1. Introducció
This manual provides essential information for the safe and effective use of your FLEX STACK PACK FS1105 3-Drawer Tool Box. Please read these instructions carefully before initial use and retain for future reference.
Figura 1: The FLEX STACK PACK FS1105 3-Drawer Tool Box. This image shows the grey and black tool box with three visible drawers and the FLEX STACK PACK branding.
2. Configuració i ús inicial
The FLEX STACK PACK FS1105 3-Drawer Tool Box is designed for immediate use with minimal setup. Upon unpacking, ensure all included components are present.
2.1 Components inclosos
- 1x FLEX STACK PACK FS1105 3-Drawer Tool Box
- 1x Onboard Security Bar
- 6x Long Dividers
- 18x Short Dividers
2.2 Installing Dividers
The drawers are equipped with slots for customizable organization using the included dividers.
- Open a drawer by lifting the handle and pulling it out.
- Insert the long and short dividers into the desired slots within the drawer to create compartments for your tools and supplies.
- Ensure dividers are securely seated to prevent movement.
Figura 2: A hand placing a removable divider into a drawer of the FLEX STACK PACK tool box, demonstrating the customizable organization feature for hardware and supplies.
3. Instruccions de funcionament
3.1 Funcionament del calaix
The tool box features auto-locking drawers and durable, rust-resistant rails for smooth operation.
- To open a drawer: Lift the drawer handle and pull the drawer outwards.
- To close a drawer: Push the drawer inwards until it clicks into place. The auto-locking mechanism will engage, preventing accidental opening during transport.
Figura 3: A close-up of a hand operating an auto-locking drawer. The image highlights the mechanism that prevents drawers from opening during transport.
3.2 Using the Onboard Security Bar
The onboard security bar provides an additional layer of protection against theft.
- Ensure all drawers are fully closed and locked.
- Position the security bar across the front of the drawers, aligning it with the designated slots on the sides of the tool box.
- Secure the bar with a padlock (not included) through the provided holes.
- When not in use, the security bar can be stowed in its designated storage area.
Figura 4: A hand attaching a padlock to the onboard security bar of the FLEX STACK PACK tool box, illustrating how to prevent theft.
3.3 STACK PACK System Connectivity
The FS1105 3-Drawer Tool Box is part of the FLEX STACK PACK system, allowing for quick and effortless connection with other compatible STACK PACK components.
- To stack: Align the quick-connect latches of the FS1105 with the corresponding connection points on another STACK PACK unit. Press down firmly until the latches engage.
- To unstack: Release the quick-connect latches and lift the unit.
Figura 5: A person connecting two FLEX STACK PACK units, demonstrating the quick-connect latches for interlocking connectivity.
Figura 6: A fully assembled FLEX STACK PACK system with multiple units and attachments, illustrating the modularity and attachment-ready design.
4. Manteniment
Regular maintenance ensures the longevity and optimal performance of your tool box.
- Neteja: Netegeu l'exterior amb un anunciamp drap i sabó suau segons calgui. Eviteu productes químics agressius o netejadors abrasius.
- Guies de calaix: The rust-resistant rails are designed for durability. If smooth operation is affected by debris, clean the rails thoroughly. Lubrication is generally not required but can be applied sparingly if necessary, using a silicone-based lubricant.
- Inspecció: Periodically inspect the latches, hinges, and overall structure for any signs of wear or damage.
5. Solució De Problemes
This section addresses common issues you might encounter with your FLEX STACK PACK FS1105 3-Drawer Tool Box.
| Problema | Causa possible | Solució |
|---|---|---|
| Drawers do not open or close smoothly. | Debris in drawer rails; drawers overloaded. | Clean debris from rails. Reduce load in drawers to within the 70 lb. capacity. |
| Drawers do not auto-lock. | Drawer not fully closed; latch mechanism obstructed. | Ensure drawer is pushed in completely until a click is heard. Check for obstructions around the latch mechanism. |
| STACK PACK units do not connect securely. | Latches misaligned or obstructed. | Verify proper alignment of units. Clear any debris from quick-connect latches. |
6. Especificacions
| Característica | Detall |
|---|---|
| Número de model | FS1105 |
| Marca | FLEXIÓ |
| Material | Polipropilè |
| Color | Gris/negre |
| Dimensions del producte (L x A x A) | 22" x 15.1" x 16.3" |
| Pes de l'article | 32.7 lliures |
| Capacitat de càrrega | 70 lliures |
| Nivell de resistència a l'aigua | Impermeable |
| Nombre de calaixos | 3 |
| Característiques clau | Auto-locking drawers, Durable rust-resistant rails, Attachment-ready, Onboard security bar, Removable dividers, Quick-connect latches, Impact protection |
| UPC | 195532300329 |
7. Garantia i Suport
7.1 Garantia limitada
The FLEX STACK PACK FS1105 3-Drawer Tool Box is covered by a one-year limited warranty. To activate your warranty, register your product within 30 days of purchase at registermyflex.com. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
7.2 Atenció al client
For technical assistance, warranty claims, or general inquiries, please visit the official FLEX website or contact their customer service department. Refer to your product packaging or the FLEX weblloc web per obtenir la informació de contacte més actualitzada.
