Introducció
The Nerf Pro Sender is a high-performance, semi-automatic dart blaster designed for competitive play. It utilizes half-length darts for enhanced accuracy, distance, and velocity, reaching speeds up to 150 feet per second. This manual provides essential information for safe setup, operation, and maintenance of your blaster.
Informació de seguretat
ADVERTÈNCIA: Es poden generar peces petites. No apte per a nens menors de 3 anys.
This product is recommended for ages 14 and up. Always use the included eyewear to protect your eyes. Do not aim at eyes or face. Use only official Nerf Pro darts. Do not modify darts or blaster. Impact from darts may cause temporary marks on skin. Read instructions before use for important safety information.

Image: A person holding the Nerf Pro Sender blaster while wearing protective eyewear, emphasizing safety during use.
Què hi ha a la caixa
- Nerf Pro Sender Blaster
- 15-Dart Magazine
- 30 Nerf Pro Half-Length Darts
- Ulleres
- Instruccions (aquest manual)

Image: The Nerf Pro Sender blaster and its included accessories (magazine, darts, eyewear) displayed within its product packaging.
Configuració
1. Instal·lació de la bateria
The Nerf Pro Sender blaster requires 8x 1.5V AA alkaline batteries (not included).
- Locate the battery compartment on the underside of the blaster, near the magazine well.
- Desenrosqueu la tapa del compartiment de la bateria.
- Inseriu 8 piles AA, assegurant la polaritat correcta (+/-).
- Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.
2. Magazine Loading
The blaster comes with a 15-dart capacity magazine.
- Insert Nerf Pro half-length darts into the magazine, ensuring they are properly seated.
- Align the loaded magazine with the magazine well on the blaster.
- Push the magazine firmly into the well until it clicks into place.

Image: A hand demonstrating how to insert the 15-dart magazine into the Nerf Pro Sender blaster.
3. Eyewear
Always wear the included protective eyewear when operating the blaster.
Instruccions de funcionament
1. Powering On and Revving
To activate the blaster's motor, press and hold the rev trigger located below the main trigger. You will hear the motor spin up.

Image: A close-up of a hand pressing the rev trigger on the Nerf Pro Sender blaster, indicating the power-up action.
2. Llançar dards
While holding the rev trigger, pull the main firing trigger to launch a dart. The blaster features semi-automatic firing, meaning one dart is fired per trigger pull while the rev trigger is held.

Image: Two people demonstrating the firing of the Nerf Pro Sender blasters, showing darts in flight and the use of protective eyewear.
3. Bloqueig del disparador
The blaster is equipped with a trigger lock for safety. Engage the trigger lock when the blaster is not in use to prevent accidental firing.
4. Magazine Removal
To remove the magazine, press the magazine release button, typically located near the magazine well, and pull the magazine downwards.
Video: A short official product video demonstrating the Nerf Pro Sender blaster, including magazine insertion, revving, and firing actions.
Manteniment
Cura de dards
- Store darts properly to prevent bending or damage, which can affect performance and cause jams.
- Do not use damaged or modified darts.

Imatge: Un primer pla view of several Nerf Pro half-length darts, illustrating their design for accuracy and velocity.
Blaster Cleaning
- Netegeu el blaster amb un drap sec o lleugerament humit.amp drap per eliminar la pols i els residus.
- Ensure no moisture enters the battery compartment or internal mechanisms.
Emmagatzematge de la bateria
- Remove batteries from the blaster when not in use for extended periods to prevent leakage.
Resolució de problemes
Blaster Not Firing
- Comproveu si les piles estan correctament instal·lades i tenen prou càrrega. Substituïu-les si cal.
- Ensure the rev trigger is fully pressed before pulling the firing trigger.
- Verify the magazine is fully inserted and locked into place.
- Check if the trigger lock is disengaged.
Darts Not Firing Properly / Jams
- Ensure only official Nerf Pro half-length darts are used.
- Check darts for damage (bends, tears) and replace any compromised darts.
- Ensure darts are loaded correctly into the magazine without being squished.
- Inspect the dart path for any obstructions.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | G0355 |
| Tipus de blaster | Semi-Automatic Motorized Dart Blaster |
| Tipus de dard | Nerf Pro Half-Length Darts |
| Dart Velocity | Up to 150 feet per second (FPS) |
| Capacitat de la revista | 15 Dards |
| Piles necessàries | 8 piles alcalines AA d'1.5 V (no incloses) |
| Edat recomanada | 14 anys i més |
| Dimensions del producte | 2.64 x 17.99 x 10.51 polzades |
| Pes de l'article | 2.25 lliures |
Garantia i Suport
Per obtenir informació sobre la garantia i l'assistència al client, consulteu la pàgina oficial del fabricant. weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.





