Waterdrop WD-F19C

Manual d'instruccions del filtre d'aigua per a nevera Waterdrop WD-F19C

Model: WD-F19C

Introducció

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Waterdrop WD-F19C Refrigerator Water Filter. Please read these instructions carefully before use to ensure optimal performance and longevity of your filter.

The Waterdrop WD-F19C filter is designed to provide clean, fresh-tasting water by reducing various impurities. It is certified by NSF International against NSF/ANSI Standard 42 for the reduction of claims specified on the Performance Data Sheet, and to NSF/ANSI 372 for lead-free materials.

Two Waterdrop WD-F19C refrigerator water filters.

Image: Two Waterdrop WD-F19C replacement water filters, showing product labeling and design.

Instruccions d'instal·lació

The Waterdrop WD-F19C refrigerator water filter is designed for easy, tool-free installation. Follow these steps to replace your old filter with the new one:

  1. Locate your refrigerator's water filter compartment. This is typically found inside the refrigerator, often in the upper right corner or in the base grille.
  2. Twist the old filter counter-clockwise to unlock it, then pull it straight out. Some water may drip, so have a towel ready.
  3. Remove the protective cap from the new Waterdrop WD-F19C filter.
  4. Insert the new filter into the housing, aligning the arrow on the filter with the arrow on the filter housing.
  5. Push the filter firmly into the housing and twist it clockwise until it locks into place. You should feel a click or resistance.
  6. Flush the new filter by dispensing approximately 2-3 gallons of water through the refrigerator's dispenser. This removes air and carbon fines from the system.
  7. Reset the 'Replace Water Filter' indicator light on your refrigerator, if applicable. Refer to the 'Troubleshooting' section for specific instructions.
Waterdrop WD-F19C filter shown installed in a compatible refrigerator.

Image: The Waterdrop WD-F19C filter positioned within a refrigerator's filter compartment, demonstrating its ideal fit.

Operating Principles and Filtration

The Waterdrop WD-F19C filter utilizes an advanced Sri Lankan coconut shell carbon block for effective filtration. This material offers a larger surface area and more micropores compared to traditional charcoal filters, enhancing its ability to capture impurities.

The filtration process efficiently reduces various substances from your drinking water, including chlorine, taste, odor, large particles, suspended solids, PFOA, PFOS, and sediment. While these impurities are reduced, beneficial minerals in your water are retained. The filter's design also ensures a good fit, preventing leakages and maintaining a high flow rate for consistent water dispensing.

Diagram illustrating the leak-proof design, easy replacement, and high flow rate features of the Waterdrop filter.

Image: A visual representation highlighting the leak-proof design, ease of replacement, and high flow rate of the Waterdrop filter.

Diagram illustrating the multi-stage filtration process, showing reduction of chlorine, taste, odor, large particles, suspended solids, PFOA, PFOS, sediment, and other impurities.

Image: An infographic detailing the various impurities reduced by the filter, such as chlorine, taste, odor, PFOA, PFOS, and sediment.

Graphic explaining the reduction of PFOA and PFOS by the Waterdrop filter, with potential health effects of these chemicals.

Image: A graphic explaining how the Waterdrop filter reduces PFOA and PFOS, also known as 'Forever Chemicals', for safer drinking water.

Cross-section diagram of the filter's activated carbon block, highlighting premium material, patented filter, and food-grade components for high-efficiency filtration.

Image: A detailed cross-section view of the filter's premium activated carbon block, emphasizing its role in improving water taste through high-efficiency filtration.

Manteniment i substitució de filtres

For optimal performance and water quality, it is recommended to replace your Waterdrop WD-F19C filter every 6 months or after filtering 300 gallons of water, whichever comes first. The filter is shipped with complimentary month install stickers to help you track its service life.

Resetting the Filter Indicator Light

After replacing the filter, if the 'Replace Water Filter' light on your refrigerator does not automatically reset, you may need to manually reset it. For most compatible GE refrigerators, hold down the 'Water' button for 3 seconds. This action should produce a tone, confirming that the dispenser has been reset and the indicator light is off.

A family smiling and drinking water, with an overlay indicating a 6-month filter lifespan, promoting eco-conscious consumption.

Image: A family enjoying clean water, illustrating the recommended 6-month lifespan of the filter.

Resolució de problemes

El llum indicador del filtre roman encès després de la substitució

If the 'Replace Water Filter' indicator light on your refrigerator remains illuminated after installing a new Waterdrop WD-F19C filter, it typically requires a manual reset. Please refer to the 'Resetting the Filter Indicator Light' instructions in the Maintenance section above. If the issue persists after attempting the reset, consult your refrigerator's user manual for specific model instructions or contact customer support.

Flux d'aigua reduït

A reduction in water flow from your dispenser can indicate a clogged filter. If your filter is nearing its 6-month lifespan or 300-gallon capacity, it is likely time for a replacement. Ensure the new filter is properly seated and twisted into place as per the installation instructions.

Fuga d'aigua

If you experience water leakage after installation, ensure the filter is fully inserted and twisted clockwise until it is securely locked. The Waterdrop filter is designed for a good fit to prevent leaks. If leakage continues, remove and re-install the filter carefully. If the problem persists, contact customer support.

Especificacions

Número de modelWD-F19C
MarcaGota d'aigua
MaterialLead-Free Material, Food-Grade Material, Advanced Activated Coconut Carbon Block
Dimensions del producte3.74 "P x 1.97" W x 9.84" H
Certificació de proves externesNSF 42 & 372
Vida útil del filtre300 gallons or 6 months (whichever comes first)
Pes de l'article15.3 unces

Models de neveres compatibles:

Replacement for GE Filter Models:

Garantia i Suport

Waterdrop products are manufactured with high-quality, BPA-free, and food-grade materials, verified by NSF 372 certification for lead-free materials. We are committed to providing reliable and safe filtration solutions.

For any questions, concerns, or technical assistance, please contact Waterdrop customer support. Refer to the product packaging or the official Waterdrop weblloc web per obtenir informació de contacte i condicions detallades de la garantia.

Documents relacionats - WD-F19C

Preview Waterdrop WD-G3-CB Replacement Filter Installation Instructions
Step-by-step guide for installing the Waterdrop WD-G3-CB replacement filter for WD-G3 Series water filtration systems. Includes maintenance, FAQs, and performance data.
Preview Instruccions d'instal·lació del filtre de recanvi Waterdrop WD-G3P600-RO
Guia pas a pas per instal·lar el filtre de recanvi Waterdrop WD-G3P600-RO per al vostre sistema de filtració d'aigua per osmosi inversa Waterdrop. Inclou dades de rendiment, preguntes freqüents i advertències.
Preview Instruccions d'instal·lació del sistema de filtració d'aigua per a sota l'aigüera Waterdrop WD-UB
Guia d'instal·lació completa per al sistema de filtració d'aigua per a sota l'aigüera Waterdrop WD-UB Quick Connect. Inclou especificacions, instruccions pas a pas, preguntes freqüents sobre la resolució de problemes i dades de rendiment.
Preview Waterdrop WD-CTF-03 Faucet Filtration System User Manual
Comprehensive user manual for the Waterdrop WD-CTF-03 Countertop Stainless-Steel Faucet Filtration System, covering installation, usage, maintenance, troubleshooting, and warranty information.
Preview Waterdrop WD-G3-CF Replacement Filter Installation Instructions
Detailed instructions for installing the Waterdrop WD-G3-CF replacement filter for the Waterdrop Reverse Osmosis Water Filtration System. Includes steps, maintenance, and troubleshooting.
Preview Manual d'usuari del sistema de filtre d'aigua alimentat per gravetat Waterdrop King Tank
Comprehensive user manual for the Waterdrop King Tank Gravity-Fed Water Filter System. Includes product overview, parts list, specifications, step-by-step installation instructions, operation tips, maintenance guidelines, frequently asked questions, and warranty information.