Introducció
This manual provides essential information for the safe operation, maintenance, and troubleshooting of your Hover-1 Journey 2.0/Max Foldable Electric Scooter. Please read this manual thoroughly before operating the scooter to ensure your safety and the longevity of the product. Retain this manual for future reference.
Informació important de seguretat: Always wear a helmet and appropriate safety gear when riding. Ensure you understand local laws and regulations regarding electric scooter use. Do not ride under the influence of alcohol or drugs. Avoid riding in adverse weather conditions or on slippery surfaces.
Producte acabatview
Característiques clau
- Motor potent: Equipped with a 300W/700W Brushless Motor for efficient propulsion.
- Interval estès: Offers a range of 16-26 miles on a single charge, depending on model and conditions.
- Alta velocitat: Achieves a maximum speed of 15-19 mph.
- Air-Filled Tires: Features 8.5-inch pneumatic tires for a comfortable ride.
- Disseny plegable: Es plega còmodament per facilitar l'emmagatzematge i el transport.
- Frenada regenerativa: Enhances safety and battery efficiency.
- Pantalla digital: Provides real-time information on speed, battery level, and mode.
- Control de creuer: Maintains a consistent speed for relaxed riding.
Image: Key features of the Hover-1 Journey 2.0/Max Electric Scooter, highlighting the 300W Brushless Motor, 36V/6Ah Battery, 8.5" Pneumatic Tires, and Rear Disc Brake.
Image: Two Hover-1 electric scooters with riders, showcasing the sleek design and portability.
Configuració
Unboxing i muntatge
- Traieu amb cura tots els components de l'embalatge.
- Lift the handlebar stem to an upright position until it clicks securely into place.
- Attach the handlebars to the stem, ensuring they are firmly seated and tightened.
- Check all screws and fasteners to ensure they are tight before first use.
Càrrega inicial
- Localitzeu el port de càrrega del patinet.
- Connect the charger to the scooter's charging port, then plug the charger into a standard wall outlet.
- Allow the scooter to charge fully before its first use. The indicator light on the charger will typically change from red to green when charging is complete.
- Unplug the charger once charging is complete. Do not overcharge the battery.
Instruccions de funcionament
Controls i pantalla
- Botó d'encesa: Manteniu premut per activar/desactivar.
- Pantalla digital: Shows current speed, speed mode (High: 0-16 MPH, Low: 0-9 MPH), battery level, and headlight icon.
- Acceleració: Premeu cap avall per accelerar.
- Palanca de fre: Activates the regenerative braking system.
- Far: Can be toggled on/off via the display or a dedicated button (refer to specific model details).
- Control de creuer: Activates when holding the throttle down at a consistent speed above 3 MPH.
Image: Illustration of the scooter's digital display, showing speed modes, battery indicator, and cruise control functionality.
Conduint el Scooter
- Turn on the scooter by pressing and holding the power button.
- Place one foot firmly on the deck and use the other foot to push off the ground to gain initial momentum.
- Un cop en moviment, premeu suaument l'accelerador per accelerar.
- To slow down or stop, release the throttle and gently press the brake lever.
- Maintain balance and keep both hands on the handlebars at all times.
Plegat i desplegament
The Hover-1 Journey 2.0/Max features a convenient folding mechanism for portability.
- Per plegar: Ensure the scooter is powered off. Locate the folding latch mechanism near the base of the handlebar stem. Follow the instructions specific to your model to release the latch and fold the stem down until it locks into place.
- Per desplegar: Release the folding latch and lift the handlebar stem until it clicks securely into its upright riding position. Ensure the mechanism is fully engaged before riding.
Manteniment
Neteja general
- Netegeu el patinet amb anunciamp cloth after each use to remove dirt and dust.
- No utilitzeu productes químics ni productes de neteja abrasius.
- Eviteu ruixar aigua directament sobre els components elèctrics.
Cura dels pneumàtics
- Regularly check tire pressure and inflate to the recommended PSI (usually found on the tire sidewall or in specifications).
- Inspeccioneu els pneumàtics per detectar desgast, punxades o danys abans de cada viatge.
Cura de la bateria
- Charge the battery fully after each use, even if only partially discharged.
- Guardeu el patinet en un lloc fresc i sec quan no l'utilitzeu.
- If storing for an extended period, charge the battery to approximately 50-70% every 30-60 days to prevent deep discharge.
- Use only the official Hover-1 charger provided with your scooter.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El patinet no s'encén. | Bateria baixa; connexions fluixes; mal funcionament del botó d'engegada. | Charge the battery; check all connections; contact customer support if issue persists. |
| Abast o velocitat reduïts. | Low tire pressure; battery degradation; riding uphill frequently; heavy load. | Inflate tires to recommended PSI; ensure full charge; adjust riding habits. |
| Brakes feel weak or noisy. | Worn brake pads; misaligned brake components. | Inspect brake pads for wear and replace if necessary; have brakes adjusted by a qualified technician. |
| Sorolls inusuals durant el funcionament. | Components solts; restes a les rodes; problema amb el motor. | Check for loose parts and tighten; inspect wheels for obstructions; contact support if motor noise is persistent. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Hover-1 |
| Nom del model | H1-JNY2 (Journey 2.0/Max) |
| Motor | 300W/700W Brushless Motor |
| Velocitat màxima | 15-19 mph |
| Interval màxim | 16-26 milles |
| Tipus de roda | 8.5" Pneumatic (Air-Filled) |
| Límit de pes | 264 lliures |
| Material del marc | Alumini |
| Estil de fre | Frenatge regeneratiu |
| Característica especial | Plegable |
| Usos recomanats | Desplaçaments urbans, Equitació recreativa |
Garantia i Suport
The Hover-1 Journey 2.0/Max Electric Scooter comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions, including coverage duration and what is covered.
For technical support, replacement parts, or warranty claims, please contact Hover-1 customer service. Contact information can typically be found on the Hover-1 official weblloc web o a l'embalatge del producte.
