Manual d'usuari de la caixa forta biomètrica per a armes AEGIS PSZ-60

1. Introducció

This manual provides essential instructions for the safe and efficient operation of your AEGIS PSZ-60 Biometric Gun Safe. Please read this manual thoroughly before installation and use, and retain it for future reference. Proper understanding of these instructions will ensure optimal performance and security.

Image 1.1: The AEGIS PSZ-60 Biometric Gun Safe in a typical home environment.

2. Producte acabatview

The AEGIS PSZ-60 is a 3.7 cubic feet biometric security safe designed for quick access and secure storage of valuables. It features multiple access methods including fingerprint, digital keypad, and emergency keys, along with an anti-theft alarm system and silent mode functionality.

Imatge 2.1: Frontal view of the AEGIS PSZ-60 safe with the door open.

Image 2.2: Interior capacity of the safe with items.

Característiques principals:

• Biometric Fingerprint Access: Stores up to 20 fingerprints for rapid access (less than 0.5 seconds response time).
• Teclat digital: Customizable 3-8 digit password.
• Emergency Key Access: Two backup keys for manual override.
• Gran capacitat: 3.7 cubic feet interior with two removable shelves for flexible storage.
• Sistema antirobatori: Features 20mm solid locking bolts and an alarm that activates after 3 incorrect access attempts.
• Mode silenciós: Option to disable sound for discreet operation.
• Alimentació d'emergència: Type-C port for external power in case of battery depletion.
• Opcions de muntatge: Pre-drilled holes for secure floor or wall mounting.

3. Informació de seguretat

Please adhere to the following safety guidelines to prevent injury, damage, or unauthorized access:

• Always keep the emergency keys in a secure location, separate from the safe itself. Never store them inside the safe.
• Ensure batteries are installed correctly according to polarity markings.
• Test all access methods (fingerprint, password, key) after initial setup to confirm proper functionality.
• Mount the safe securely using the provided hardware to prevent unauthorized removal or tipping.
• Do not attempt to force the safe open if it is jammed or malfunctioning. Refer to the troubleshooting section or contact support.
• This safe is not water-resistant. Avoid exposure to water or high humidity.

4. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• AEGIS PSZ-60 Biometric Gun Safe (1)
• Claus d'emergència (2)
• Perns de muntatge (4)
• User Manual (This document) (1)
• Removable Shelves (2)

5. Configuració

5.1. Initial Power-Up and Battery Installation

1. Localitza el compartiment de la bateria, normalment a l'interior de la porta de la caixa forta.
2. Insert four (4) AA batteries (not included) into the compartment, ensuring correct polarity.
3. Close the battery compartment cover. The safe will emit a beep, indicating successful power-up.

5.2. Configuració de les empremtes dactilars

The safe can store up to 20 unique fingerprints. When no fingerprints are registered, any fingerprint can open the safe. Register at least one fingerprint immediately after initial setup for security.

Image 5.1: Fingerprint registration process.

1. With the safe door open, press the internal reset button (usually a small button inside the battery compartment or near the lock mechanism). The indicator light will flash.
2. Place your finger firmly on the fingerprint scanner. The light will flash green and beep once.
3. Lift your finger and place it again on the scanner from a slightly different angle. Repeat this process 4-5 times until the light turns solid green and a long beep is heard, indicating successful registration.
4. Per registrar empremtes dactilars addicionals, repetiu els passos 1-3 per a cada dit.
5. To delete all registered fingerprints, press and hold the reset button for approximately 5 seconds until a long beep is heard.

5.3. Setting Up Passcode

You can set a digital passcode between 3 and 8 digits.

Image 5.2: Digital keypad for password entry.

1. With the safe door open, press the internal reset button. The indicator light will flash.
2. Enter your desired 3-8 digit passcode on the keypad.
3. Press the '#' button to confirm. The light will turn solid green and a long beep will be heard, indicating successful passcode setup.
4. Test the new passcode with the door open before closing it.

5.4. Muntatge de la caixa forta

The safe can be securely mounted to a floor or wall using the pre-drilled holes and included mounting bolts.

Image 5.3: Wall or floor mounting instructions.

1. Choose a suitable location for mounting. Ensure the surface is solid and can support the weight of the safe and its contents.
2. Position the safe and mark the locations for the four pre-drilled anchor holes (two on the bottom, two on the back).
3. Perforeu forats pilot als llocs marcats.
4. Align the safe with the drilled holes and insert the mounting bolts. Tighten them securely.

6. Instruccions de funcionament

6.1. Desbloquejar la caixa forta

The AEGIS PSZ-60 offers four methods for quick access:

Imatge 6.1: acabatview of the four unlocking methods.

Method 1: Fingerprint Access

1. Place a registered finger firmly on the fingerprint scanner.
2. The indicator light will turn green, and a beep will sound.
3. En 5 segons, gireu el pom en sentit horari per obrir la porta de la caixa forta.

Method 2: Passcode Access

1. Enter your 3-8 digit passcode on the digital keypad.
2. Press the '#' button. The indicator light will turn green, and a beep will sound.
3. En 5 segons, gireu el pom en sentit horari per obrir la porta de la caixa forta.

Method 3: Emergency Key Access

This method is used if batteries are dead, you forget your passcode, or fingerprints are not recognized.

1. Locate the emergency keyhole, usually concealed behind a removable cover on the keypad panel.
2. Introduïu la clau d'emergència i gireu-la en sentit antihorari.
3. While holding the key turned, turn the main knob clockwise to open the safe door.
4. Remove the key after opening.

Method 4: Emergency Power with Type-C Port

If the internal batteries are completely depleted, you can use an external Type-C power source.

1. Connect a Type-C cable from an external power bank (not included) to the Type-C port on the safe's keypad panel.
2. Once powered, you can use either Fingerprint Access (Method 1) or Passcode Access (Method 2) to open the safe.
3. After opening, replace the internal batteries.

6.2. Tancament de la caixa forta

To lock the safe, simply close the door and turn the knob counter-clockwise until it clicks into place. The locking bolts will extend automatically.

6.3. Mode silenciós

The safe features a silent mode for discreet operation.

Image 6.2: Mute and Alarm Functionality.

• To activate Silent Mode: Press the '*' button on the keypad. A short beep confirms activation.
• To deactivate Silent Mode: Press the '*' button again. A short beep confirms deactivation.

6.4. Funció d'alarma

The safe is equipped with an anti-theft alarm system.

• If an incorrect fingerprint is scanned or an incorrect passcode is entered 3 consecutive times, the alarm will activate and beep for 30 seconds.
• To silence the alarm, use a correct fingerprint, passcode, or the emergency key to open the safe.

6.5. Ajust de les prestatgeries

The safe includes two removable shelves to customize the interior space.

Image 6.3: Flexible interior with removable shelves.

1. Obre la porta de la caixa forta.
2. Carefully lift and slide out the desired shelf from its supports.
3. To reinsert, align the shelf with the support brackets at the desired height and slide it into place.

7. Manteniment

7.1. Neteja

Netegeu l'exterior de la caixa forta amb un drap suau iamp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components. Do not spray cleaning solutions directly onto the keypad or fingerprint scanner.

7.2. Substitució de la bateria

When the batteries are low, the safe will typically indicate this with a specific light pattern or sound during operation. Replace all four AA batteries simultaneously to ensure consistent power. Refer to Section 5.1 for battery installation steps.

8. Solució De Problemes

If you encounter issues with your AEGIS PSZ-60 safe, refer to the following common problems and solutions:

9. Especificacions

Detailed technical specifications for the AEGIS PSZ-60 Biometric Gun Safe:

Image 9.1: Product dimensions of the AEGIS PSZ-60 safe.

10. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact AEGIS customer service directly. Contact details can typically be found on the manufacturer's official weblloc o embalatge del producte.

Please have your model number (PSZ-60) and purchase date available when contacting support.