Gota d'aigua WD-F19C

Manual d'instruccions del filtre d'aigua per a nevera Waterdrop WD-F19C

Model: WD-F19C

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Waterdrop WD-F19C Refrigerator Water Filter. Please read this manual thoroughly before installation and keep it for future reference.

1.1 Producte acabatview

The Waterdrop WD-F19C is a high-quality replacement water filter designed to provide clean, fresh-tasting water from your refrigerator. It utilizes an advanced Sri Lankan coconut shell carbon block for effective filtration.

Three Waterdrop WD-F19C refrigerator water filters in packaging.

Image 1.1: Waterdrop WD-F19C Refrigerator Water Filters

1.2 Compatibilitat

The Waterdrop WD-F19C filter is compatible with various GE refrigerator models that use RPWFE and RPWF filters. Compatible models include, but are not limited to:

  • GE RPWFE, RPWF
  • GFE28GBLTS, GFE28GGKWW, GFE28GGKBB, GFE28GSKSS
  • PFE28KMKES, PFE28KSKSS
  • GFD28GYNFS, GFD28GMLES, GFD28GBLTS
  • PWE23KYNFS, GYS22GMNES, GYS22GSNSS
  • GYE22HBLTS, GYE22HSKSS
  • DFE28JBLTS, DFE28JELDS, DFE28JMKES
  • GNE29GYNFS, GNE29GMKES, GNE29GGKWW

It also replaces WSG-4, DWF-36, WF277, R-3600, MPF15350, OPFG3-RF300, RWF1063, RWF3600A.

Waterdrop filter shown installed in a modern refrigerator.

Image 1.2: Waterdrop WD-F19C filter in a refrigerator

2. Informació de seguretat

Si us plau, observeu les precaucions de seguretat següents:

  • No l'utilitzeu amb aigua microbiològicament insegura o de qualitat desconeguda sense una desinfecció adequada abans o després del sistema.
  • Ensure the filter is installed correctly to prevent leaks.
  • Replace the filter every 6 months or 300 gallons, whichever comes first, to maintain optimal filtration performance and prevent potential health risks from expired filters.
  • Keep the filter out of reach of children.

3. Guia d'instal·lació

3.1 Abans de començar

  • Locate your refrigerator's water filter compartment, typically inside the fresh food section on the top right.
  • Have a towel ready to catch any drips.
  • No calen eines per a la instal·lació.

3.2 Passos d'instal·lació

  1. Traieu el filtre antic: Open the filter cover by pushing in on the tab. Pull the old filter straight out and discard it. Some water may drip, which is normal.
  2. Hand pulling out an old refrigerator water filter.

    Image 3.1: Removing the old filter

  3. Prepareu el filtre nou: Traieu la tapa protectora del nou filtre Waterdrop WD-F19C.
  4. Inseriu el filtre nou: Align the new filter with the filter housing. Push the filter straight in until it stops.
  5. Hand inserting a new Waterdrop refrigerator water filter into the housing.

    Image 3.2: Inserting the new filter

  6. Lock the Filter: Close the filter cover. You may need to push firmly until it clicks into place.
  7. Hand twisting a new Waterdrop refrigerator water filter to lock it into place.

    Image 3.3: Locking the filter

  8. Netegeu el sistema: Dispense about 2.5 gallons (10 liters) of water through the dispenser to flush the system and remove any air or carbon fines. This usually takes about 5 minutes.
  9. Restableix l'indicador del filtre: Refer to Section 5.2 for instructions on resetting your refrigerator's filter indicator light.

4. Funcionament

Once installed, the Waterdrop WD-F19C filter operates automatically as water flows through your refrigerator's dispenser or ice maker. The filter's multi-stage filtration process works to reduce various impurities:

  • Filtració avançada: The filter utilizes a Sri Lankan coconut shell carbon block, which has a larger surface area and more micropores than traditional charcoal filters.
  • Impurity Reduction: It is designed to efficiently reduce chlorine, taste, odor, large particles, suspended solids, sediment, and other impurities.
  • PFOA & PFOS Reduction: The filter also targets the reduction of PFOA and PFOS compounds.
  • Beneficial Minerals: While filtering out unwanted substances, the filter is designed to retain beneficial minerals in your water.
Diagram illustrating the multi-layer filtration process of the Waterdrop filter, showing reduction of chlorine, taste & odor, particles, PFOA, PFOS, and sediment.

Image 4.1: Multi-layer filtration process

Diagram showing water flowing through an activated carbon block, highlighting its ability to improve taste.

Image 4.2: Activated carbon block for improved taste

5. Manteniment

5.1 Calendari de substitució de filtres

For optimal performance and water quality, it is recommended to replace your Waterdrop WD-F19C filter every 6 months or after filtering 300 gallons (1137 liters), whichever comes first. The filter comes with complimentary month install stickers to help you track its service life.

5.2 Resetting the Filter Indicator Light

After replacing the filter, you must reset the filter indicator light on your refrigerator. The exact method may vary slightly by refrigerator model, but a common procedure for compatible GE models is:

  • Locate the "Water" button on your refrigerator's dispenser panel.
  • Press and hold the "Water" button for 3 segons.
  • You should hear a tone confirming that the dispenser has been reset, and the "Replace Water Filter" light will turn off.

If this method does not work, consult your refrigerator's owner's manual for specific instructions on resetting the filter indicator.

6. Solució De Problemes

Aquí teniu solucions a problemes comuns que podeu trobar:

  • Issue: Water dispenser not working or slow water flow after filter replacement.
    Solució: Ensure the filter is fully inserted and locked into place. Flush the system by dispensing at least 2.5 gallons of water to remove trapped air.
  • Issue: "Replace Water Filter" light remains on after replacement.
    Solució: Follow the instructions in Section 5.2 to manually reset the filter indicator light. If it still doesn't reset, consult your refrigerator's manual.
  • Issue: Water tastes unusual after filter replacement.
    Solució: This can happen with new carbon filters. Flush the system thoroughly by dispensing several gallons of water. The taste should normalize after flushing.
  • Issue: Water leakage from the filter area.
    Solució: Remove the filter and re-insert it, ensuring it is properly aligned and fully locked. Check the O-rings on the filter for any damage. If leakage persists, contact customer support.

7. Especificacions del producte

CaracterísticaDetall
Número de modelWD-F19C
MaterialMaterial sense plom, material de qualitat alimentària, bloc de carbó de coco activat avançat
Dimensions del producte5.51 "P x 1.97" W x 9.84" H
Certificació de proves externesNSF 42 i 372
Beneficis del producteGood compatibility, Deep filtration, Fresh-tasting water, Easy to install, No leaks
Vida útil del filtre6 mesos o 300 galons
Pes de l'article1.41 lliures
A scientist examining samples under a microscope, with a large NSF certification logo and text explaining NSF/ANSI Standard 42 and 372.

Image 7.1: NSF/ANSI Certification details

8. Garantia i Suport

For any questions, concerns, or support regarding your Waterdrop WD-F19C Refrigerator Water Filter, please contact Waterdrop customer service. While specific warranty details are not provided in this manual, Waterdrop products typically come with customer satisfaction guarantees. Please refer to the product packaging or the official Waterdrop weblloc web per obtenir la informació sobre la garantia i les dades de contacte més actualitzades.

Informació de contacte:
Please visit the official Waterdrop website or contact their customer support directly for assistance.

Documents relacionats - WD-F19C

Preview Guia d'instal·lació de substitució del filtre Waterdrop WD-F1/WD-FIA
Instruccions pas a pas per instal·lar els filtres de recanvi Waterdrop WD-F1 i WD-FIA per a sistemes d'osmosi inversa de la sèrie X. Inclou la vida útil del filtre, consells de manteniment, preguntes freqüents i advertències.
Preview Guia de substitució del filtre del sistema d'osmosi inversa Waterdrop Sèrie X
Instruccions pas a pas per substituir el filtre del sistema d'osmosi inversa Waterdrop X Series (models WD-X8, WD-X10, WD-X12, WD-X14, WD-X16). Inclou la instal·lació, el manteniment i les preguntes freqüents.
Preview Guia d'instal·lació del filtre de recanvi Waterdrop WD-F1/WD-FIA
Instruccions pas a pas per instal·lar el filtre de recanvi Waterdrop WD-F1/WD-FIA per als sistemes d'osmosi inversa Waterdrop sèrie X. Inclou la vida útil del filtre, l'emmagatzematge, el manteniment i les preguntes freqüents.
Preview Sistema de filtració d'aigua per a sobretaula Waterdrop Flash: Manual d'instruccions
Manual d'instruccions complet per al sistema de filtració d'aigua de sobretaula Waterdrop Flash (model WD-ED01AW / WD-ED01AB). Cobreix les pautes d'instal·lació, funcionament, manteniment, resolució de problemes i seguretat per a una purificació òptima de l'aigua.
Preview Waterdrop WD-CIRFG Replacement Filter Installation Guide
Installation manual for the Waterdrop WD-CIRFG replacement filter for countertop reverse osmosis water dispensers. Includes filter replacement steps, maintenance tips, and troubleshooting FAQs.
Preview Instruccions d'instal·lació del filtre de recanvi Waterdrop WD-G3-CF
Instruccions detallades per instal·lar el filtre de recanvi Waterdrop WD-G3-CF per al sistema de filtració d'aigua per osmosi inversa Waterdrop. Inclou els passos, el manteniment i la resolució de problemes.