Manual d'instruccions del kit d'equip Team Associated RC10B7

1. Introducció

The Team Associated RC10B7 represents the next generation in 1:10 scale 2WD off-road buggy design, building upon 40 years of innovation. This kit incorporates advanced features such as new long-arm suspension geometry, a weight-centralized electronics layout, KPI adjustable steering blocks, and enhanced tunability throughout the chassis. These design elements contribute to improved grip, increased corner speed, and an overall more predictable driving experience compared to previous models.

Figura 1: Un muntatge view of the Team Associated RC10B7 2WD off-road buggy, showcasing its sleek body design and overall chassis layout.

2. Característiques clau

• 5-Gear Laydown Transmission: This configuration positions the motor's weight closer to the center of the car, optimizing weight distribution for improved handling.
• Long-Arm Suspension Geometry: Designed to enhance grip and predictability across various track conditions.
• KPI Adjustable Steering and Caster Blocks: Allows for precise tuning of steering feel and response. Three options are included in the kit for customization.
• Height Adjustable Aluminum Front Bulkhead: Provides further tuning options for the front roll center.
• High Volume Gear Differential: Improves the consistency of differential action over extended run times. Compatible with LTC internal diff gears from the RC10B74.2.

Figura 2: Primer pla view of the front suspension, showing the KPI adjustable steering block and associated linkages, crucial for fine-tuning steering response.

Figure 3: Detail of the 5-gear laydown transmission and the low-profile motor mount, centralizing weight for enhanced performance.

3. Muntatge i muntatge

The RC10B7 is a team kit designed for experienced hobbyists. Assembly requires careful attention to detail and adherence to the included detailed assembly manual (not part of this document). Ensure all components are correctly installed and fasteners are tightened to specifications. Proper setup is critical for optimal performance.

3.1 Instal·lació electrònica

This kit does not include electronic components. Users must select and install their own motor, electronic speed controller (ESC), servo, receiver, and battery. Follow the manufacturer's instructions for each electronic component for proper installation and calibration. Ensure wiring is neat and secure to prevent interference or damage.

3.2 Ajust de la suspensió

The RC10B7 offers extensive suspension tunability. Adjustments include shock oil viscosity, spring rates, ride height, camber, toe, and anti-roll bar settings. Refer to the main assembly manual for detailed instructions on how to adjust these parameters to suit different track conditions and driving styles.

Figure 4: Close-up of the front bulkhead, featuring the integrated anti-roll bar system for improved handling and reduced chassis roll.

4. Instruccions de funcionament

Before operating your RC10B7, ensure all components are securely fastened, the battery is fully charged, and radio communication is properly established. Always operate the vehicle in a safe, open area, away from people, pets, and obstacles. Familiarize yourself with the controls before attempting high-speed maneuvers.

4.1 Pre-Run Checklist

• Comproveu el nivell de càrrega de la bateria.
• Check all wheel nuts and suspension screws for tightness.
• Inspect tires for wear and proper mounting.
• Confirm steering and throttle response are correct and smooth.
• Ensure body clips are securely in place.

4.2 Pautes de funcionament segur

• Avoid operating in wet conditions unless the electronics are specifically rated as waterproof.
• Do not operate near public roads or in areas with pedestrian traffic.
• Maintain a clear line of sight to the vehicle at all times.
• Allow the motor and ESC to cool down between runs to prevent overheating.

5. Manteniment

Regular maintenance is essential to ensure the longevity and performance of your RC10B7. After each use, perform a thorough inspection and cleaning.

5.1 Post-Run Cleaning

• Remove dirt and debris from the chassis, suspension, and drivetrain using a soft brush or compressed air.
• Inspect for any loose screws, damaged parts, or signs of wear.
• Clean and lubricate moving parts as necessary, such as universal joints and bearings.

5.2 Inspecció periòdica

• Check shock oil levels and replace if necessary.
• Inspect differential fluid and gears for wear.
• Examine tires for excessive wear and replace if traction is compromised.
• Ensure all electrical connections are clean and secure.

6. Solució De Problemes

This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive assembly manual or contact Team Associated support.

6.1 Problemes comuns i solucions

• Sense energia: Check battery charge, ESC connection, and power switch.
• Pèrdua de control: Verify radio transmitter battery, receiver connection, and antenna placement. Check for damaged steering or suspension components.
• El motor no respon: Inspect motor wires, ESC settings, and ensure the motor is not seized.
• Mala manipulació: Review suspension settings (camber, toe, ride height), tire condition, and shock performance.

7. Especificacions

8. Garantia i Suport

For information regarding warranty coverage, technical support, or replacement parts for your Team Associated RC10B7 Team Kit, please refer to the official Team Associated weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.