Manual d'usuari del gravador làser ATOMSTACK X12 Pro de 2a generació

1. Producte acabatview

The ATOMSTACK X12 Pro 2nd Generation Laser Engraver is a high-performance engraving and cutting machine designed for various materials. It features a 12000mW (12W) optical power laser, a robust one-piece aluminum alloy frame, and advanced motion control for precise and efficient operation.

Imatge 1.1: The ATOMSTACK X12 Pro Laser Engraver actively engraving a detailed tiger image onto a wooden surface. The red laser module is visible, positioned over the material.

2. Informació de seguretat

WARNING: This product contains a Class 4 laser. Improper use can result in serious injury, including eye damage and skin burns. Always follow safety guidelines.

• Protecció ocular: Always wear the provided eye protection shields or glasses when operating the laser engraver. Never look directly at the laser beam.
• Ventilació: Feu funcionar la màquina en una zona ben ventilada per dissipar els fums i el fum produïts durant el gravat i el tall.
• Seguretat del material: Ensure the material being processed is safe for laser engraving/cutting and does not produce toxic fumes or flammable byproducts.
• Detecció d'inclinació: The machine is equipped with a gyroscope detection system. If the tilt angle exceeds 15°, an alarm will be triggered to enhance operational safety.
• Supervisió: Never leave the laser engraver unattended during operation.
• Parada d'emergència: Familiaritzeu-vos amb la ubicació i el funcionament del botó d'aturada d'emergència.

3. Configuració

The ATOMSTACK X12 Pro features a one-piece frame design, minimizing assembly requirements. The machine is calibrated prior to shipping, allowing for immediate use after connecting necessary components.

1. Desembalatge: Traieu amb cura el gravador làser i tots els accessoris de l'embalatge.
2. Col·locació: Place the machine on a stable, level, and heat-resistant surface in a well-ventilated area.
3. Connexions de cable: Connect all necessary cables, including the power cable and USB cable to your computer.
4. Instal·lació de programari: Download and install the recommended software (Lightburn, LaserGRBL, or the ATOMSTACK phone App) on your computer or mobile device. Follow the software-specific instructions for installation and initial setup.
5. Protecció ocular: Put on your safety glasses before powering on the device.

Imatge 3.1: The ATOMSTACK X12 Pro Laser Engraver shown being unboxed, highlighting its pre-assembled, installation-free design, ready for immediate use.

4. Instruccions de funcionament

4.1 Funcionament general

1. Encès: Connect the power adapter and turn on the machine.
2. Connexió de programari: Launch your chosen software (Lightburn, LaserGRBL, or ATOMSTACK App) and establish a connection with the engraver.
3. Col·locació del material: Place your material within the 365x305mm engraving area. Utilize the precise X and Y axis scales for accurate positioning.
4. Ajust del focus: Adjust the laser focus according to the material thickness and desired effect.
5. Cross Laser Positioning: Use the cross laser positioning feature for clear visibility of the laser's location and precise alignment of your project.
6. Disseny de càrrega: Importa o crea el teu disseny dins del programari.
7. Configuració dels paràmetres: Configure engraving or cutting parameters (speed, power, passes) based on the material type and desired outcome. Refer to material testing guides for optimal settings.
8. Inici de l'operació: Initiate the engraving or cutting process from the software. Monitor the operation closely.

Imatge 4.1: Un acabatview highlighting key features of the ATOMSTACK X12 Pro, including its installation-free setup, high-speed operation, precision, 12W laser output, and software control options.

4.2 Capacitats de gravat i tall

The X12 Pro is equipped with a 12W optical power laser, formed by combining two 6W lasers, resulting in an ultra-fine laser spot of 0.06x0.06mm. This allows for high-density laser processing.

• Velocitat de gravat: The maximum engraving speed can reach 600mm/s, providing efficient project completion.
• Gruix de tall: Capable of cutting 3-12mm thick wooden boards or 5mm thick black acrylic in a single pass. With multiple passes, it can cut up to 15mm thick materials.
• Materials suportats: The machine can engrave and cut a wide range of materials including paper, wood (basswood, pine, paulownia, MDF), leather, acrylic, metal (mirror stainless steel), ceramic, and glass.

Imatge 4.2: Examen visualamples demonstrating the maximum cutting thickness achievable with the ATOMSTACK X12 Pro's 2nd generation blue laser on materials such as black acrylic, balsa, paulownia, MDF, basswood plywood, pine wood, stainless steel sheet, and vinyl.

Imatge 4.3: An illustration of the diverse materials compatible with the ATOMSTACK X12 Pro, such as basswood, acrylic, pine wood, paulownia, bamboo, and leather, being used for various crafting projects.

4.3 Power Failure Recovery

The ATOMSTACK X12 Pro includes an automatic power failure recovery system. This feature records the engraving position, allowing the machine to quickly relocate and continue engraving from where it stopped after a power interruption. This function must be activated from the ATOMSTACK App or an optional display board.

5. Manteniment

Regular maintenance ensures optimal performance and longevity of your laser engraver.

• Neteja de la lent: Periodically clean the laser lens with a specialized lens cleaning solution and cloth to maintain laser power and precision.
• Neteja de la màquina: Keep the engraving area and machine frame free from dust, debris, and material residue. Use a soft brush or compressed air.
• Lubricació: Inspect the linear guide and other moving parts. Lubricate as recommended in the detailed product manual (if available) to ensure smooth operation.
• Inspecció del cable: Regularly check all cables for wear or damage. Replace any damaged cables immediately.

For detailed maintenance procedures, refer to the comprehensive manual provided by ATOMSTACK or visit their official support weblloc.

6. Solució De Problemes

If you encounter issues with your ATOMSTACK X12 Pro, consider the following common troubleshooting steps:

• La màquina no s'encén: Ensure the power cable is securely connected to both the machine and a working power outlet. Check the power switch.
• Problemes de connexió de programari: Verify that the USB cable is properly connected to both the engraver and your computer. Restart the software and the machine. Ensure correct drivers are installed.
• El làser no dispara/sortida feble: Check the laser lens for cleanliness. Ensure laser power settings in the software are correct. Verify the laser module is securely attached.
• Inaccurate Engraving/Cutting: Check for loose belts or components. Ensure the material is securely fixed. Verify the focus is correctly set.
• Alarma activada: If the tilt alarm sounds, check the machine's stability and ensure it is on a level surface.

If problems persist after attempting these steps, contact ATOMSTACK customer support for further assistance.

7. Especificacions

8. Garantia i Suport

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official ATOMSTACK weblloc web. Els termes i condicions de la garantia poden variar segons la regió i el distribuïdor.

For technical support, product inquiries, or to access additional resources, please visit the official ATOMSTACK store or contact their customer service department:

• Botiga oficial d'ATOMSTACK: https://www.amazon.com/stores/ATOMSTACKOfficial/page/DFF40961-DDCE-46AF-ACCE-FE62E9000DDA
• Consulteu la informació de contacte que es proporciona a l'embalatge del producte per obtenir informació sobre els canals d'assistència directa.