Carson Easy Tyrann 670 Rescue RC Helicopter User Manual

Informació important de seguretat

ADVERTIMENT! Not suitable for children under 16 years of age. Please retain these instructions for future reference. Illustrations may differ from the actual product contained in the packaging. TAMIYA-CARSON reserves the right to make improvements and modifications at any time.

Always operate the helicopter in a safe environment, away from people, animals, and obstacles. Do not fly near power lines, roads, or water. Ensure the battery is fully charged before each flight. Do not attempt to modify the helicopter or its components.

Producte acabatview

The Carson Easy Tyrann 670 Rescue is a 100% Ready-to-Fly (RTF) remote-controlled helicopter designed for ease of use, making it suitable for beginners. It features an electronic automatic take-off and landing function, three adjustable speed levels for varied flight agility, and switchable LED lights for enhanced visibility.

Contingut del paquet

• Carson Easy Tyrann 670 Rescue RC Helicopter
• Transmissor de control remot de 2.4 GHz
• Cable de càrrega USB
• Spare Main Rotor Blades
• Pala de recanvi del rotor de cua
• Petit tornavís
• 4 piles AA (per al comandament a distància)

Image: The Carson Easy Tyrann 670 Rescue RC Helicopter, its remote control, USB charging cable, spare rotor blades, a small screwdriver, and four AA batteries.

Configuració

1. Charging the Helicopter Battery

1. Ensure the helicopter's power switch is in the OFF position.
2. Connecteu l'extrem petit del cable de càrrega USB al port de càrrega de l'helicòpter.
3. Connect the USB end of the cable to any standard USB power source (e.g., computer USB port, USB wall adapter).
4. The charging indicator light on the USB cable will illuminate (color may vary) during charging.
5. Charging typically takes approximately 60-90 minutes. The indicator light will turn off or change color when charging is complete.
6. Do not overcharge the battery. Disconnect the cable once charging is complete.

2. Instal·lació de les bateries del comandament a distància

1. Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
2. Using the provided screwdriver, open the battery compartment cover.
3. Introduïu les quatre (4) piles AA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
4. Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.

Instruccions de funcionament

1. Vinculació del comandament a distància

1. Ensure the helicopter battery is charged and the remote control has fresh batteries.
2. Col·loqueu l'helicòpter sobre una superfície plana i anivellada.
3. Turn on the helicopter's power switch. The helicopter's lights will flash.
4. Engegueu l'interruptor d'alimentació del comandament a distància.
5. Push the left joystick (throttle) all the way up, then pull it all the way down. The remote control will beep, and the helicopter's lights will stop flashing, indicating successful pairing.

2. Automatic Take-off and Landing

• Enlairament: After pairing, press the "Take Off" button on the remote control. The helicopter will automatically ascend to a stable hovering altitude.
• Aterratge: During flight, press the "Land" button. The helicopter will automatically descend and land gently.

3. Controls de vol

• Joystick esquerre (accelerador): Push up to increase altitude, pull down to decrease altitude.
• Right Joystick (Directional): Empeny endavant per volar endavant, tira enrere per volar enrere. Empeny a l'esquerra per volar a l'esquerra, empeny a la dreta per volar a la dreta.
• Botons de retallar: Use the small trim buttons next to the joysticks to fine-tune the helicopter's stability if it drifts in any direction during hover.

4. Modes de velocitat

The helicopter has three speed levels for different flight experiences. Press the speed button on the remote control to cycle through the modes (e.g., slow, medium, fast). A beep or light indicator on the remote may confirm the selected speed.

5. Llums LED

The helicopter's LED lights can be switched on or off using the dedicated light button on the remote control. This feature is particularly useful for flying in low-light conditions.

6. Parada d'emergència

In case of an emergency, press and hold the "Long Press Emergency Stop" button on the remote control to immediately cut power to the rotors. Use this function only when necessary to prevent damage or injury.

Manteniment

Neteja

Wipe the helicopter and remote control with a soft, dry cloth after each use. Do not use water or chemical cleaners, as this may damage the electronic components.

Substitució de la pala del rotor

If rotor blades become damaged, they can be replaced using the spare blades provided. Carefully remove the small screw holding the damaged blade in place, replace it with a new one, and secure the screw. Ensure the correct blade (A or B) is installed in its designated position.

Resolució de problemes

Especificacions

• Número de model: 500507183
• Dimensions (L x A x A): 71 x 12 x 25 cm
• Pes: 1.18 kg
• Edat recomanada: 16 anys i més
• Helicopter Power Source: Bateria recarregable (via USB)
• Remote Control Power Source: 4x AA Alkaline Batteries (included)
• Material principal: Plastic, Aluminum (chassis, tail boom)
• Color: Multicolor
• Approximate Flight Duration: Fins a 10 minuts
• Característiques especials: Automatic Take-off/Landing, 3 Speed Levels, Switchable LED Lights, Gyroscope Stabilization, 2.4 GHz Interference-Free Transmitter.

Garantia i Suport

For warranty information, technical support, or spare parts inquiries, please refer to the official Carson website or contact your local retailer. Please have your model number (500507183) and proof of purchase ready when contacting support.