to an area with more direct sunlight. Try charging with a different USB cable or port. |
| Camera triggers too frequently without animals. | PIR sensor sensitivity too high; moving foliage or objects in detection zone. | Adjust PIR sensor sensitivity settings if available. Clear any moving branches or objects from the immediate detection area. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 10123 |
| Dimensions (L x A x A) | 10.5 x 11 x 17.3 cm |
| Pes | 350 grams |
| Font d'alimentació | Solar powered (Double Solar Panel) |
| Bateria | 1 bateria de liti-ió (inclosa) |
| Interval de detecció de moviment | Fins a 3 metres |
| Temps de desencadenament | 0.8 segons |
| Resolució de vídeo | Vídeo HD |
| Resolució fotogràfica | Fins a 12 MP |
| Mostra | 1.44 polzades (3.6 cm) |
| Característica especial | Resistent a la intempèrie |
| Tipus de muntatge | Muntatge suspès |
| Espècie objectiu | Ocell |
Image: Dimensions of the BirdyCam feeder.