Introducció
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your NZXT Kraken 280 RGB AIO CPU Liquid Cooler and NZXT H5 Flow Compact ATX Mid-Tower PC Gaming Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.
Producte acabatview
NZXT Kraken 280 RGB AIO Liquid Cooler
The Kraken 280 RGB is an all-in-one liquid cooling solution designed for high-performance CPU cooling. It features a 280mm radiator, two F140 RGB Core fans, and a pump with a customizable 1.54-inch square LCD display.
Image: The NZXT Kraken 280 RGB AIO Liquid Cooler, showcasing its 280mm radiator, two F140 RGB Core fans illuminated with rainbow colors, and the pump block with its integrated LCD display showing a temperature reading.
- Pantalla LCD: 1.54" square LCD with 240x240 resolution, 30 Hz refresh rate, and 300 cd/m² brightness for displaying custom images, GIFs, performance metrics, and more via NZXT CAM software.
- Bomba d'alt rendiment: Asetek pump operating up to 2,800 RPM for efficient and quiet coolant circulation.
- RGB Core Fans: F140 RGB Core Fans with fluid dynamic bearings provide optimal static pressure and airflow, complemented by vivid RGB lighting.
NZXT H5 Flow Compact ATX Mid-Tower PC Gaming Case
The H5 Flow is a compact ATX mid-tower case engineered for high airflow, featuring perforated front and top panels, a tempered glass side panel, and dedicated cooling for the GPU.
Image: The NZXT H5 Flow PC case in white, viewed from the front-right, showing its perforated front panel, tempered glass side panel, and internal layout designed for component installation.
- High Airflow Design: Perforated front and top panels facilitate excellent airflow for cooling components.
- Dedicated GPU Fan: An angled 120mm fan positioned to provide direct cooling to the graphics card.
- Suport de refrigeració: Supports up to 280mm radiators in the front, 240mm on top, and 120mm in the rear. Includes two pre-installed 120mm fans.
- Gestió de cables: Designed with features to simplify cable routing and management.
Guia de configuració i instal·lació
This section outlines the general steps for installing the NZXT Kraken 280 RGB AIO Liquid Cooler and assembling components within the NZXT H5 Flow PC Case. Refer to specific component manuals for detailed instructions.
1. Preparing the H5 Flow Case
- Desempaquetar la caixa: Carefully remove the H5 Flow case from its packaging.
- Elimina els panells: Remove the tempered glass side panel and the rear side panel to access the interior.
- Install Standoffs (if necessary): Ensure motherboard standoffs are correctly installed for your motherboard's form factor (e.g., ATX, Micro ATX).
Imatge: Una imatge interna view of the NZXT H5 Flow PC case with a motherboard, GPU, and the Kraken AIO cooler installed, illuminated with purple RGB lighting, demonstrating component placement.
2. Installing the Kraken 280 RGB AIO Cooler
- Preparació del sòcol de la CPU: Apply thermal paste to your CPU if not pre-applied on the cooler's cold plate.
- Muntar el radiador: The Kraken 280 RGB radiator can be mounted in the front or top of the H5 Flow case.
- Front Mount: Secure the radiator and fans to the front mounting points. The H5 Flow supports up to a 280mm radiator in the front.
- Muntatge superior: The H5 Flow supports up to a 240mm radiator on top. For the 280mm Kraken, front mounting is generally recommended for optimal compatibility.
- Install Pump Block: Carefully place the pump block onto the CPU, aligning it with the mounting holes on the motherboard. Secure it with the appropriate mounting hardware for your CPU socket (Intel/AMD).
- Connectar els cables:
- Connect the pump's power cable to the CPU_FAN or AIO_PUMP header on your motherboard.
- Connect the RGB and fan cables to the appropriate headers on your motherboard or a compatible RGB controller/hub.
- Connect the USB cable from the pump to an available internal USB 2.0 header on your motherboard for NZXT CAM software control.
Image: The NZXT Kraken 280 RGB AIO Liquid Cooler with its fans and pump block illuminated in a vibrant purple color, demonstrating the customizable RGB lighting capabilities.
3. Component Installation in H5 Flow
- Placa base: Install your motherboard into the case, securing it with screws.
- Targeta gràfica: Install your graphics card into the PCIe slot. The H5 Flow supports GPUs up to 365mm in length. Utilize the dedicated 120mm GPU fan for enhanced cooling.
- Unitats d'emmagatzematge: Install SSDs/HDDs into the designated drive bays.
- Font d'alimentació: Install the power supply unit (PSU) into its compartment.
- Gestió de cables: Route all cables neatly behind the motherboard tray using the provided cable management channels and tie-down points.
Image: A diagram illustrating the airflow within the NZXT H5 Flow PC case. Blue arrows indicate cool air intake from the perforated front and bottom, while purple arrows show warm air exhaust from the top and rear, highlighting the efficient cooling design.
Instruccions de funcionament
NZXT CAM Software
The NZXT CAM software is essential for controlling and monitoring your Kraken 280 RGB AIO cooler and other NZXT devices. Download the latest version from the official NZXT weblloc (nzxt.com/cam).
- Personalització de la pantalla LCD: Use CAM to upload custom images, GIFs, or select from pre-set displays for performance metrics (CPU/GPU temperature, liquid temperature), music visualization, or web contingut.
- Control d'il·luminació RGB: Adjust fan and pump RGB lighting effects, colors, and brightness.
- Control del ventilador i la bomba: Monitor fan speeds and pump RPM. Set custom fan curves based on temperature thresholds for optimal cooling and noise levels.
- Monitorització del sistema: View real-time system performance data, including CPU/GPU temperatures, usage, and fan speeds.
Image: A collage of various display options for the NZXT Kraken LCD, including CPU usage, liquid temperature, custom images, and system performance metrics, demonstrating the versatility of the customizable screen.
General PC Operation
Once assembled, ensure all cables are securely connected before powering on your system. Monitor temperatures using NZXT CAM or other system monitoring software to confirm proper cooling performance.
Manteniment
Regular maintenance helps ensure the longevity and optimal performance of your NZXT components.
- Dust Cleaning (H5 Flow Case):
- Periodically clean dust filters (front and bottom) to maintain optimal airflow.
- Use compressed air to clear dust from internal components, especially fans and radiator fins.
- Radiator Cleaning (Kraken 280 RGB):
- Gently clean dust accumulation from the radiator fins using a soft brush or compressed air. Ensure fans are not spinning during cleaning.
- Manteniment del ventilador:
- Inspect fan blades for dust buildup and clean as needed.
- Ensure fan cables are securely connected and not obstructing fan rotation.
- Actualitzacions de programari: Regularly check for updates to NZXT CAM software and your motherboard's BIOS/drivers to ensure compatibility and performance improvements.
Resolució de problemes
This section addresses common issues you might encounter. For more complex problems, refer to the NZXT support weblloc o contacteu amb el servei d'atenció al client.
| Problema | Causa possible | Solució |
|---|---|---|
| Kraken LCD Display Not Working / Blank |
|
|
| Temperatures altes de la CPU |
|
|
| RGB Lighting Not Working / Incorrect |
|
|
| Poor Airflow in H5 Flow Case |
|
|
Especificacions
NZXT Kraken 280 RGB (RL-KR280-W1)
- Radiator Size: 280 mm
- Fans: 2 x F140 RGB Core Fans
- Velocitat de la bomba: Up to 2,800 RPM (Asetek pump)
- Pantalla LCD: 1.54" Square, 240x240 resolution, 30 Hz refresh rate, 300 cd/m² brightness
- Il·luminació: Customizable RGB
- Programari de control: NZXT CAM
NZXT H5 Flow PC Gaming Case
- Tipus de cas: Compact ATX Mid-Tower
- Compatibilitat de la placa base: ATX, Micro ATX, Mini-ITX
- Material: Acer, Vidre temperat
- Included Fans: 2 x 120mm (pre-installed)
- Suport del radiador: Front: Up to 280mm; Top: Up to 240mm; Rear: 120mm
- Liquidació de la GPU: Fins a 365 mm
- Dedicated GPU Fan: 1 x 120mm (angled)
- Color: Blanc
Nota: Les especificacions estan subjectes a canvis sense previ avís.
Garantia i Suport
For warranty information, technical support, or to register your product, please visit the official NZXT support weblloc:
Please have your product model number (RL-KR280-W1 for Kraken 280 RGB, H5 Flow for the case) and proof of purchase ready when contacting support.
