1. Introducció
This instruction manual provides detailed guidance for the proper use and maintenance of your GLSOWEE OEC-T5 EL-50448 TPMS Relearn Tool. This device is designed to activate and reset Tire Pressure Monitoring System (TPMS) sensors in compatible vehicles, specifically GM, Cadillac, Buick, and Chevy models.
It is an essential tool for procedures such as tire pressure sensor replacement, tire pressure alarm removal, and tire rotation, ensuring your vehicle's TPMS operates correctly. The tool is engineered for ease of use, allowing for efficient sensor activation within minutes. Please read this manual thoroughly before operation to ensure safe and effective use.
Figure 1: GLSOWEE OEC-T5 EL-50448 TPMS Relearn Tool. This image shows the orange and black handheld device, highlighting its compact design.
2. Informació de seguretat
Always observe the following safety precautions when using the TPMS Relearn Tool:
- Ensure the vehicle is parked on a level surface with the parking brake engaged before beginning any TPMS relearn procedure.
- No feu servir l'eina en condicions humides ni a prop de líquids o gasos inflamables.
- Mantingueu l'eina lluny dels nens.
- Use only a 9V battery in good condition. Incorrect battery type or a depleted battery may affect performance.
- This tool is designed for passenger vehicles (cars, SUVs, pickup trucks) equipped with 315 or 433 MHz TPMS sensors. It is not suitable for heavy-duty trucks with more than 4 tires or vehicles with external TPMS.
- If the tool does not function as expected, refer to the troubleshooting section or contact support. Do not attempt to disassemble or repair the tool yourself.
3. Contingut del paquet
The package for the GLSOWEE OEC-T5 EL-50448 TPMS Relearn Tool includes:
- 1 x GLSOWEE OEC-T5 EL-50448 TPMS Relearn Tool
Nota: A 9V battery is required for operation and is no inclòs al paquet.
4. Especificacions
| Marca | GLSOWEE |
| Número de model | OEC-T5 EL-50448 |
| Dimensions (L x A x A) | 5.03 x 2.22 x 1.27 polzades (12.78 x 5.64 x 3.23 cm) |
| Pes de l'article | 4.2 unces (119 grams) |
| Font d'alimentació | Pila de 9V (no inclosa) |
| Temperatura de funcionament | 0 ~ 60 ° C (32 ~ 140 ° F) |
| Compatibilitat de freqüències | 315 MHz or 433 MHz TPMS sensors |
| Tipus de sortida | Pulsador |
| Usos específics | Automotive/Tire Servicing (TPMS Relearn) |
Figure 2: Product dimensions. This image illustrates the physical measurements of the GLSOWEE OEC-T5 EL-50448 tool, showing its length, width, and thickness.
5. Configuració
5.1 Instal·lació de la bateria
The GLSOWEE OEC-T5 EL-50448 TPMS Relearn Tool requires one 9V battery for operation.
- Locate the battery compartment on the back of the tool.
- Obriu la tapa del compartiment de la bateria.
- Insert a fresh 9V battery, ensuring correct polarity (+ and - terminals).
- Tanqueu bé la tapa del compartiment de la bateria.
A "LOW BAT" indicator light is present on the tool. If this light illuminates during use, replace the battery.
Figure 3: Tool components and battery compartment. This image points out the TX pilot light, low battery indicator, operation button, antenna, and the 9V battery compartment.
6. Instruccions de funcionament
Follow these steps to perform a TPMS relearn procedure using the GLSOWEE OEC-T5 EL-50448 tool. The process typically takes 1-2 minutes per tire.
- Pas 1: Prepareu el vehicle
Ensure your vehicle is in TPMS learning mode. This procedure varies by vehicle model; consult your vehicle's owner's manual for specific instructions on how to enter TPMS relearn mode. Typically, the car horn will sound twice to confirm entry into this mode. - Step 2: Start Relearn Process (Left Front Tire)
Begin the relearn process with the left front tire. Hold the GLSOWEE OEC-T5 EL-50448 tool against the tire sidewall, close to the valve stem. Ensure the tool's antenna is pointed towards the valve stem. - Step 3: Activate Sensor
Press and hold the operation button on the tool. Continue holding the button while keeping the tool against the tire sidewall until the car horn chirps once. This indicates successful activation of the sensor. - Step 4: Proceed to Next Tires
After the left front tire sensor is activated, move to the next tire in the following sequence:- Pneumàtic davanter dret
- Right Rear Tire
- Left Rear Tire
- Step 5: Complete Relearn
Once all four sensors have been activated in the correct sequence, the car horn will sound twice to confirm that the TPMS relearning process is complete.
Figure 4: Correct application steps. This diagram illustrates the sequential order for activating TPMS sensors: Left Front (A), Right Front (B), Right Rear (C), and Left Rear (D).
Figure 5: Application display. This image shows the tool being used on each of the four wheels (left-front, right-front, left-rear, right-rear) during the TPMS relearn process.
Figure 6: Signal transmission. This image depicts the tool activating a TPMS sensor with a single button press, indicating fast and strong signal transmission.
Notes importants:
- Different vehicles may require varying amounts of time to reset all tire sensors.
- If the tool does not work on the first attempt, try a few more times, ensuring the antenna is correctly positioned.
- The best location for the antenna is parallel to the valve stem on the tire sidewall. Avoid placing it directly on the valve stem or at an angle that is not parallel to the sidewall.
Figure 7: Effective use. This image demonstrates the correct placement of the tool's antenna parallel to the tire valve, and examples of invalid placements.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Tool does not activate sensor / Car horn does not chirp. |
|
|
| "LOW BAT" indicator light is on. | La bateria està baixa o esgotada. | Replace the 9V battery with a fresh one. |
| Tool activates some sensors but not all. |
|
|
8. Manteniment
- Keep the tool clean and dry. Wipe with a soft, damp drap si cal. No utilitzeu productes químics agressius ni netejadors abrasius.
- Store the tool in a cool, dry place, away from direct sunlight and extreme temperatures.
- Remove the 9V battery if the tool will not be used for an extended period to prevent battery leakage and damage.
- Inspect the tool periodically for any signs of damage. Do not use if damaged.
9. Garantia i assistència
For warranty information or technical support regarding your GLSOWEE OEC-T5 EL-50448 TPMS Relearn Tool, please refer to the documentation provided with your purchase or contact GLSOWEE customer service directly. Contact details can typically be found on the product packaging or the official GLSOWEE weblloc.
When contacting support, please have your product model number (OEC-T5 EL-50448) and purchase date available.
